Flexural stiffness of thick walled composite tubes
Source abstract
Abstract
Composite tubes have been used in many applications such as pipes, robot arms, drive shafts, electrical conduits, printing rollers, tube structures for sports equipment, rocket structures, satellite truss structures, landing gears for helicopters, and structural building members etc. For thin wall tubes made of isotropic materials, the flexural stiffness is usually determined by using strength of material approach with the expression EI, where E is the material modulus and I the cross section inertia. For composite tubes where many layers with different orientations are involved, the situation is more complex. Comparison of the results obtained using strength of materials equation and equation based on elasticity shows a large difference. In order to be sure of the validity of the results, experimental validation is necessary. This paper presents the experimental work done on the determination of the flexural stiffness of thick composite tubes. Thick composite tubes were manufactured using an automated fiber placement machine. A special test set up was developed to subject the tubes to pure bending. Both strain gages and Digital Image Correlation were used to determine the strains, and subsequently the flexural stiffness. Experimental flexural stiffnesses of the tubes were determined. Results are compared with those calculated using the different equations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Structural Load-Bearing Analysis · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Lekhnitskii · 1981
2. Analytical solution for bending of coaxial orthotropic cylinders10.1061/(ASCE)0733-9399(1994)120:12(2556) ↗
3. Laminated composite tubes under extension, torsion, bending, shearing and pressuring: a state space approach10.1016/S0020-7683(01)00170-6 ↗
4. Bending behavior of filament-wound fiber-reinforced sandwich pipes10.1016/S0263-8223(01)00181-7 ↗
5. Free vibration of anisotropic composite thin-walled beams of closed cross-section contour
6. Analysis of thick hollow composite beams under general loadings10.1016/0263-8223(95)00146-8 ↗
7. On bending stiffness of composite tubes
8. A simple and effective pipe elbow element-linear analysis10.1115/1.3153645 ↗
9. An enhanced pipe elbow element application in plastic limit analysis of pipe structures10.1002/(SICI)1097-0207(19990930)46:3<409::AID-NME682>3.0.CO;2-N ↗
10. Qi X, Jiang S. Design and analysis of a filament wound composite tube under general loadings with assistance of computer. In: 2nd international conference on education technology and computer (ICETC); 2010.
11. Xu D, Derisi B, Hoa SV, Hojjati M, Fews R. Stress distributions of thermoplastic composite tubes subjected to four-point loading. In: The 1st joint Canadian–American international conference, Delaware, USA; 2009.
12. Similitude study on bending stiffness behavior of composite tubes10.1177/0021998311431642 ↗
13. Mechanical behavior of carbon/PEEK thermoplastic composite tube under bending load10.1177/0892705710367978 ↗
14. Composite tube exhibiting large deformation under bending10.1177/0021998310365173 ↗
15. A limit based approach to the stress analysis of cylindrically orthotropic composite cylinders (0/90) subjected to pure bending10.1016/j.compstruct.2012.02.030 ↗
16. A method to analyze the pure bending of tubes of cylindrically anisotropic layers with arbitrary angles including 0° and 90°10.1016/j.compstruct.2013.10.038 ↗
17. Recent research advances on the dynamic analysis of composite shells: 2000–200910.1016/j.compstruct.2010.05.014 ↗
18. Hyer · 2009
19. Saga P. Experimental study of laminated composite tubes under bending [Master thesis]. University of Texas; 2007.
20. Derisi B. evelopment of thermoplastic composite tubes for large deformation [Ph.D thesis]. Montreal, Quebec, Canada: Concordia University; 2008.
21. Fuchs JP, Hyer MW, Starnes Jr., JH. Numerical and experimental investigation of the bending response of thin walled composite tubes. NASA-CR-195370, Blacksburg, Virginia; 1993.
22. Shadmehri F. Buckling of laminated compoite conical shells: theory and experiment [Ph.D thesis]. Montreal, Quebec, Canada: Concordia University; 2012.
23. TenCate Advanced Composites. enCate cetex thermoplastic advanced composites technical data; 2012.
24. Design and testing of in situ consolidated thick high performance thermoplastics
25. El-Geuchy Ahmad MI. Bending behavior of thick walled composite tubes [Ph.D thesis]. Concordia University; 2013.