journal article·2013-12

Modal identification of a GFRP-concrete hybrid footbridge prototype: Experimental tests and analytical and numerical simulations

José A. Gonilha, João R. Correia, Fernando A. Branco, Elsa Caetano, Álvaro Cunha

Publisher page

Abstract

Abstract The use of fibre reinforced polymer (FRP) structural elements, including glass fibre reinforced polymer (GFRP) pultruded profiles, has increased in the last few decades. The high potential of these materials for civil engineering structural applications, particularly for footbridges, stems from their high strength, low self-weight and good durability. However, when designing GFRP structures, the high deformability and the susceptibility to instability phenomena seldom allow the full exploitation of the GFRP material. In order to overcome these limitations, several hybrid structural systems have been proposed, namely GFRP-concrete hybrid systems. In this context, the evaluation of the dynamic characteristics of GFRP-concrete hybrid structural systems is very important, especially for footbridge applications, whose design is generally governed by pedestrian comfort criteria. This paper first presents modal identification experimental tests on a 6.0 m long and 2.0 m wide GFRP-concrete hybrid footbridge prototype, made of two I-shaped GFRP main girders and a thin steel fibre reinforced self-compacting concrete (SFRSCC) deck. The tests consisted of applying an excitation to the deck with an impact hammer and measuring both the applied excitation and the structure’s response. The natural modes of vibration, frequencies and damping were determined using (i) a conventional input–output modal identification technique, based on the Rational Fraction Polynomial method, and (ii) a simple output-only method directly based on the Fast Fourier Transform (FFT) of the response (mode frequencies only). In the second part of the paper, experimental data are compared with analytical and numerical simulations in order to assess the accuracy of such design tools in predicting the dynamic behaviour of GFRP-SFRSCC hybrid structures, in terms of mode shapes and frequencies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Engineering and Vibration Analysis · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Correia JR. GFRP pultruded profiles in civil engineering: hybrid solutions, bonded connections and fire behaviour, PhD Thesis in civil engineering. Instituto Superior Técnico, Technical University of Lisbon; 2008.
2. Effects of environmental aging on the properties of pultruded GFRP10.1016/S1359-8368(99)00013-X ↗
3. Artificial accelerated ageing of GFRP pultruded profiles made of polyester and vinylester resins: characterization of physical-chemical and mechanical damage10.1111/j.1475-1305.2011.00810.x ↗
4. System ductility and redundancy of FRP beam structures with ductile adhesive joints10.1016/j.compositesb.2005.05.001 ↗
5. Mechanical behavior of web–flange junctions of thin-walled pultruded I-profiles: an experimental and numerical evaluation10.1016/j.compositesb.2012.11.001 ↗
6. Fire protection systems for building floors made of pultruded GFRP profiles: Part 1: experimental investigations10.1016/j.compositesb.2010.09.018 ↗
7. GFRP pultruded flexural members: assessment of existing design methods10.2749/101686610793557771 ↗
8. First-order, buckling and post-buckling behaviour of GFRP pultruded beams part 1: experimental study10.1016/j.compstruc.2011.07.005 ↗
9. Lateral buckling of pultruded FRP beams10.1016/j.compositesb.2011.01.015 ↗
10. Dynamic response under pedestrian load of a GFRP-SFRSCC hybrid footbridge prototype: experimental tests and numerical simulation10.1016/j.compstruct.2012.07.029 ↗
11. Innovative design of FRP combined with concrete: short-term behaviour10.1061/(ASCE)0733-9445(1995)121:7(1069) ↗
12. Combined FRP reinforcement and permanent formwork for concrete members10.1061/(ASCE)1090-0268(1998)2:2(78) ↗
13. Flexural behavior of concrete-filled fiber-reinforced polymer circular tubes10.1061/(ASCE)1090-0268(2002)6:2(123) ↗
14. The use of advanced composites to form an economic structural unit10.1016/S0950-0618(02)00093-4 ↗
15. Flexural behavior of a hybrid FRP and lightweight concrete sandwich bridge deck10.1016/j.compositesa.2006.07.007 ↗
16. Flexural behaviour of GFRP–concrete hybrid beams with interconnection slip10.1016/j.compstruct.2005.06.003 ↗
17. GFRP-concrete hybrid cross-sections for floors of buildings10.1016/j.engstruct.2008.04.021 ↗
18. Flexural behaviour of multi-span GFRP-concrete hybrid beams10.1016/j.engstruct.2009.02.004 ↗
19. SÉTRA. Assessment of vibrational behaviour of footbridges under pedestrian loading, Technical guide. Service d’études techniques des routes et autoroutes (SÉTRA); 2006.
20. Human activity-induced vibration in slender structural systems10.2749/101686612X13291382991164 ↗
21. Modal parameter identification for a GFRP pedestrian bridge10.1016/j.compstruct.2006.12.008 ↗
22. Experimental and numerical assessment of the dynamic behaviour of a stress-ribbon bridge10.1680/stco.2004.5.1.29 ↗
23. Dynamic tests on a large cable-stayed bridge. An efficient approach10.1061/(ASCE)1084-0702(2001)6:1(54) ↗
24. Operational modal testing and FE model tuning of a cable-stayed bridge10.1016/j.engstruct.2011.02.046 ↗
25. Experimental modal analysis of the Garigliano cable-stayed bridge10.1016/S0267-7261(98)00022-0 ↗
26. Ambient and free vibration tests on the Milau Viaduct: evaluation of alternative processing strategies10.1016/j.engstruct.2012.06.038 ↗
27. Experimental modal analysis of civil engineering structures
28. Experimental dynamic characterization of an FRP composite bridge superstructure assembly10.1016/S0263-8223(01)00115-5 ↗
29. Han M-C, Wicks AL. On the application of the Forsythe orthogonal polynomials for global modal parameter estimation. In: Proc. 7th international modal analysis conference; 1989. p. 625–630.
30. ISO 527:1997. Plastics – Determination of tensile properties. International Organization for Standardization (ISO), Genève; 1997.
31. ASTM D 695. Standard test method for compressive properties of rigid plastics. American Society for Testing and Materials (ASTM), West Conshohocken, Pennsylvania; 2002.
32. 2000 · 362
33. LNEC Test Specification E 397. Determination of elasticity modulus in compression. National Laboratory of Civil Engineering (LNEC), Lisbon; 1993 (in Portuguese).
34. EN 12390–6 Testing hardened concrete – Part 6: tensile splitting strength of test specimens. European Committee for Standardization (CEN), Brussels; 2009.
35. EN 12390–3 Testing hardened concrete – Part 3: compressive strength of test specimens. European Committee for Standardization (CEN), Brussels; 2001.
36. Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: protection systems with insulation of the anchorage zones10.1016/j.compositesb.2011.09.002 ↗
37. SIKA Portugal, S.A. Icosit KC 220 N – High bearing fluid epoxy mortar. Product data sheet; 2009 (in Portuguese).
38. SIKA Deutschland GmbH. Icosit KC 220/60 TX – 2-pack Epoxy binder. Product data sheet; 2009.
39. Timoshenko · 1974
40. Gonilha JA, Aquino A, Correia JR, Branco FA. Experimental evaluation of the GFRP/ECC connection – shear connection tests: phase 1. Project report A5.T4.IST.1. Instituto Superior Técnico, Technical University of Lisbon; 2010.
41. EN 1994-1-1. Eurocode 4: Design of composite steel and concrete structures - Part 1–1: General rules and rules for buildings. European Committee for Standardization (CEN), Brussels; 2004.
42. Li Z, Schafer BW. Buckling analysis of cold-formed steel members with general boundary conditions using CUFSM: conventional and constrained finite strip methods. In: Proceedings of the 20th international. Specialty conference on cold-formed steel structures. St. Louis, MO; 2010.