journal article·2014-02Open access

Ageing of pultruded glass fibre reinforced polymer composites exposed to combined environmental agents

Guglielmo Carra, Valter Carvelli

Abstract

Abstract This paper presents an experimental research on the durability of pultruded Glass Fibre Reinforced Polymer (GFRP) composites applied in building construction. Three different matrices have been used with E-glass fibres: isophthalic polyester, orthophthalic polyester and vinylester. The degradation of the mechanical and aesthetical performance of the composites has been monitored through a process of accelerated artificial ageing in a climatic chamber, simulating the combined effect of high temperature, freeze–thaw cycles, moisture and ultraviolet (UV) radiation. Tensile, bending and interlinear shear strength tests have been performed to measure the variation of some mechanical properties during six months of artificial exposition. A consistent reduction of the mechanical performance has been observed. Aesthetical appearance has been affected as well both in terms of loss of lightness and colour variation. The data collected have been compared to those after one year of natural ageing in external atmosphere. It has been observed that the considered artificial ageing produces a higher degradation of some mechanical properties if compared to the natural ageing in north Italy climate, accelerating the effects of the environment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Fiber-reinforced polymer composites for construction – state of the art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
2. Investigation of the long term effects of moisture on carbon fibre epoxy matrix composites10.1016/j.compscitech.2012.01.010 ↗
3. Mechanical properties of pultruded glass fiber-reinforced plastic after moistening10.1016/j.compstruct.2012.04.030 ↗
4. Moisture diffusion in glass-fiber-reinforced composite bridge under hot/wet environment10.1016/j.compositesb.2012.04.067 ↗
5. Long-term deterioration of GFRP in water and moist environment10.1061/(ASCE)1090-0268(2002)6:1(21) ↗
6. Recycled poly(ethylene terephthalate) and its short glass fibres composites: effects of hygrothermal aging on the thermo-mechanical behaviour10.1016/j.polymer.2004.09.034 ↗
7. Modified water diffusion kinetics in an unidirectional glass/fibre composite due to the interphase area: experimental, analytical and numerical approach10.1016/j.compstruct.2012.09.044 ↗
8. Fiber-reinforced polymer bars under freeze–thaw cycled and different loading rates10.1177/0021998306063154 ↗
9. Freeze–thaw resistance of unidirectional-fiber-reinforced epoxy composites10.1002/app.34870 ↗
10. Deflection response of glass fiber-reinforced pultruded components in hot weather climates10.1061/(ASCE)1090-0268(2008)12:3(355) ↗
11. Accelerated ageing tests for evaluations of a durability performance of glass–fiber reinforced polyester composites10.1016/S1005-0302(10)60087-4 ↗
12. Photo-oxydation of thermoplastics in bending and in uniaxial compression10.1016/0141-3910(96)00095-X ↗
13. Effects of ultraviolet radiation exposure on vinyl ester resins: characterization of chemical, physical and mechanical damage10.1016/S0141-3910(02)00300-2 ↗
14. Flexural properties loss of unidirectional epoxy/fique composites immersed in water and alkaline medium for construction application10.1016/j.compositesb.2012.04.027 ↗
15. Impact of sea-water on the quasi static fatigue flexural properties of GFRP10.1016/j.compstruct.2012.10.021 ↗
16. Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure10.1061/(ASCE)1090-0268(2003)7:3(238) ↗
17. ISO 4892. Plastics – Methods of Exposure to Laboratory Light Sources – Part 1: General Guidance and Part. 3: Fluorescent UV Lamps. International Organization for Standardization; 1994.
18. Temperature as an accelerating factor for long-term durability testing of FRPs: should there be any limitations?10.1061/(ASCE)CC.1943-5614.0000102 ↗
19. ISO 527. Plastics: Determination of Tensile Properties – Part. 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites. International Organization for Standardization; 1997.
20. ISO 14125. Fiber-Reinforced Plastic Composites – Determination of Flexural Properties. International Organization for Standardization; 1998.
21. ISO 14130. Fiber-Reinforced Plastic Composites – Determination of apparent interlaminar shear strength by short-beam method. International Organization for Standardization; 1997.
22. ISO 7724. Paints and Varnishes – Colorimetry – Part1: Principles, Part 2: Colour Measurement, Part 3 Calculation of Colour Differences. International Organization for Standardization; 1984.
23. Durability of composites in aqueous environments
24. Effects of environmental aging on the properties of pultruded GFRP10.1016/S1359-8368(99)00013-X ↗
25. Environmental effects on the mechanical properties of glass–fiber composite tubular specimens10.1016/j.compscitech.2004.01.017 ↗
26. Durability of fiberglass composite sheet piles in water10.1061/(ASCE)1090-0268(2002)6:4(280) ↗
27. Effects of environmental exposure on fiber-reinforced plastic (FRP) materials used in construction10.1520/CTR10120J ↗
28. Durability and environment degradation of glass–vinylester composites10.1002/pc.20055 ↗
29. Durability of pultruded glass–fiber-reinforced polyester profiles for structural applications10.1007/s11029-006-0042-3 ↗