Intermediate crack-induced debonding in CFRP-retrofitted notched steel beams at different service temperatures: Experimental test and finite element modeling
Source abstract
Abstract
202211 bcch ; Accepted Manuscript ; RGC ; Published ; Green (AAM)
The source flagged this abstract for review. Check formulas and completeness against the original publication.
Source: openaire · Quality: needs review · Source record ↗
Source flags: short_text
Source flags: short_text
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Mechanical Behavior of Composites · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. CFRP repair of steel beams with various initial crack configurations10.1061/(ASCE)CC.1943-5614.0000223 ↗
2. Theoretical and experimental study on notched steel beams strengthened with CFRP plate10.1016/j.compstruct.2015.10.024 ↗
3. Strengthening of steel structures with fiber-reinforced polymer composites10.1016/j.jcsr.2012.06.011 ↗
4. Experimental study on steel plates with and without notches strengthened by CFRP sheets10.1080/01694243.2019.1620671 ↗
5. Fatigue tests on edge cracked four-point bend steel specimens repaired by CFRP10.1016/j.compstruct.2019.03.055 ↗
6. Fatigue strengthening of cracked steel beams with different configurations and materials10.1061/(ASCE)CC.1943-5614.0000750 ↗
7. Fatigue retrofitting of cracked steel beams with CFRP laminates10.1016/j.compstruct.2018.02.090 ↗
8. Experimental study on the fatigue behaviour of cracked steel beams repaired with CFRP plates10.1016/j.engfracmech.2015.04.009 ↗
9. Fatigue behavior of notched steel beams strengthened by a prestressed CFRP plate subjected to wetting/drying cycles10.1016/j.compositesb.2021.109491 ↗
10. Bond behaviour of CFRP/steel strap joints exposed to overloading fatigue and wetting/drying cycles10.1016/j.engstruct.2018.05.112 ↗
11. Numerical study on notched steel beams strengthened by CFRP plates10.1016/j.conbuildmat.2017.12.110 ↗
12. Effects of adhesive property and thickness on the bond performance between carbon fiber reinforced polymer laminate and steel10.1016/j.tws.2020.107176 ↗
13. Bond characteristics of CFRP-to-steel joints10.1016/j.jcsr.2017.08.001 ↗
14. Adhesive rheology impact on wet lay-up CFRP/steel joints’ behaviour under infrastructural subzero exposures10.1016/j.compositesb.2012.11.012 ↗
15. A temperature-dependent bond-slip model for CFRP-to-steel joints10.1016/j.compstruct.2019.03.019 ↗
16. Al-Shawaf · 2010
17. Experimental investigation of bond between high-modulus CFRP and steel at moderately elevated temperatures10.1061/(ASCE)CC.1943-5614.0000702 ↗
18. Bond behavior of CFRP-to-steel bonded joints at mild temperatures: experimental study10.1061/(ASCE)CC.1943-5614.0001073 ↗
19. Effect of elevated temperature on bond behaviour of high modulus CFRP/steel double-strap joints10.1080/13287982.2009.11465033 ↗
20. Mechanical characterization of CFRP/steel bond cured and tested at elevated temperature10.1016/j.compstruct.2018.09.048 ↗
21. Effects of elevated temperatures on mechanical behavior of epoxy adhesives and CFRP-steel hybrid joints10.1016/j.compstruct.2019.111789 ↗
22. Failure of CFRP-to-steel double strap joint bonded using carbon nanotubes modified epoxy adhesive at moderately elevated temperatures10.1016/j.compositesb.2016.03.042 ↗
23. Mechanical characterization of steel/CFRP double strap joints at elevated temperatures10.1016/j.compstruct.2011.01.010 ↗
24. Energy-based analytical formulation for the prediction of end debonding in strengthened steel beams10.1016/j.compstruct.2016.05.084 ↗
25. Intermediate crack induced debonding in steel beams reinforced with CFRP plates under fatigue loading10.1016/j.engstruct.2018.04.002 ↗
26. A closed-form solution of the interfacial stresses and strains in steel beams strengthened with externally bonded plates using ductile adhesives10.1016/j.engstruct.2017.10.054 ↗
27. Effect of warm temperatures on externally bonded FRP strengthening10.1061/(ASCE)CC.1943-5614.0000260 ↗
28. Fernando · 2010
29. Debonding of CFRP-to-steel joints with CFRP delamination10.1016/j.compstruct.2016.05.100 ↗
30. Experimental study on CFRP-to-steel bonded interfaces10.1016/j.compositesb.2012.01.024 ↗
31. A new bond-slip model for adhesive in CFRP–steel composite systems10.1016/j.engstruct.2011.08.037 ↗
32. Behavior of CFRP laminates bonded to a steel substrate using a ductile adhesive10.1061/(ASCE)CC.1943-5614.0000439 ↗
33. Stress analysis of steel beams reinforced with a bonded CFRP plate10.1016/j.compstruct.2003.10.017 ↗
34. A nonlinear analytical model to predict the full-range debonding process of FRP-to-parent material interfaces free of any mechanical anchorage devices10.1016/j.compstruct.2015.11.035 ↗
35. Debonding analysis of FRP-to-concrete interfaces between two adjacent cracks in plated beams under temperature variations10.1016/j.engfracmech.2022.108307 ↗
36. The bond behaviour of CFRP-to-steel bonded joints with varying bond properties at elevated temperatures10.1016/j.engstruct.2018.10.044 ↗
37. Development of bond strength model for CFRP-to-concrete joints at high temperatures10.1016/j.compositesb.2016.03.088 ↗
38. Interfacial behavior and debonding failures of full-scale CFRP-strengthened H-section steel beams10.1016/j.compstruct.2018.06.045 ↗
39. Numerical study on notched steel plate with center hole strengthened by CFRP10.1080/01694243.2017.1400797 ↗
40. Finite element modelling of debonding failures in steel beams flexurally strengthened with CFRP laminates10.1016/j.engstruct.2015.01.003 ↗
41. Bond-slip model for FRP laminates externally bonded to concrete at elevated temperature10.1061/(ASCE)CC.1943-5614.0000337 ↗
42. Glass transition evaluation of commercially available epoxy resins used for civil engineering applications10.1016/j.compositesb.2015.03.053 ↗
43. The influence of temperature variations on adhesively bonded structures: A non-linear theoretical perspective10.1016/j.ijnonlinmec.2019.03.001 ↗
44. Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art10.1016/j.compositesb.2015.07.014 ↗
45. Mechanical behavior of large-rupture-strain (LRS) polyethylene naphthalene fiber bundles at different strain rates and temperatures10.1016/j.conbuildmat.2021.123786 ↗
46. Effect of temperature variation on the full-range behavior of FRP-to-Concrete bonded joints10.1061/(ASCE)CC.1943-5614.0000296 ↗
47. Analysis of Mode II debonding behavior of fiber-reinforced polymer-to-substrate bonded joints subjected to combined thermal and mechanical loading10.1016/j.engfracmech.2015.02.002 ↗
48. Effects of temperature variation on intermediate crack-induced debonding and stress intensity factor in FRP-retrofitted cracked steel beams: An analytical study10.1016/j.compstruct.2021.114776 ↗
49. Effect of temperature variation on the plate-end debonding of FRP-strengthened beams: A theoretical study10.1177/13694332211046342 ↗
50. Effect of temperature variation on the plate-end debonding of FRP-strengthened steel beams: coupled mixed-mode cohesive zone modeling10.1016/j.engfracmech.2022.108583 ↗
51. Full-range behavior of FRP-to-concrete bonded joints subjected to combined effects of loading and temperature variation10.1016/j.engfracmech.2021.107928 ↗
52. Experimental characterization of the bond between externally bonded reinforcement (EBR) CFRP strips and concrete at elevated temperatures10.1016/j.cemconcomp.2015.02.008 ↗
53. ASTM A370-17. Standard test methods and definitions for mechanical testing of steel products. West Conshohocken, Philadelphia (PA): ASTM International, 2017.
54. ASTM D3039-14. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken, Philadelphia (PA): ASTM International, 2017.
55. ISO-11359. · 1999
56. ASTM-D7028. Standard test method for glass transition temperature (DMA Tg) of polymer matrix composites by dynamic mechanical analysis (DMA). West Conshohocken, Philadelphia (PA): ASTM International, 2017.
57. Temperature-dependent elastic moduli of epoxies measured by DMA and their correlations to mechanical testing data10.1016/j.polymertesting.2007.05.003 ↗
58. Preparation and characterization of steel surfaces for adhesive bonding10.1061/(ASCE)CC.1943-5614.0000387 ↗
59. Fractal analysis of surfaces roughened by grit blasting10.1163/156856100742096 ↗
60. Behaviour under static loading of metallic beams reinforced with a bonded CFRP plate10.1016/j.compstruct.2005.09.004 ↗
61. Fatigue crack growth in CFRP-strengthened steel plates10.1016/j.compositesb.2014.11.036 ↗
62. Effect of load distribution on IC debonding in FRP-strengthened RC beams: Full-scale experiments10.1016/j.compstruct.2018.01.026 ↗
63. Experimental study on the bond behaviour of a transversely compressed mechanical anchorage system for externally bonded reinforcement10.1016/j.compstruct.2018.05.084 ↗
64. Alexander JGS, Cheng JJR. Shear strengthening of small scale concrete beams with carbon fibre reinforced plastic sheets. Proceedings of the 1st Structural Speciality Conference, Edmonton, Alberta, Canada, 1996; pp. 167–77.
65. Numerical modelling of the effects of elevated service temperatures on the debonding process of FRP-to-concrete bonded joints10.1016/j.compositesb.2014.10.041 ↗
66. Interfacial stresses in plated beams10.1016/S0141-0296(00)00090-0 ↗
67. Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam10.1016/j.ijsolstr.2006.01.013 ↗
68. Coupled mixed-mode cohesive zone modeling of interfacial debonding in simply supported plated beams10.1016/j.ijsolstr.2013.03.035 ↗
69. Study on the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests10.1016/j.conbuildmat.2020.120029 ↗
70. Finite element modeling of insulated FRP-strengthened RC beams exposed to fire10.1061/(ASCE)CC.1943-5614.0000509 ↗
71. Fire resistance design of un-protected FRP-strengthened RC beams10.1617/s11527-016-0865-x ↗
72. Simple method for predicting temperatures in insulated, FRP-strengthened RC members exposed to a standard fire10.1061/(ASCE)CC.1943-5614.0000566 ↗
73. Three-level fire resistance design of FRP-strengthened RC beams10.1061/(ASCE)CC.1943-5614.0000840 ↗
74. Tensile strength of Q345 steel with random pitting corrosion based on numerical analysis10.1016/j.tws.2019.106579 ↗
75. Experimental study on generalized constitutive model of hull structural plate with multi-parameter pitting corrosion10.1016/j.oceaneng.2018.10.038 ↗
76. Calculation of the strain hardening behaviour of steel structures based on mill tests10.1016/j.jcsr.2004.08.001 ↗
77. Finite element analysis of plastic collapse and crack behavior of steel pressure vessels and piping using XFEM10.1007/s11668-012-9623-8 ↗
78. Crack propagation and burst pressure of longitudinally cracked pipelines using extended finite element method10.1016/j.ijpvp.2020.104115 ↗
79. Prediction of crack initiation and propagation in X70 pipeline steels10.1016/j.engfracmech.2016.10.006 ↗
80. Estimation of the CTOD-crack growth curves in SENT specimens using the extended finite element method10.1016/j.ijpvp.2018.11.008 ↗
81. Simulation of crack propagation in API 5L X52 pressurized pipes using XFEM-based cohesive segment approach10.1061/(ASCE)PS.1949-1204.0000444 ↗
82. Development of a tensile strain capacity predictive model for API X42 welded vintage pipelines10.1115/1.4047561 ↗
83. Crack initiation and propagation in ductile specimens with notches: experimental and numerical study10.1007/s00707-015-1425-0 ↗
84. Shahzamanian MM, lin M, Kainat M, Yoosef-Ghodsi N, Adeeb S. Systematic literature review of the application of extended finite element method in failure prediction of pipelines. J Pipeline Sci Eng 2021;1(2):241–51.10.1016/j.jpse.2021.02.003 ↗
85. Sub-zero temperature mechanical properties of cold-rolled steel sheets10.1016/j.tws.2020.106842 ↗