Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
Source abstract
Abstract
Biocomposites are promising materials for traditional composites replacement in specific applications due to their interesting properties and sustainability. Although the composite components are manufactured near net shape, some machining operations, commonly drilling, are commonly required prior to mechanical joining of the components. Tool geometry, mainly the point angle of the drill, strongly affects the performance of the drilling process of composites in terms of machining induced damage. The aim of this work is analyzing the influence of the point angle of the drill on the damage generated during drilling of 100% biodegradable composite, using both numerical and experimental approaches. The novelty of the work relies on the lack of studies of drilling 100% biodegradable composites. The influence of the point angle on the thrust forces and hence in the machining induced damage was demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. A review: natural fiber composites selection in view of mechanical, light weight, and economic properties10.1002/mame.201400089 ↗
2. Sisal fibre and its composites: a review of recent developments10.1016/S0266-3538(00)00101-9 ↗
3. State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world10.1016/j.jestch.2015.10.007 ↗
4. Implementation of eco-sustainable biocomposite materials reinforced by optimized agave fibers Procedia Struct
5. Yamini G, Shakeri A, Zohuriaan-mehr MJ, Kabiri K. Cyclocarbonated lignosulfonate as a bio-resourced reactive reinforcing agent for epoxy biocomposite : From natural waste to value-added bio- additive. J CO2 Util 2018;24:50–8. doi:10.1016/j.jcou.2017.12.007.10.1016/j.jcou.2017.12.007 ↗
6. Morphology and tensile properties of bast fibers extracted from cotton stalks10.1177/0040517513495949 ↗
7. Influence of fibre orientation, tool geometry and process parameters on surface quality in milling of CFRP10.1016/j.cirpj.2016.10.002 ↗
8. Experimental analysis of the influence of drill point angle and wear on the drilling of woven CFRPs10.3390/ma7064258 ↗
9. Influence of special tool geometry in drilling woven CFRPs Materials10.1016/j.proeng.2015.12.541 ↗
10. Experimental delamination analyses of CFRPs using different drill geometries10.1016/j.compositesb.2012.07.057 ↗
11. Tensile and fatigue behaviour of self-piercing rivets of CFRP to aluminium for automotive application. IOP Conf Ser
12. Wahab MA. Joining Composites With Adhesives 2016.
13. Rodríguez-Barrero S, Fernández-Larrinoa J, Azkona I, López De Lacalle LN, Polvorosa R. Enhanced Performance of Nanostructured Coatings for Drilling by Droplet Elimination. Mater Manuf Process 2016;31:593–602. doi:10.1080/10426914.2014.973582.10.1080/10426914.2014.973582 ↗
14. Mechanistic model for drills with double point-angle edges10.1007/s00170-007-1362-8 ↗
15. Study of drilling-induced defects for CFRP composites using new criteria10.1016/j.compstruct.2018.06.051 ↗
16. Drilling on fiber reinforced polymer/nanopolymer composite laminates : a review
17. Experimental analysis of drilling induced damage in aramid composites
18. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates10.1016/j.compscitech.2006.10.009 ↗
19. Effect of tool wear on delamination in drilling composite materials10.1016/j.ijmecsci.2007.01.001 ↗
20. Drilling tool geometry evaluation for reinforced composite laminates10.1016/j.compstruct.2009.10.035 ↗
21. Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP10.1016/j.compstruct.2018.07.007 ↗
22. Prediction of critical thrust force for tubular composite in drilling-induced delamination by numerical and experimental analysis10.1016/j.compstruct.2018.07.051 ↗
23. In fl uence of drilling on mode II delamination of E-glass/epoxy laminated composites10.1016/j.tafmec.2018.06.002 ↗
24. A novel approach to predict the delamination factor for dry and cryogenic drilling of CFRP10.1016/j.jmatprotec.2018.07.026 ↗
25. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments10.1016/S0263-8223(02)00257-X ↗
26. Delamination in drilling GFR-thermoset composites10.1016/S0263-8223(03)00180-6 ↗
27. Delamination analysis of carbon fiber reinforced plastic (CFRP) Composite plates by Thermo graphic technique10.1016/j.matpr.2015.07.101 ↗
28. Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills10.1016/j.ijmachtools.2005.01.009 ↗
29. Drilling of fiber reinforced plastics: a review10.1016/j.jmatprotec.2006.11.146 ↗
30. Hole making in natural fiber-reinforced polylactic acid laminates10.1177/0892705715575094 ↗
31. Experimental analysis of drilling induced damage in biocomposites
32. Influence of point angle on drill hole quality and machining forces when drilling CFRP10.1016/j.procir.2012.04.084 ↗
33. A review on finite element method for machining of composite materials10.1016/j.compstruct.2017.06.012 ↗
34. 3D finite element analysis of tensile notched strength of 2/2 twill weave fabric composites with drilled circular hole10.1016/S1359-8368(99)00078-5 ↗
35. A finite element model for the orthogonal cutting of fiber-reinforced composite materials10.1016/S0924-0136(01)00675-6 ↗
36. Orthogonal cutting of fiber-reinforced composites: A finite element analysis10.1016/S0020-7403(96)00061-6 ↗
37. Machining FEM model of long fiber composites for aeronautical components10.1016/j.compstruct.2009.09.021 ↗
38. Influence of tool geometry and numerical parameters when modeling orthogonal cutting of LFRP composites10.1016/j.compositesa.2011.04.023 ↗
39. Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs10.1016/j.compstruct.2017.10.061 ↗
40. Numerical simulation of the drilling process on carbon/epoxy composite laminates10.1016/j.compositesa.2005.08.013 ↗
41. Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study10.1016/j.matdes.2007.01.029 ↗
42. Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites10.1016/j.compstruct.2013.04.026 ↗
43. Drilling in carbon/epoxy composites: experimental investigations and finite element implementation10.1016/j.compositesa.2012.11.020 ↗
44. Numerical prediction of delamination in CFRP drilling10.1016/j.compstruct.2013.10.014 ↗
45. Experimental and numerical research on the potentialities of layered reinforcement configuration of continuous sisal fibers for thin mortar panels10.1016/j.conbuildmat.2015.11.018 ↗
46. Constitutive model to predict the viscoplastic behaviour of natural fibres based composites10.1016/j.compstruct.2016.08.001 ↗
47. Dassault. ABAQUS User’s Manual. ABAQUS/CAE User’s Man 2012:1–847.
48. Standard density measurement method development for flax fiber10.1016/j.indcrop.2016.11.060 ↗
49. Progress in Polymer Science Biocomposites reinforced with natural fibers : 2000–201010.1016/j.progpolymsci.2012.04.003 ↗
50. Composites: Part B Flax fibre and its composites – A review10.1016/j.compositesb.2013.08.014 ↗
51. Experimental design of the bearing performances of fl ax fi ber reinforced epoxy composites by a failure map10.1016/j.compositesb.2018.04.044 ↗
52. Manufacture of compression moulded PLA based biocomposites: a parametric study10.1016/j.compstruct.2015.06.066 ↗
53. A review of mechanical drilling for composite laminates10.1016/j.compstruct.2011.11.024 ↗
54. Experimental analysis of delamination, thrust force and surface roughness on drilling of glass fibre reinforced polymer composites material using different drills10.1016/j.matpr.2017.07.095 ↗
55. A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP)10.1016/j.compstruct.2016.08.004 ↗