Closed cross-section dual-matrix composite hinge for deployable structures
Source abstract
Abstract
Abstract Dual-matrix composite structures with localized elastomer composite hinges have been proposed to enable packaging with much smaller fold radii than allowed by traditional resin-based fiber reinforced composites. Previous studies have been limited to proof-of-concept of folding capabilities and constitutive modeling of elastomer composites. A novel closed cross-section dual-matrix deployable hinge is studied here to develop the tools for studying the deployment of general dual-matrix structures. A set of tools for the analysis of deployment of this simple structure is developed: an analytic model that minimizes the strain energy in the folded configuration, experimental characterization, and finite element techniques using the LS-Dyna commercial software. The three models are used to predict the packaged shape and deployment moments, and are shown to be in good agreement amongst themselves. The analytic model is used to demonstrate control of the folded shape of the hinge using the stiffness of the elastomer composite. This behavior is verified using finite element models developed in the LS-Dyna commercial code. The simulations are used to predict the localized fold radius of the hinge within 3% and deployment moments within 5% by accounting for the microbuckled stiffness of the elastomer composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Analysis and Optimization · Advanced Materials and Mechanics · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The AstroMesh deployable reflector
2. Clark C, Kirk S. Off-the-shelf, deployable solar panels for CubeSats; 2012.http://mstl.atl.calpoly.edu/bklofas/Presentations/DevelopersWorkshop2012/ClarkSolarPanels.pdf.
3. Clampin M. JWST observatory status. In: Joint APS-SCCM/AIRAPT Conference; 2013.
4. Storable tubular extendible member: a unique machine element
5. Northrop Grumman, STEM Products and Programs; 2012.http://www.northropgrumman.com/BusinessVentures/AstroAerospace/Products/Documents/pageDocs/STEMHardwarePrograms.pdf.
6. Banik JA, Murphey TW. Performance validation of the triangular rollable and collapsible mast. In: 24th Annual AIAAUSU Conference on Small Satellites, Logan, Utah; 2010.
7. Aguirre M, Bureo A, Fuentes M, Rivacoba J. The Collapsible Tube Mast (CTM). In: Proceedings of the Second European Space Mechanisms and Tribology Sysmposium, 9–11 Oct. 1985, Meersburg, Germany, p. 75–81.
8. Sickinger C, Herbeck L, Strohlein T, Torrez-Torres J. Lightweight deployable booms: design, manufacture, verification, and smart materials application. In: 55th International Astronautical Congress of the International Astronautical Federation, the International Academy of Astronautics, and the International Institute of Space Law, Vancouver, Canada; 2004.https://doi.org/10.2514/6.IAC-04-I.4.10.10.2514/6.IAC-04-I.4.10 ↗
9. Datashvili L, Baier H, Wehrle E, Kuhn T, Hoffmann J. Large shell-membrane space reflectors. In: 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structual Dynamics, and Materials Conference, Orlando, Florida; 2010.https://doi.org/10.2514/6.2010-2504.10.2514/6.2010-2504 ↗
10. Peel LD, Mejia J, Narvaez B, Thompson K, Lingala M. Morphing wing using elastomeric composites as skins. J Mech Des 131.https://doi.org/10.1115/1.3159043.10.1115/1.3159043 ↗
11. Maqueda I, Pellegrino S, Mejia-Ariza J. Characterization of a High Strain Composite Material. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23–26 April 2012, Honolulu, Hawaii; 2012.10.2514/6.2012-1909 ↗
12. Manufacture of arbitrary cross-section composite honeycomb cores based on origami techniques10.1115/1.4026824 ↗
13. Deployable helical antennas for CubeSats10.1109/TAP.2016.2583058 ↗
14. Francis WH, Lake MS, Mayes JS. A review of classical fiber microbuckling analytical solutions for use with elastic memory composites. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1–4 May 2006, Newport, Rhode Island, Newport, Rhode Island.https://doi.org/10.2514/6.2006-1764.10.2514/6.2006-1764 ↗
15. Murphey TW, Meink T, Mikulas MM. Some micromechanics considerations of the folding of rigidizable composite materials. In: 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 16–19 April 2001, Seattle, WA.https://doi.org/10.2514/6.2001-1418.10.2514/6.2001-1418 ↗
16. Maqueda · 2014
17. Constitutive modeling of fiber composites with a soft hyperelastic matrix10.1016/j.ijsolstr.2011.11.006 ↗
18. Materials JC, JPS Databook, Tech. rep.; 2015.http://jpsglass.net/wp-content/uploads/2015/08/docslide.usjpsdatabook-55845c9747baf.pdf.
19. Henkel, Loctite 5055 Technical Data Sheet, Tech. rep.; 2010.http://www.loctite.com.au/aue/contentdata/2833505055EN.pdf.
20. Patz Materials and Technologies, Current PMT Prepreg Resin Systems; 2018.http://patzmandt.com/services/.
21. Daniel · 2005
22. Micromechanical models for bending behavior of woven composites10.2514/1.18010 ↗
23. Deployment dynamics of tape springs10.1098/rspa.1999.0347 ↗
24. Folding and deployment of thin shell structures
25. Configuration of a bent tape of curved cross-section10.1115/1.2893786 ↗
26. Stereo-rig design: stereo-angle selection – Part 410.1111/ext.12006 ↗
27. Leclerc C, Wilson L, Bessa M, Pellegrino S. Characterization of ultra-thin composite triangular rollable and collapsible booms. In: 4th AIAA Spacecraft Structures Conference, Grapevine, Texas. (AIAA 2017–0172); 2017.10.2514/6.2017-0172 ↗
28. Coiling dynamic analysis of thin-walled composite deployable boom10.1016/j.compstruct.2014.03.043 ↗
29. Deployment analysis of a self-deployable composite boom10.1016/j.compstruct.2008.08.012 ↗
30. Quasi-static folding and deployment of ultrathin composite tape-spring hinges10.2514/1.47321 ↗
31. Ubamanyu K, Mallikarachchi H. Simulation of dual-matrix composite boom. In: Proceedings of Annual Session of Society of Structural Engineers; 2016.
32. Sakovsky M, Pellegrino S, Mallikarachchi H. Folding and deployment of closed cross-section dual-matrix composite booms. In: 3rd AIAA Spacecraft Structures Conference, San Diego, CA. (AIAA 2016–0970); 2016.10.2514/6.2016-0970 ↗
33. Livermore Software Technology Corporation, LS-Dyna Keyword User’s Manual, Tech. rep.; 2012.