Damage mode identification of open hole composite laminates based on acoustic emission and digital image correlation methods
Source abstract
Abstract
This paper focuses on damage mode identification of composite laminates based on acoustic emission and digital image correlation methods. The effect of different fiber/matrix materials on the damage progression of quasi-isotropic laminates with one open hole was investigated first. The effect of different hole orientations with respect to load direction on the damage mechanism of laminated composites with two interacting holes was studied next. For this purpose, correlation and Principal Component Analyses (PCA) were performed to select the most effective acoustic emission (AE) parameter in clustering. After performing PCA, peak frequency parameter was selected to cluster acoustic emission signals due to its great contribution to the principal component. Damage mechanisms were identified based on cumulative counts and energy parameters of AE events for both aspects mentioned above. The findings of the AE measurement were successfully verified by digital image correlation (DIC) measurements. © 2021 Elsevier Ltd
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Ultrasonics and Acoustic Wave Propagation · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Investigation of displacement amplitude effect on failure mechanisms in open-hole laminated composites under low-cycle fatigue loading using acoustic emission
2. Residual strength and damage characterization of repaired glass/epoxy composite laminates using ae and dic10.1016/j.compstruct.2016.05.005 ↗
3. ASTM, 2017. Standard test method for tensile properties of polymer matrix composite materials. Standard ASTM D3039/D3039M-17, American Society of Testing Materials, West Conshohocken, PA.
4. ASTM, 2018a. Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45 laminate. Standard ASTMD3518/ D3518M-18, American Society of Testing Materials, West Conshohocken, PA.
5. ASTM · 2018
6. ASTM, D., 2002. 3171-99. standard test method for constituent content of composite materials. Annual book of ASTM standards, West Conshohocken, PA.
7. Acoustic emission wavelet transform on adhesively bonded single-lap joints of composite laminate during tensile test10.1177/0731684412459249 ↗
8. Transverse cracking in carbon fiber reinforced polymer composites: Modal acoustic emission and peak frequency analysis10.1016/j.compscitech.2015.05.005 ↗
9. Processing of acoustic signals via wavelet & choi-williams analysis in three-point bending load of carbon/epoxy and glass/epoxy composites10.1016/j.ultras.2017.04.001 ↗
10. Acoustic emission in carbon fibre composites10.1016/0266-3538(90)90012-T ↗
11. Damage evolution and fracture events sequence in various composites by acoustic emission technique
12. A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates10.1016/j.compositesa.2012.03.004 ↗
13. Prediction of size effects in notched laminates using continuum damage mechanics10.1016/j.compscitech.2007.02.005 ↗
14. Damage assessment of composite structures using digital image correlation10.1007/s10443-013-9352-5 ↗
15. Acoustic emission and damage mode correlation in textile reinforced pps composites10.1016/j.compstruct.2016.12.012 ↗
16. A progressive damage model for laminated composites containing stress concentrations10.1177/002199838702100904 ↗
17. Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites10.1016/0266-3538(95)00121-2 ↗
18. Use of diffuse approximation on dic for early damage detection in 3d carbon/epoxy composites10.1016/j.compscitech.2013.08.027 ↗
19. Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy c-means clustering10.1177/0021998311425968 ↗
20. Acoustic emission-based study to characterize the initiation of delamination in composite materials10.1177/0892705713519811 ↗
21. Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron x-ray computed tomography10.1016/j.compscitech.2017.06.006 ↗
22. Numerical and experimental analysis of the interaction between two notches in carbon fibre laminates10.1016/j.compscitech.2007.07.023 ↗
23. Integration of the kohonen’s self-organising map and k-means algorithm for the segmentation of the ae data collected during tensile tests on cross-ply composites10.1016/j.ndteint.2004.09.006 ↗
24. Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers10.1016/j.ndteint.2003.09.010 ↗
25. Damage investigation in cfrp composites using full-field measurement techniques: combination of digital image stereo-correlation, infrared thermography and x-ray tomography10.1016/j.compositesb.2012.11.016 ↗
26. An experimental investigation into the tensile strength scaling of notched composites10.1016/j.compositesa.2006.07.008 ↗
27. On acoustic emission for failure investigation in cfrp: Pattern recognition and peak frequency analyses10.1016/j.ymssp.2010.11.014 ↗
28. Digital image correlation and acoustic emission for damage analysis during tensile loading of open-hole flax laminates10.1016/j.engfracmech.2020.106921 ↗
29. An experimental and numerical investigation into the damage mechanisms in notched composites10.1016/j.compositesa.2009.02.021 ↗
30. Identification of failure modes of composite thin-ply laminates containing circular hole under tension by acoustic emission signals10.1016/j.compstruct.2018.08.019 ↗
31. Use of acoustic emission to identify damage modes in glass fibre reinforced polyester10.1016/S0266-3538(02)00087-8 ↗
32. Ivanov DS, Lomov SV, Bogdanovich AE, Karahan M, Verpoest I. A comparative study of tensile properties of non-crimp 3d orthogonal weave and multi-layer plain weave e-glass composites. part 2: Comprehensive experimental results. Compos Part A 2009;40(8):1144–1157.10.1016/j.compositesa.2009.04.032 ↗
33. Experimental and numerical analysis of progressive damage and failure behavior of carbon woven-pps
34. Waveform based clustering and classification of ae transients in composite laminates using principal component analysis10.1016/S0963-8695(02)00004-X ↗
35. Principal component analysis10.1198/tech.2003.s783 ↗
36. Analysis of damage mechanisms in drilling of composite materials by acoustic emission10.1016/j.compstruct.2015.04.025 ↗
37. Tensile strength of ud-composite laminates with multiple holes10.1016/j.compscitech.2010.04.005 ↗
38. Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation10.1016/j.compstruct.2017.11.060 ↗
39. Failure analysis of multi-pin joints in glass fibre/epoxy composite laminates10.1016/j.compstruct.2009.04.043 ↗
40. A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emission10.1016/j.matdes.2011.12.015 ↗
41. Lomov SV, Bogdanovich AE, Ivanov DS, Mungalov D, Karahan M, Verpoest I. A comparative study of tensile properties of non-crimp 3d orthogonal weave and multi-layer plain weave e-glass composites. part 1: Materials, methods and principal results. Compos Part A 2009;40(8):1134–1143.10.1016/j.compositesa.2009.03.012 ↗
42. Full-field strain measurements for validation of meso-fe analysis of textile composites10.1016/j.compositesa.2007.09.011 ↗
43. Damage evolution in center-holed glass/polyester composites under quasi-static loading using time/frequency analysis of acoustic emission monitored waveforms10.1016/j.compscitech.2005.09.011 ↗
44. Feasibility and limitations of damage identification in composite materials using acoustic emission10.1016/j.compositesa.2015.05.003 ↗
45. Damage classification in carbon fibre composites using acoustic emission: A comparison of three techniques10.1016/j.compositesb.2014.08.046 ↗
46. Correlation of acoustic emission with finite element predicted damages in open-hole tensile laminated composites10.1016/j.compositesb.2016.09.101 ↗
47. Crossed investigation of damage in composites with embedded quantum resistive strain sensors (sqrs), acoustic emission (ae) and digital image correlation (dic)10.1016/j.compscitech.2018.03.023 ↗
48. Wavelet transform of acoustic emission signals in failure of model composites10.1016/S0013-7944(01)00105-9 ↗
49. Damage development in open-hole composite specimens in fatigue. part 2: Numerical modelling10.1016/j.compstruct.2013.05.019 ↗
50. Damage development in open-hole composite specimens in fatigue. part 1: Experimental investigation10.1016/j.compstruct.2013.05.033 ↗
51. Damage mode identification in transverse crack tension specimens using acoustic emission and correlation with finite element progressive damage model10.1016/j.compositesb.2018.11.104 ↗
52. Do high frequency acoustic emission events always represent fibre failure in cfrp laminates?10.1016/j.compositesa.2017.10.013 ↗
53. Multi-instrument in-situ damage monitoring in quasi-isotropic cfrp laminates under tension10.1016/j.compstruct.2018.05.006 ↗
54. Stress analysis and strength prediction of composite laminates with two interacting holes10.1016/j.compstruct.2019.04.041 ↗
55. Stress concentration and strength prediction of 2×)2 twill weave fabric composite with a circular hole10.1177/0021998318785994 ↗
56. Acoustic emission-based damage classification of glass/polyester composites using harmony search k-means algorithm10.1177/0731684412442257 ↗
57. Full-field assessment of the damage process of laminated composite open-hole tensile specimens. part ii: Experimental results10.1016/j.compositesa.2007.01.019 ↗
58. Quantitative acoustic emission and failure mechanics of composite materials10.1016/0041-624X(87)90033-3 ↗
59. Pattern recognition approach to identify natural clusters of acoustic emission signals10.1016/j.patrec.2011.09.018 ↗
60. Sause · 2016 · Vol. 242
61. Quantification of failure mechanisms in mode-i loading of fiber reinforced plastics utilizing acoustic emission analysis10.1016/j.compscitech.2011.10.013 ↗
62. Unsupervised learning for classification of acoustic emission events from tensile and bending experiments with open-hole carbon fiber composite samples10.1016/j.compscitech.2014.12.003 ↗
63. Clustering effect on damage mechanisms in open-hole laminated carbon/epoxy composite under constant tensile loading rate, using acoustic emission10.1016/j.compstruct.2018.07.047 ↗
64. Standard, A., 2010. E976-84. Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response ASTM International, West Conshohocken, PA, USA.
65. Suarez E, Sause M, Gallego A. Influence of an optical fiber embedded on unidirectional cfrp laminates evaluated with the acoustic emission and 3d digital image correlation techniques. Prog Acoust Emiss XVIII, JSNDI IIIAE 2016;441–6.
66. Stress concentration in a circular hole in composite plate10.1016/j.compstruct.2004.02.016 ↗
67. Strength prediction and progressive failure analysis of carbon fiber reinforced polymer laminate with multiple interacting holes involving three dimensional finite element analysis and digital image correlation10.1177/1056789513504123 ↗
68. Failure mechanism discrimination in carbon fibre-reinforced epoxy composites10.1016/0010-4361(83)90153-2 ↗
69. Bending of beams externally reinforced with trc and cfrp monitored by dic and ae10.1016/j.compstruct.2014.02.006 ↗
70. Cracks at elliptical holes: stress intensity factor and finite fracture mechanics solution10.1016/j.euromechsol.2015.09.002 ↗
71. Damage modes recognition and hilbert-huang transform analyses of cfrp laminates utilizing acoustic emission technique10.1007/s10443-015-9454-3 ↗
72. In-situ damage monitoring of a sic/sic ceramic matrix composite using acoustic emission and digital image correlation10.1016/j.compstruct.2016.09.040 ↗
73. Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites10.1016/j.compstruct.2007.06.002 ↗
74. Delamination characterization in composite laminates using acoustic emission features, micro visualization and finite element modeling10.1177/0021998315615691 ↗