journal article·2013-05

Fatigue crack growth in nano-composites

R. Jones, S. Pitt, D. Hui, A. Brunner

Publisher page

Abstract

Abstract This paper discusses the potential of a variant of the Hartman–Schijve equation to represent fatigue crack growth in a range of nano-composites. It is found that when expressed in this form the exponent of this variant is approximately 2 and, as such, is considerably lower than the exponent in “Paris like” power law representations for delamination growth in composites. As such we see that, in these examples, the present variant of the Hartman–Schijve representation of delamination growth in nano-composites is similar to that seen for crack growth in metals, delamination growth in composites and the environmental degradation of adhesive bonds. This suggests that the present formulation may be useful for the damage tolerant assessment of small naturally occurring defects in nano-composite structures and for the ranking of nano-composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. The effects of environment and load frequency on the crack propagation law for macro fatigue crack growth in aluminum alloys10.1016/0013-7944(70)90003-2 ↗
2. Fatigue crack growth in a fillet welded joint10.1016/0013-7944(83)90130-3 ↗
3. Analytical prediction of short to long fatigue crack growth rate using small- and large-scale yielding fracture mechanics10.1016/S0142-1123(03)00126-9 ↗
4. An analysis of the growth of short fatigue cracks10.1016/0013-7944(91)90151-P ↗
5. Prediction of the behaviour of small fatigue cracks10.1016/j.msea.2006.09.084 ↗
6. Study of the fatigue lifetimes and crack propagation behaviour of a high speed steel as a function of the R value10.1111/j.1460-2695.2010.01441.x ↗
7. Application of the Hartman–Schijve equation to represent modes I and II fatigue delamination growth in composites10.1016/j.compstruct.2011.11.030 ↗
8. Fatigue crack growth in a diverse range of materials10.1016/j.ijfatigue.2012.01.004 ↗
9. Elber W. The significance of fatigue crack closure. Damage tolerance of aircraft structures. ASTM STP-486. 1971, p. 230–42.10.1520/STP26680S ↗
10. Characterization of the durability of adhesive bonds10.1111/j.1460-2695.2012.01688.x ↗
11. Chalkley · 1998
12. Design of an all boron epoxy doubler for the F-111C wing pivot fitting: structural aspects10.1016/0263-8223(89)90030-5 ↗
13. Raizenne D. Case history: CF116 upper wing skin fatigue enhancement boron doubler. In: Baker A, Rose LRF, Jones R, editors. Chapter, Advances in the bonded composite repair of metallic aircraft structure. Elsevier Applied Science Publishers; 2002. ISBN 0-08-042699-9.10.1016/B978-008042699-0/50038-3 ↗
14. An experimental investigation into the effect of impact damage on the compressive strength of step lap joints10.1016/0013-7944(89)90165-3 ↗
15. Wanhill RJH. Characteristic stress intensity factor correlations of fatigue crack growth in high strength alloys: reviews and completion of NLR investigations 1985–1990, NLR-TP-2009-256, September 2009.
16. The lead crack fatigue lifting framework10.1016/j.ijfatigue.2010.09.009 ↗
17. Schijve J. Fatigue life until small cracks in aircraft structures. Durability and damage tolerance. Advanced structural integrity methods for airframe durability and damage tolerance. In: Harris CE, editor. Proceedings of FAA/NASA international symposium, Hampton, 1994. NASA Conference Publication 3274; 1994. p. 665–81.
18. A numerical and experimental investigation of delamination behaviour in the DCB specimen10.1016/S0266-3538(99)00113-X ↗
19. O’Brien · 1985
20. Damage tolerance of graphite epoxy structures10.1016/0263-8223(85)90018-2 ↗
21. Characterization of pure and mixed mode fracture in composite laminates10.1016/0167-8442(87)90025-5 ↗
22. Martin RH, Murri GB. Characterization of mode I and mode II delamination growth and thresholds in graphite/peek composites. NASA Technical Memorandum 100577, AVSCOM Technical Memorandum 88-B-011, April 1988.
23. Khan R, Rans CD, Benedictus R. Effect of stress ratio on delamination growth behavior in unidirectional carbon/epoxy under mode I fatigue loading. In: Proceedings ICCM. Edinburgh; 2009.
24. Development of a standardized procedure for the characterization of interlaminar delamination propagation in advanced composites under fatigue mode I loading conditions10.1016/j.engfracmech.2009.07.014 ↗
25. Mall S, Yun KT, Kochhar NK. Characterization of matrix toughness effect on cyclic delamination growth in graphite fiber composites. In: Presented at the 2nd ASTM symposium on composite materials: fatigue and fracture. Cincinnati, Ohio, April 1987.
26. Prel YJ, Davies P, Benzeggagh ML, de Charentenay F. Mode I and Mode II delamination of thermosetting and thermoplastic composites. In: Presented at the 2nd ASTM symposium on composite materials: fatigue and fracture. Cincinnati, Ohio, April 1987.
27. Experimental aspects of Mode I and Mode II fracture toughness testing of fibre-reinforced polymer–matrix composites10.1016/S0045-7825(99)00257-1 ↗
28. Johnson RW, McCarty JE, Wilson DR. Damage tolerance testing for the Boeing 737 graphite-epoxy horizontal stabilizer. In: Proceedings of 5th DoD/NASA conference on fibrous composites in structure design. NADC, 81096-60, New Orleans, January 1981.10.2514/6.1982-745 ↗
29. Fawcett J, Trostle S, Ward, 777 empennage certification approach. In: Proceedings 11th international conference on composite materials (ICCM-11). Australia, July 14–18 1997.
30. Crack growth from physically small flaws10.1016/j.ijfatigue.2007.01.031 ↗
31. The fracture and fatigue behaviour of nano-modified epoxy polymers10.1007/s10853-007-1768-6 ↗
32. Hsieh TH, Kinloch AJ, Taylor AC, et al. The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer. J Mater Sci 2011;46:7525–35, ISSN:0022–2461.10.1007/s10853-011-5724-0 ↗
33. Suppression of fatigue crack growth in carbon nanotube composites10.1063/1.2809457 ↗
34. Fracture and fatigue in graphene nanocomposites10.1002/smll.200801910 ↗
35. Fatigue and fracture toughness of epoxy nano-composites10.1007/s11837-010-0032-8 ↗
36. The effect of carbon nanotube dimensions and dispersion on the fatigue behavior of epoxy nano-composites10.1088/0957-4484/19/28/285709 ↗
37. Fatigue of particle and whisker-reinforced metal matrix composites10.1016/S0079-6425(00)00006-2 ↗
38. On the behavior of small fatigue cracks in commercial aluminum-lithium alloys10.1016/0013-7944(88)90105-1 ↗