Dynamic mechanical analysis and thermoelasticity for investigating composite structural elements made with additive manufacturing
Source abstract
Abstract
Abstract Additive manufacturing (AM) has been widely used in recent years to build components and composite structural elements, since it allows complex shapes to be produced in one process step, quickly and with reduced weight. AM technology meets needs in many fields of production, including mechanics, industrial production, civil production, aeronautics, and medical implants. Nevertheless, during AM processes the material properties are affected by several setup parameters and the final mechanical characteristics are not completely defined yet. In this work, a measurement system is presented for defining the material mechanical characteristics of the printed components and composite structural elements. The parameters obtained are used for constructing a reliable finite element model to envisage the performance of the new structural elements before printing. The Dynamic Mechanical Analysis (DMA) for measuring the material mechanical properties and Thermoelasticity Strain Analysis (TSA) for validating the numerical model were used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Fully reversible reinforcement of softwood beams with unbounded composite plates10.1016/j.compstruct.2016.04.014 ↗
2. Engineered lumber: LVL and solid wood reinforced with natural fibres
3. Structural performance of natural fibers reinforced timber beams
4. Broken tempered laminated glass: non-linear discrete element modelling10.1016/j.compstruct.2015.12.050 ↗
5. A homogenized model for the post-breakage tensile behavior of laminated glass10.1016/j.compstruct.2016.07.052 ↗
6. Experimental analysis of adhesion phenomena in fibre-reinforced glass structures10.1016/j.compositesb.2016.06.074 ↗
7. Post-cracking behavior of reinforced glass beams
8. Sing · 2012
9. Kuang · 2001
10. The pivotal role of rapid manufacturing in the production, of cost-effective customised products10.1504/IJMASSC.2006.008630 ↗
11. Microstructuring by selective laser sintering of metallic powder10.1016/S0257-8972(99)00266-2 ↗
12. Degarmo · 2013 · 183
13. Uncertainty of slip measurements in a cutting system of converting machinery for diapers production10.1051/ijmqe/2015017 ↗
14. Gibson · 2009
15. 3D-printed multimaterial composites tailored for compliancy and strain recovery10.1016/j.compstruct.2017.09.049 ↗
16. Selective laser melting of iron-based powder10.1016/j.jmatprotec.2003.11.051 ↗
17. Design of an optical measurement system for dynamic testing of electrospindles
18. Dynamic mechanical analysis of novel polyurethane coating for military applications
19. Thermoelastic modal stress analysis
20. Comparison between digital image correlation and thermoelasticity for strain field analysis
21. Magnetic non destructive testing of blade tips10.1063/1.4907180 ↗
22. Measurement on rotating mechanical component by termoelasticity
23. Development of a new capacitive matrix for pressure distribution measurement10.1016/j.ergon.2013.11.012 ↗
24. Validation of a method for composition measurement of a non-standard liquid fuel for emission factor evaluation10.1016/j.measurement.2010.08.016 ↗
25. Becchetti M, Flori R, Marsili R, Rossi G. Stress and strain measurements by image correlation and thermoelasticity. In Society for experimental mechanics – SEM annual conference and exposition on experimental and applied mechanics, vol. 1, 2009, Albuquerque, NM, United States, 1–4 June 2009. p. 70–5. ISBN: 978-161567189-2; 978-161567189-2 SCOPUS: 2-s2.0-73349141710.
26. Development and experimental characterization of a new non contact sensor for blade tip timing
27. Metrological interpretation of a six sigma action for improving on line optical measurement of turbocharger dimensions in the automotive industry10.1177/0954407014539671 ↗
28. Uncertainty evaluation of high frequency image-based vibration measurement10.1016/j.measurement.2013.04.075 ↗
29. Biomimetics for next generation materials10.1098/rsta.2007.0006 ↗
30. A new diagnostic technique for ball screw actuators10.1016/j.measurement.2012.02.023 ↗
31. Thermoelastic stress analysis of the contact between a flat plate and a cylinder10.1016/j.measurement.2014.03.005 ↗
32. ANSYS Inc. AUTODYN user manual; 2013.
33. Static and dynamic analyses of laminated plates using a layerwise theory and a radial basis function finite element method10.1016/j.compstruct.2017.02.092 ↗
34. A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing10.1016/j.ijmachtools.2009.07.004 ↗
35. Comparison between two non-contact techniques for art digitalization10.1088/1742-6596/882/1/012005 ↗