journal article·2021-06

Numerical and experimental investigation on 3D angle interlock woven fabric under ballistic impact

Qingsong Wei, Dan Yang, Bohong Gu, Baozhong Sun

Publisher page

Abstract

Abstract 3D woven fabric has great potential applications in body armor due to its good mouldability. This paper reports the ballistic mechanism of 3DAWF under the Full Metal Jacket (FMJ) projectile impact. Numerical simulation of 3DAWF under ballistic impact employing strain rate effect material models was established to capture the yarns’ behaviors under high-speed impact loadings. Membrane elements construct a full-size mesoscale model based on real 3DAWF structure to improve computational efficiencies. The ballistic impact tests of 3DAWF subjected to the FMJ projectile were carried out to validate and evaluate the finite element analysis (FEA) model. From the results of the tests and theoretical model, it was found that the FEA model exhibits a relatively good correlation with tests on residual velocities, deformation, and damages. This work revealed the impact damage evolution, energy absorption mechanism, and the stress wave distribution in the 3DAWF, and the findings are instructive for the design of 3DAWF for ballistic protection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · High-Velocity Impact and Material Behavior · Textile materials and evaluations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Engineering of 3D warp interlock p-aramid fabric structure and its energy absorption capabilities against ballistic impact for body armour applications10.1016/j.compstruct.2019.111179 ↗
2. 3D angle-interlock woven fabric based on plain group P4mm symmetry10.1016/j.compstruct.2019.111539 ↗
3. A novel mesoscopic progressive damage model for 3D angle-interlock woven composites10.1016/j.compscitech.2019.107894 ↗
4. Effect of bias yarn on tensile fracture mechanism of multiaxial 3D angle-interlock woven composites
5. Drop-weight impact behaviors of 3-D angle interlock woven composites after thermal oxidative aging10.1016/j.compstruct.2017.01.046 ↗
6. High-speed visualizing and mesoscale modeling for deformation and damage of 3D angle-interlock woven composites subjected to transverse impacts10.1016/j.ijmecsci.2018.02.044 ↗
7. Yang D, Wei Q, Xin B, Chen X. Research on the creation of TA/LOI compound structure fabric and its ballistic performance for 3D curved-surface ballistic application. Composites Part B: Engineering. 2020.10.1016/j.compositesb.2020.108275 ↗
8. Ballistic impact mechanisms – A review on textiles and fibre-reinforced composites impact responses10.1016/j.compstruct.2019.110966 ↗
9. A model for ballistic impact on multi-layer fabric targets10.1016/j.ijimpeng.2010.01.003 ↗
10. Modeling and validation of full fabric targets under ballistic impact10.1016/j.compscitech.2010.07.025 ↗
11. Effect of Frictions on the Ballistic Performance of a 3D Warp Interlock Fabric: Numerical Analysis10.1007/s10443-011-9202-2 ↗
12. Determination of inter-yarn friction and its effect on ballistic response of para-aramid woven fabric under low velocity impact10.1016/j.compstruct.2014.09.063 ↗
13. Numerical study of inter-yarn friction on the failure of fabrics upon ballistic impacts10.1016/j.matdes.2016.11.013 ↗
14. Ballistic penetration damages and energy absorptions of stacked cross-plied composite fabrics and laminated panels10.1177/1056789520927074 ↗
15. On a multi-scale finite element model for evaluating ballistic performance of multi-ply woven fabrics10.1016/j.compstruct.2018.09.080 ↗
16. Modeling friction effects on the ballistic impact behavior of a single-ply high-strength fabric10.1016/j.ijimpeng.2004.06.008 ↗
17. Modeling the effects of yarn material properties and friction on the ballistic impact of a plain-weave fabric10.1016/j.compstruct.2008.11.012 ↗
18. Finite element modeling of transverse impact on a ballistic fabric10.1016/j.ijmecsci.2005.09.007 ↗
19. Global/Local Modeling of Ballistic Impact onto Woven Fabrics10.1177/0021998308097684 ↗
20. Ballistic impact modeling of woven fabrics considering yarn strength, friction, projectile impact location, and fabric boundary condition effects10.1016/j.compstruct.2012.05.030 ↗
21. Effects of ply orientation and material on the ballistic impact behavior of multilayer plain-weave aramid fabric targets10.1016/j.dt.2018.01.002 ↗
22. Computational analysis of impact of a bullet against the multilayer fabrics in LS-DYNA10.1016/j.ijimpeng.2006.06.002 ↗
23. A Numerical Simulation on Ballistic Penetration Damage of 3D Orthogonal Woven Fabric at Microstructure Level10.1177/1056789510397078 ↗
24. Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact10.1016/j.ijimpeng.2015.08.011 ↗
25. The ballistic impact characteristics of aramid fabrics: The influence of interface friction10.1016/0043-1648(92)90041-6 ↗
26. The effects of strain rate on the mechanical behaviour of kevlar fibre bundles: an experimental and theoretical study10.1016/S1359-835X(98)00038-4 ↗
27. Finite-element modeling of the ballistic impact of fabric armor10.1016/S0734-743X(02)00031-3 ↗
28. Influence of fabric architecture on energy absorption efficiency of soft armour panel under ballistic impact10.1016/j.compstruct.2019.111015 ↗
29. An analytical model to predict impact behaviour of soft armours10.1016/0734-743X(94)00054-Z ↗
30. A numerical study of ply orientation on ballistic impact resistance of multi-ply fabric panels10.1016/j.compositesb.2014.08.049 ↗
31. Comparison of rate-dependent constitutive models with experimental data10.1016/j.ijimpeng.2014.01.006 ↗
32. Development of Fabric Constitutive Behavior for Use in Modeling Engine Fan Blade-Out Events10.1061/(ASCE)0893-1321(2009)22:3(249) ↗
33. A numerical study on the mechanisms of Dyneema® quasi-isotropic woven panels under ballistic impact10.1016/j.compstruct.2020.111855 ↗