Performance of concrete-filled double-skin circular tubes in compression
Source abstract
Abstract
Abstract Tests were conducted on 32 concrete-filled double-skin circular tube (CFDSCT) columns. The CFDSCT columns were loaded in axial compression until failure. The parameters that were varied were the lengths, diameters and strength of the outer steel tubes. The lengths ranged from 1.0–2.5 m, in half a metre increments. The CFDSCTs of 1 m lengths, failed by yielding of the steel tubes. All the other CFDSCTs failed by overall buckling due to their large slenderness. Using the philosophy in the South African standard (SANS 10162-1) and Eurocode 4 (EN 1994-1-1), new formulas were developed to predict the results of the strengths of the CFDSCTs. The new formulae are in a similar format to SANS 10162-1 and EC4. A plot of the results from the proposed formulae over the test results, versus the slenderness ratio shows that the results were predicted well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Test on concrete filled double-skin (CHS outer and SHS inner) composite short columns under axial compression10.1016/S0263-8231(02)00009-5 ↗
2. Strength and ductility of concrete-filled double skin (SHS inner and SHS outer) tubes10.1016/S0263-8231(01)00060-X ↗
3. Double-skin composite tubular columns subjected cyclic horizontal force and constant axial force
4. Experimental study on ultimate strength and ductility of concrete filled steel columns under strong earthquakes10.1016/S0143-974X(99)00006-1 ↗
5. Behaviour of tapered concrete-filled double skin steel tubular (CFDST) stub columns10.1016/j.tws.2012.03.019 ↗
6. Performance of new sandwich tube under axial loading: experiment10.1061/(ASCE)0733-9445(1995)121:12(1806) ↗
7. Performance of new sandwich tube under axial loading: analysis10.1061/(ASCE)0733-9445(1995)121:12(1815) ↗
8. Behaviour of concrete-filled double skin (CHS Inner and CHS Outer) steel tubular stub columns and beam-columns10.1016/j.jcsr.2003.11.008 ↗
9. Tests of concrete-filled double skin CHS composite stub columns10.12989/scs.2002.2.2.129 ↗
10. Concrete filled double skin circular stub columns under compression10.1016/j.tws.2009.08.001 ↗
11. BSI (EN ISO 6892-1) · 2009
12. SANS (SANS 5861-3:2006). Concrete tests, Part 3: Making and curing of test specimens. Pretoria: Standards South Africa; 2006.
13. SANS (SANS 5860). Concrete tests – Dimensions, tolerances and uses of cast test specimens Pretoria: Standards South Africa; 2006.
14. SANS (SANS657-1). Steel tubes for non-pressure purposes Part 1: Sections for scaffolding, general engineering and structural applications. Pretoria: Standards South Africa; 2006.
15. EC4 (EN 1994-1-1). Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings. London: British Standards Institution; 2004.
16. SANS (SANS 10162-1). The structural use of steel Part 1: Limit-state design of hot-rolled steelwork. Pretoria: Standards South Africa; 2005.
17. CAN (CSA-S16-09) · 2009