journal article·2015-12

Composite plate stiffness multicriteria optimization using lamination parameters

Thiago Assis Dutra, Sérgio Frascino Müller de Almeida

Publisher page

Abstract

Abstract Lightweight structures are currently largely applied in several areas and their use is growing every day. In this context, composite materials are key parts to achieve design requirements due to their high potential for optimization. The lamination parameters play an important role as design variables in composite laminates layer optimization. This is due to the fact that the stiffness matrix linear with respect to them. This work aims at presenting an optimization method based upon a quadratic metamodel used to estimate the objective function. An analytical formulation to obtain the derivatives of the objective functions with respect to the lamination parameters is presented. The allowable region of the lamination parameters is also analyzed and laminate databases are applied in order to avoid problems of defining the boundaries of the allowable region. A composite plate subjected combined bending and torsion loads is optimized and the results are presented and discussed in terms of practical design of aeronautical structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Topology Optimization in Engineering · Composite Structure Analysis and Optimization · Advanced Multi-Objective Optimization Algorithms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Invariant properties of composite materials
2. Tsai · 1980 · vol. 1
3. Layup optimization against buckling of shear panels10.1007/BF01743281 ↗
4. Stiffness optimization of orthotropic laminated composites using lamination parameters10.2514/3.59931 ↗
5. Stiffness design method of symmetric laminates using lamination parameters10.2514/3.11304 ↗
6. Optimum design of laminated composite plates using lamination parameters10.2514/3.49033 ↗
7. Lamination parameters for Reissner–Mindlin plates10.2514/3.12296 ↗
8. A general approach forcing convexity of ply angle optimization in composite laminates10.1007/BF01202831 ↗
9. Feasible region in general design space of lamination parameters for laminated composites10.2514/2.1683 ↗
10. Single-level composite wing optimization based on flexural lamination parameters10.1007/s00158-003-0315-6 ↗
11. Optimum design of composite plate wings for aeroelastic characteristics using lamination parameters10.1016/j.compstruc.2006.08.051 ↗
12. On feasible regions of lamination parameters for lay-up optimisation of laminated composites10.1098/rspa.2008.0380 ↗
13. Ferreira, APCS, Bonet G, Almeida SFM. Composite laminate multicriteria membrane stiffiness matrix components optimization using lamination parameters. In: 5th International conference on composite materials, 2011, Porto, Portugal.
14. Ferreira, CAE, Dutra T, de Almeida SFM. Optimization of static properties of fibre metal laminates based on lamination parameters. In: 2nd Brazilian conference on composite materials, São José dos Campos, São Paulo, Brazil, 2014.
15. Dutra TA, Ferreira CAE, de Almeida SFM. Sensitivity analysis of the transverse shear on composite plates under bending load. In: 2nd Brazilian conference on composite materials, São José dos Campos, São Paulo, Brazil, 2014.
16. Optimization of composite plates subjected to buckling and small mass impact using lamination parameters10.1016/j.compstruct.2014.09.043 ↗
17. Mostafa MA, Kassapoglou C, Gürdal Z. Formulation of composite laminate robustness constraint in lamination parameters space. In: 50th AIAA/ASME/ASCE/AHS/ ASC structures, structural dynamics, and materials conference, 2009.
18. Niu · 1992
19. Ochoa · 1992
20. Daniel · 2006