journal article·2022-01

Effect of fiber orientation on the stresses generated in dental crowns made of glass fiber composites

Dipti Nikam, Abbas S. Milani

Publisher page

Abstract

Abstract Traditional ceramic crowns occasionally experience chipping and cracking due to their brittle nature. Use of a low stiffness, biocompatible custom-design material and strengthening the crown in the direction of the loading are known as possible measures to help reducing these failure modes. This study aims to numerically analyze and compare a single implant supported crown made of two material options – ceramic and a new glass fiber dental composite (GFDC). Specifically, we aim to assess whether the fiber orientation in the composite crowns has a notable effect on the structural integrity of the implant under loading. It was observed that fibers aligned to the tooth long axis as well as through the thickness, can notably help in reducing the maximum stresses of the structure (up to 40% at high chewing angles). The addition of the veneering layer showed a higher stability of the GFDC crown, closer to that of the natural tooth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Erosion and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Numerical study of effect of elastomeric stress absorbers on stress reduction in bone-dental implant interface10.1590/1678-775720140086 ↗
2. Canadian Dental Association. The State of Oral Health in Canada. 2017. https://www.cda-adc.ca/stateoforalhealth/_files/thestateoforalhealthincanada.pdf.
3. Long-term Survival and Success of Oral Implants in the Treatment of Full and Partial Arches: A 7-year Prospective Study with the ITI Dental Implant System
4. Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental prostheses10.1016/j.dental.2011.09.012 ↗
5. CAD-FEA modeling and analysis of different full crown monolithic restorations10.1016/j.dental.2018.06.024 ↗
6. Samal P, Mohanty SS, Panigrahi M, Mohanty S. Finite element analysis of the dental crown: A case study of alumina based incisor. IOP Conf. Ser. Mater. Sci. Eng., vol. 410, 2018. 10.1088/1757-899X/410/1/012003.10.1088/1757-899X/410/1/012003 ↗
7. Influence of various materials on biomechanical behavior of endocrown-restored, endodontically-treated mandibular first molar: A 3D-finite element analysis10.1007/s11595-015-1204-8 ↗
8. Upadhyaya V, Bhargava A, Parkash H, Chittaranjan B, Kumar V. A finite element study of teeth restored with post and core: Effect of design, material, and ferrule. Dent Res J (Isfahan) 2016;13. 10.4103/1735-3327.182182.10.4103/1735-3327.182182 ↗
9. Finite element analysis of stresses in dental crowns
10. Bahrami B, Shahrbaf S, Mirzakouchaki B, Ghalichi F, Ashtiani M, Martin N. Effect of surface treatment on stress distribution in immediately loaded dental implants - A 3D finite element analysis. Dent Mater 2014;30. 10.1016/j.dental.2014.01.012.10.1016/j.dental.2014.01.012 ↗
11. The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns10.1016/j.dental.2004.03.013 ↗
12. Three-dimensional finite element analysis of molars with thin-walled prosthetic crowns made of various materials10.1016/j.dental.2011.11.019 ↗
13. Rohrle O, Saini H, Ackland DC. Occlusal loading during biting from an experimental and simulation point of view. Dent Mater 2018;34. 10.1016/j.dental.2017.09.005.10.1016/j.dental.2017.09.005 ↗
14. De Jager N, De Kler M, Van Der Zel JM. The influence of different core material on the FEA-determined stress distribution in dental crowns. Dent Mater 2006;22. 10.1016/j.dental.2005.04.034.10.1016/j.dental.2005.04.034 ↗
15. Dynamic Shear Modulus in Torsion of Human Dentin and Enamel10.4012/dmj.8.223 ↗
16. Celik Koycu B, Imirzalioglu P, Ozden UA. Three-dimensional finite element analysis of stress distribution in inlay-restored mandibular first molar under simultaneous thermomechanical loads. Dent Mater J 2016;35. 10.4012/dmj.2014-341.10.4012/dmj.2014-341 ↗
17. Finite element analysis of stress distribution in intact and porcelain veneer restored teeth10.1080/10255842.2011.561013 ↗
18. FEM and von Mises analysis on prosthetic crowns structural elements: Evaluation of different applied materials10.1155/2017/1029574 ↗
19. Benazzi S, Nguyen HN, Kullmer O, Hublin JJ. Unravelling the Functional Biomechanics of Dental Features and Tooth Wear. PLoS One 2013;8. 10.1371/journal.pone.0069990.10.1371/journal.pone.0069990 ↗
20. Finite element analysis of stress concentration in three popular brands of fiber posts systems used for maxillary central incisor teeth10.4103/0972-0707.85819 ↗
21. Three-dimensional finite element analysis of stress distribution in a tooth restored with metal and fiber posts of varying diameters: An in-vitro study10.4103/0972-0707.153061 ↗
22. Virtual analysis of stresses in human teeth restored with esthetic posts10.1590/S1516-14392008000400014 ↗
23. Tjulkins F. Human jaw CAD 2017. https://grabcad.com/library/peri-implantitis-study-1 (accessed March 7, 2021).
24. Gupta S. Incisor tooth CAD 2017. https://grabcad.com/library/tooth-2 (accessed March 7, 2021).
25. Design of Dental Crowns Using Glass Fiber Composites
26. Design and Analysis of a New Dental Implant using Finite Element Method
27. Stress appraisal in periodontium of maxillary first molar using various intrusive forces: A finite element analysis study10.4103/2321-3825.131120 ↗
28. Reliability of FEA on the results of mechanical properties of materials10.1590/0103-6440201300639 ↗
29. Gattinger J, Bullemer CN, Harrysson OLA. Patient specific root-analogue dental implants – Additive manufacturing and finite element analysis. Curr Dir Biomed Eng 2016;2. 10.1515/cdbme-2016-0025.10.1515/cdbme-2016-0025 ↗
30. Three-dimensional finite element analysis of the stress distribution pattern in a mandibular first molar tooth restored with five different restorative materials
31. Finite element analysis of the biomechanical effects of PEEK dental implants on the peri-implant bone10.1016/j.jbiomech.2014.11.017 ↗
32. 3-d finite element analysis of the effects of post location and loading location on stress distribution in root canals of the mandibular 1st molar10.1590/1678-7757-2016-0406 ↗
33. Stress distribution in the mandibular central incisor and periodontal ligament while opening the bite: A finite element analysis
34. Strength analysis of a three-unit dental bridge framework with the Finite Element Method
35. Archangelo KC, Guilardi LF, Campanelli D, Valandro LF, Borges ALS. Fatigue failure load and finite element analysis of multilayer ceramic restorations. Dent Mater 2019;35. 10.1016/j.dental.2018.10.006.10.1016/j.dental.2018.10.006 ↗
36. Zhang Y, Lawn BR. Evaluating dental zirconia. Dent Mater 2019;35. 10.1016/j.dental.2018.08.291.10.1016/j.dental.2018.08.291 ↗