Enhanced mechanical properties and energy absorption of lattice metamaterials inspired by crystal imperfections
Source abstract
Abstract
The inspiration of crystal lattice provides a straightforward but efficient tool to generate lightweight lattice metamaterials . However, crystals in nature are imperfect. Here, inspired by the point defects of crystal microstructure , we propose a class of modified body-centered cubic lattice metamaterials featuring adjustable central nodes with enhanced mechanical properties and energy absorption. The effects of node offset on the compressive behaviors of lattice metamaterials are evaluated using compression tests and finite element methods . The modified lattice metamaterials exhibit a distinct two-step deformation, gradually enhancing the load-bearing capability during the compression process . A novel auxetic behavior is achieved by increasing the distance of node offset. Notably, the elastic modulus , yield strength, and specific energy absorption of the lattice metamaterials are improved by 41.5–154.1 %, 40.2–110.8 %, and 96.2–245.2 %, respectively. The strengthening mechanisms of the point defect on the mesoscale lattice metamaterials are derived from the combination of negative Poisson’s ratio and mixed bending- and stretching-dominated deformation behaviors . Additionally, the modified lattice metamaterials demonstrate an efficient energy dissipation capability with a high energy dissipation rate of approximately 0.7 up to five cycles. Overall, this work demonstrates the potential of mimicking crystal defects to simultaneously enhance mechanical properties and energy absorption of mesoscale lattice metamaterials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Elastically isotropic truss-plate-hybrid hierarchical microlattices with enhanced modulus and strength
2. Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces10.1016/j.ijmecsci.2019.105262 ↗
3. Additively manufactured deformation-recoverable and broadband sound-absorbing microlattice inspired by the concept of traditional perforated panels10.1002/adma.202104552 ↗
4. A continuum model for the tensegrity Maxwell chain10.3934/nhm.2024026 ↗
5. A Weierstrass approach to the analysis of rarefaction solitary waves in tensegrity mass-spring systems10.2478/caim-2024-0008 ↗
6. Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components10.1016/j.cja.2020.08.015 ↗
7. Generalized yield surface for sheet-based triply periodic minimal surface lattices10.1016/j.ijmecsci.2023.108370 ↗
8. Gibson · 1997
9. Programmable, active lattice structures: Unifying stretch-dominated and bending-dominated topologies10.1016/j.eml.2019.100461 ↗
10. Quasi-static and dynamic compression of additively manufactured functionally graded lattices: Experiments and simulations10.1016/j.engstruct.2023.115909 ↗
11. A study of multi-stage energy absorption characteristics of hybrid sheet TPMS lattices10.1016/j.tws.2023.110989 ↗
12. Evaluation of mechanical properties of Ti–6Al–4V BCC lattice structure with different density gradient variations prepared by L-PBF10.1016/j.msea.2023.144986 ↗
13. Stability of tensegrity-inspired structures fabricated through additive manufacturing10.1016/j.compstruct.2024.118377 ↗
14. Optimization of graded filleted lattice structures subject to yield and buckling constraints10.1016/j.matdes.2021.109746 ↗
15. Anisotropy and deformation of triply periodic minimal surface based lattices with skew transformation10.1016/j.matdes.2023.111595 ↗
16. Design, mechanical properties, and optimization of BCC lattice structures with taper struts10.1016/j.compstruct.2022.115830 ↗
17. Lessons from nature: 3D printed bio-inspired porous structures for impact energy absorption – A review
18. Breaking the tradeoffs between different mechanical properties in bioinspired hierarchical lattice metamaterials
19. Multi‐level bioinspired microlattice with broadband sound‐absorption capabilities and deformation‐tolerant compressive response
20. A damage-tolerant, dual-scale, single-crystalline microlattice in the knobby starfish, Protoreaster nodosus10.1126/science.abj9472 ↗
21. Geometry effect on mechanical properties and elastic isotropy optimization of bamboo-inspired lattice structures10.1007/978-3-031-04721-3 ↗
22. Crushing analysis and optimization for bio-inspired hierarchical 3D cellular structure10.1016/j.compstruct.2022.115333 ↗
23. Dynamic mechanical behavior of additively manufactured bio-inspired metallic lattice structure subjected to high strain rate impact loading10.1016/j.ijimpeng.2023.104752 ↗
24. Horsetail-inspired lattice structures for bone scaffold applications
25. Bioinspired hierarchical diamond triply periodic minimal surface lattices with high energy absorption and damage tolerance
26. Compressive performance and fracture mechanism of bio-inspired heterogeneous glass sponge lattice structures manufactured by selective laser melting10.1016/j.matdes.2022.110396 ↗
27. Generative machine learning algorithm for lattice structures with superior mechanical properties10.1039/D1MH01792F ↗
28. On stiffness, strength, anisotropy, and buckling of 30 strut‐based lattices with cubic crystal structures10.1002/adem.202101379 ↗
29. Theoretical study of hydrogen impact on concentration of intrinsic point defects during Czochralski Si crystal growth10.1016/j.jcrysgro.2020.125971 ↗
30. Helium-driven element depletion and phase transformation in irradiated Ti3SiC2 at high temperature10.1016/j.jeurceramsoc.2023.01.048 ↗
31. Unraveling the characteristics of adsorption and diffusion of oxygen atoms on the surface of Zr and ZrO2 crystals with point defects from molecular dynamic simulations10.1016/j.jnucmat.2024.155143 ↗
32. Fowler · 2024 · 184
33. Enhanced energy-absorbing and sound-absorbing capability of functionally graded and helicoidal lattice structures with triply periodic minimal surfaces10.1007/s12613-023-2684-8 ↗
34. Effect of manufacturing defect on mechanical performance of plain weave carbon/epoxy composite based on 3D geometrical reconstruction10.1016/j.compstruct.2018.05.066 ↗
35. On the calculation of the equilibrium and stiffness of frames, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of
36. TPMS-based interpenetrating lattice structures: Design, mechanical properties and multiscale optimization10.1016/j.ijmecsci.2022.108092 ↗
37. Mechanical properties and energy absorption capabilities of functionally graded lattice structures: Experiments and simulations10.1016/j.ijmecsci.2020.105735 ↗
38. Investigation of functionally graded TPMS structures fabricated by additive manufacturing10.1016/j.matdes.2019.108021 ↗
39. Grid octet truss lattice materials for energy absorption10.1016/j.ijmecsci.2023.108616 ↗
40. Optimization design of a novel hybrid hierarchical cellular structure for crashworthiness10.1016/j.compstruct.2022.116335 ↗
41. Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams10.1016/j.ijmecsci.2018.03.027 ↗
42. A partially hollow BCC lattice structure with capsule-shaped cavities for enhancing load-bearing and energy absorption properties10.1016/j.engstruct.2024.117777 ↗
43. Mechanical design and energy absorption performances of novel plate-rod hybrid lattice structures10.1016/j.tws.2023.111349 ↗
44. A hybrid architectural metamaterial combing plate lattice and hollow-truss lattice with advanced mechanical performances