Through-thickness reinforcement repair of delaminated carbon–epoxy panels
Source abstract
Abstract
This paper outlines a through-thickness reinforcement repair (TTRR) technique for delaminated polymer matrix composite (PMC) laminates. This involves drilling holes through the delaminated region and bonding pins into these holes. An experimental study was conducted to assess the effectiveness of the technique to restore the compression strength of laminates with a hole that were deliberately delaminated by controlled lateral loading. The TTRR technique was found to be highly effective, with eight pins bonded in a ring at the mid-span of the circular delamination restoring the compression strength to 93% that of the undamaged laminate. A further increase in pin density was found to provide no additional improvement in the repair efficacy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. An affordable methodology for replacing metallic aircraft panels with advanced composites10.1016/S1359-835X(02)00013-1 ↗
2. Fast, in situ repair of aircraft panel components10.2514/3.45788 ↗
3. Russell AJ, Bowers CP. Resin requirements for successful repair of delaminations, In: Proceedings of the 36th international SAMPE symposium, San Diego, CA, 15–18 April, 1991.
4. Compressive strength of delaminated and repaired composite plates10.1016/0254-0584(95)01633-6 ↗
5. Baker · 2004
6. Ultrasonic imaging of delamination damage around fastener holes in a graphite/epoxy composite