Eddy-current array-probe technique for imaging near-surface and deep-lying delaminations in multidirectional carbon fiber composites

Abstract An eddy-current array-probe method was proposed to visualize delamination occurring within multidirectional carbon fiber-reinforced plastics. First, samples with a near-surface delamination were scanned by a coil array probe comprising a single driver coil and multiple pickup coils, and the detectability of the delamination was evaluated by the signal-to-noise ratio. An appropriate selection of the image phase and the distance between the driver and pickup coils enabled detection of the delamination suppressing the signal variation in the non-defective region. Furthermore, the experimental results suggested that the distance between the driver coil and the most sensitive pickup coil correlated with the delamination size . Second, the array-probe technique was used to detect a delamination located at various depths. The detectability of the delamination was found to be strongly affected by the rotation angle of the array probe. The optimum probe rotation angle depended on the depth of the delamination, indicating that a delamination occurring in deeper regions can be visualized by setting an appropriate probe rotation angle.