journal article·2020-07Open access

Vibration and stress analysis of orthotropic laminated panels by active face prismatic finite element

Rogério Carrazedo, Rodrigo Ribeiro Paccola, Humberto Breves Coda, Rafael Correa Salomão

Abstract

Abstract In this paper a strategy for the stress analysis of sandwich plates and shells employing the active face triangular-based prismatic finite element is provided, which combines three-dimensional membrane elements (called active face) with solid elements providing stiffening cells, usually called honeycomb. The connection of solid and active face elements is done by direct nodal correspondence, keeping the total number of degrees of freedom unaltered, which makes the technique highly economical from the numerical point of view. Orthotropic properties are specially addressed, which are important for material failure criteria studies. The accuracy of the active face prismatic finite element is also evaluated in the calculation of natural frequencies of honeycomb sandwich panels for acoustic vibration isolation purposes, for instance. Results for orthotropic sandwich plates and shells are presented and compared with established commercial software and literature results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Structure Analysis and Optimization · Structural Analysis and Optimization · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Reddy · 2004
2. Influence of rotatory inertial and shear on flexural motions of isotropic, elastic plates10.1115/1.4010217 ↗
3. A higher order theory of plate deformation – part 2: laminated plates10.1115/1.3424155 ↗
4. A simple higher-order theory for laminated composite plates10.1115/1.3167719 ↗
5. Higher-order layerwise laminate theory for the prediction of interlaminar shear stresses in thick composite and sandwich composite plates10.1016/j.compstruct.2007.12.002 ↗
6. A new C0 higher-order layerwise finite element formulation for the analysis of laminated and sandwich plates10.1016/j.compstruct.2015.04.034 ↗
7. On the physical significance of higher order kinematic and static variables in a three-dimensional shell formulation10.1016/S0020-7683(99)00321-2 ↗
8. Assessment of shear deformation theories for multilayered composite plates10.1115/1.3152418 ↗
9. The effect of transverse shear deformation in the bending of laminated plates10.1177/002199836900300316 ↗
10. Note on the effect of transverse shear deformation in laminated anisotropic plates10.1016/0045-7825(79)90018-5 ↗
11. Finite element evaluation of single-layer and multi-layer theories for the analysis of laminated plates10.1016/0263-8223(94)00065-4 ↗
12. Static deformations and vibration analysis of composite and sandwich plates using a layerwise theory and multiquadrics discretizations10.1016/j.enganabound.2005.07.004 ↗
13. Layerwise mixed least-squares finite element models for static and free vibration analysis of multilayered composite plates10.1016/j.compstruct.2009.07.005 ↗
14. Efficient Hybrid-EAS solid element for accurate stress prediction in thick laminated beams, plates, and shells10.1016/j.cma.2012.07.025 ↗
15. Through-the-thickness stress predictions for laminated plates of advanced composite materials10.1002/nme.1620211003 ↗
16. Estimation of interlaminar stresses in fibre reinforced composite cylindrical shells10.1016/0045-7949(91)90092-Z ↗
17. Nonlinear composite shell element with continuous interlaminar shear stresses10.1007/BF00370134 ↗
18. Nonlocal nonlinear formulations for bending of classical and shear deformation theories of beams and plates10.1016/j.ijengsci.2010.09.020 ↗
19. On the three dimensional analysis of thick laminated plates10.1016/0022-460X(83)90637-5 ↗
20. Three-dimensional elasticity solution for uniformly loaded cross-ply laminates and sandwich plates10.1177/1099636207065675 ↗
21. Review and assessment of various theories for modeling sandwich composites10.1016/j.compstruct.2007.08.007 ↗
22. A review on plate and shell theories for laminated and sandwich structures highlighting the Finite Element Method10.1016/j.compstruct.2016.02.036 ↗
23. Equivalent single layer theories for composite and sandwich structures: a review10.1016/j.compstruct.2017.07.090 ↗
24. Multilayer models for composite and sandwich structures
25. Assessment of continuum models for sandwich panel honeycomb cores10.1016/S0045-7825(96)01196-6 ↗
26. Metal sandwich plates with polymer foam-filled cores10.2140/jomms.2006.1.97 ↗
27. Effective elastic properties of foam-filled honeycomb cores of sandwich panels10.1016/j.compstruct.2010.04.015 ↗
28. A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part I: homogenization of core properties10.1016/j.compstruct.2014.07.057 ↗
29. Effective properties for sandwich plates with aluminium foil honeycomb core and polymer foam filling – static and dynamic response10.1016/j.commatsci.2010.04.014 ↗
30. Analytical homogenization for stretch and bending of honeycomb sandwich plates with skin and height effects10.1016/j.compstruct.2014.10.028 ↗
31. Models for the elastic deformation of honeycombs10.1016/S0263-8223(96)00054-2 ↗
32. Effective elastic properties of periodic hexagonal honeycombs10.1016/j.mechmat.2015.07.008 ↗
33. Sandwich structures10.1115/1.3097295 ↗
34. A layerwise/solid-element method of the linear and free vibration analysis for the composite sandwich plates10.1016/j.compositesb.2013.04.031 ↗
35. Finite element models used to determine the equivalent in-plane properties of honeycombs10.1016/j.matpr.2016.03.013 ↗
36. Triangular based prismatic finite element for the analysis of orthotropic laminated beams, plates and shells10.1016/j.compstruct.2017.02.027 ↗
37. Development of a non-linear triangular prism solid-shell element using ANS and EAS techniques10.1016/j.cma.2013.07.014 ↗
38. Finite element analysis of air supported membrane structures10.1016/S0045-7825(99)00428-4 ↗
39. A simple FEM formulation for large deflection 2D frame analysis based on position description10.1016/j.cma.2004.01.005 ↗
40. Geometrical non-linear analysis of fiber reinforced elastic solids considering debounding10.1016/j.compstruct.2015.07.097 ↗
41. Large deformation analysis of functionally graded elastoplastic materials via solid tetrahedral finite elements10.1016/j.compstruc.2014.09.005 ↗
42. A direct FEM approach for particulate reinforced elastic solids10.1016/j.compstruct.2016.01.062 ↗
43. Active face prismatic positional finite element for linear and geometrically nonlinear analysis of honeycomb sandwich plates and shells10.1016/j.compstruct.2018.06.009 ↗
44. Continuous stress distribution following transverse direction for FEM orthotropic laminated plates and shell10.1016/j.apm.2016.03.005 ↗
45. HSL Mathematical Software Library. A collection of Fortran codes for large scale scientific computation. Science and Technology Facilities Council. Last access: 2019. Available from: http://www.hsl.rl.ac.uk.
46. Ogden · 1984
47. Zig-zag effect without degrees of freedom in linear and nonlinear analysis of laminated plates and shells10.1016/j.compstruct.2016.10.129 ↗
48. Continuous inter-laminar stresses for regular and inverse geometrically non-linear dynamic and static analyses of laminated plates and shells10.1016/j.compstruct.2015.05.056 ↗