Bond characteristics of sprayed FRP composites bonded to concrete substrate considering various concrete surface conditions
Source abstract
Abstract
Abstract This paper presents the results of pull-off bond tests carried out to investigate the bond characteristics of the sprayed FRP composites bonded to concrete substrate with various surface conditions. It was intended to evaluate the effect of key parameters considering field application conditions on the bond behavior and performance between the sprayed FRP layer and concrete surfaces. Key parameters used in this study consisted of the surface treatment method, saturation condition and the use of the primer coating. The results showed that the key parameters had significant effect on the bond behavior and performance of the sprayed FRP system bonded to concrete substrates being observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. A review of the present and future utilization of FRP composites in the civil infrastructure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
2. Bond and force transfer of composite material plates bonded to concrete
3. Study on FRP-concrete interface bond performance
4. Karbhari · 2007
5. Sprayed fibre-reinforced polymers for repairs10.1139/l00-027 ↗
6. Young SC, Harries KA. An investigation of properties and procedure of spray layed-up fiber reinforced polymer materials for concrete rehabilitation. University of South Caronia. Report No. ST00-03; 2000. p. 1–57.
7. Structural repair and strengthening of damaged RC beams with sprayed FRP10.1016/S0263-8223(03)00156-9 ↗
8. Effectiveness of anchorage in concrete beams retrofitted with sprayed fiber-reinforced polymers10.1177/0731684404038626 ↗
9. Effectiveness of retrofitting damaged concrete beams with sprayed fiber-reinforced polymer coating10.1177/0731684407087687 ↗
10. Boyd AJ. Rehabilitation of reinforced concrete beams with sprayed glass fiber reinforced polymers, Ph.D. Philosophy, The University of British Columbia; 2000.
11. Environmental effects on the short-term bond of carbon fiber-reinforced polymer (CFRP) composites10.1061/(ASCE)1090-0268(2003)7:1(58) ↗
12. Bond strength of carbon fiber sheet on concrete substrate processed by vacuum assisted resin transfer molding10.1163/156855108X345199 ↗
13. Maerz N, Galecki G, Nanni A. Experimental nondestructive testing of FRP materials, installation, and performance, Dallas county bridge, Missouri, USA. In: 16th World conference on nondestructive testing. The e-J Nondestr Test, vol. 9(11); 2004.
14. Bond enhancement for FRP pile repair in tidal waters10.1061/(ASCE)1090-0268(2008)12:3(334) ↗
15. Behavior of FRP-confined concrete after high temperature exposure10.1016/j.conbuildmat.2010.06.103 ↗
16. Ha SK. Advanced spray-up retrofitting of concrete: improved lay-up process and tensile/bond characteristics of spray-up FRP in concrete. Ph.D. Thesis, Korea Advanced Institute of Science and Technology (KAIST); 2012.
17. Tensile bond testing of concrete repairs10.1007/BF02473259 ↗
18. Shear strengthening of small scale concrete beams with carbon fibre reinforced plastic sheets
19. Improving concrete bond in repair bridge decks
20. Cleland DJ, Naderi M, Lond AE. Bond strength of patch repair mortars for concrete. In: Proceedings of the RILEM international symposium on adhesion between polymer and concrete, aix-en-provence. London: Chapman & Hall; 1986. p. 225–44.10.1007/978-1-4899-3454-3_26 ↗
21. Correlation between concrete-to-concrete bond strength and the roughness of the substrate surface10.1016/j.conbuildmat.2006.05.044 ↗
22. Microstructure and morphology of amine-cured epoxy coatings and their changes with outdoor exposures: an AFM study
23. Synthesis, characterization, and water sorption properties of new aromatic polyamides containing benzimidazole and ethylene oxide moieties10.1002/pola.20486 ↗
24. ASTM C 192. Standard practice for making and curing concrete test specimens in the laboratory. ASTM international; 2007.
25. ASTM C 39. Standard test method for compressive strength of cylindrical concrete specimens. ASTM international; 2004.
26. ASTM D 4541. Standard test method for pull-off strength of coatings using portable adhesion testers. ASTM international; 2009.
27. ASTM D 7234. Standard test method for pull-off adhesion strength of coatings on concrete using portable pull-off adhesion testers. ASTM international; 2005.
28. ASTM D 7522. Standard test method for pull-off strength for FRP bonded to concrete substrate. ASTM International; 2009.
29. JIS K 5600. Testing methods for paints. Japanese standards association; 2008.
30. EN 1542. Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off. British Standards Institution; 1999.