Effect of thermal cycling heated Fibre Metal Laminates under static load
Source abstract
Abstract
Heated GLARE, a Fibre Metal Laminate with an integrated heater element, has been developed for de- or anti-icing systems in aircraft structures. Besides cyclic thermal loading these structures are also subjected to mechanical loading. To investigate the effect of static loading in addition to thermal cycling a series of tests have been performed on heated GLARE using a specifically designed mechanical load fixture and thermal cycling setup. Three different tensile stress levels, 150, 200 and 300 MPa, were used in combination with up to 36,000 thermal cycles between −20 and 50 °C. The effect of the combined thermo-mechanical loading was investigated by testing the interlaminar shear properties of each sample after thermal cycling. Thermal cycling under a 150 MPa static load showed much less reduction or even increase in strength compared to previously reported test results for thermal cycling only. This effect was not found for thermal cycling under the 200 and 300 MPa static load cases. On the contrary, in these cases more reduction in strength was found compared to test results after thermal cycling without static load.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Icing and De-icing Technologies · Smart Materials for Construction · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Thermal cycling of (heated) Fibre Metal Laminates10.1016/j.compstruct.2016.05.020 ↗
2. Effect of thermal cycling and ageing on heated Fibre Metal Laminates and glass-fibre epoxy composites
3. Effect of long-term thermal cycling and moisture on heated Fibre Metal Laminates and glass-fibre epoxy composites10.1016/j.compstruct.2018.11.068 ↗
4. Graafmans · 1995
5. The influence of temperature on crack growth in fiber metal laminates
6. Homan · 2001
7. Homan · 2002
8. Fatigue initiation in Fibre Metal Laminates10.1016/j.ijfatigue.2005.07.030 ↗
9. Ypma · 2001
10. Long term behaviour of Glare10.1023/A:1025589812963 ↗
11. Beumler · 2004
12. Broest · 2002
13. The effect of thermal fatigue on the mechanical properties of the novel fiber metal laminates based on aluminium-lithium alloy
14. Fibre Metal Laminates Centre of Competence.http://www.fmlc.nl [accessed 28.8.2018].
15. Challenges of the metallic fuselage
16. Glare design aspects and philosophies10.1023/A:1025581600897 ↗
17. Hagenbeek · 2005
18. Airplane and engine certification requirements in supercooled large drop, mixed phase and ice crystal icing conditions
19. A novel electro-thermal anti-icing system for fiber-reinforced polymer composite airfoils10.1016/j.coldregions.2012.12.003 ↗
20. Thermal strains in heated fibre metal laminates
21. Alderliesten · 2017
22. Physical aging of epoxy polymers and their composites10.1002/polb.22384 ↗
23. ASTM. Standard test method for short-beam strength of polymer matrix composite materials and their laminates. ASTM Standards, D2344/D2344M-13.