An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability
Source abstract
Abstract
Abstract The main aim of this review article was to address the performance of filament wound fibre reinforced polymer (FRP) composite pipes and their critical properties, such as burst, buckling, durability and corrosion. The importance of process parameters concerning merits and demerits of the manufacturing methods was discussed for the better-quality performance. Burst analysis revealed that the winding angle of ±55° was observed to be optimum with minimum failure mechanisms, such as matrix cracking, whitening, leakage and fracture. The reduction of buckling effect was reported in case of lower hoop stress value in the hoop to axial stress ratio against axial, compression and torsion. A significant improvement in energy absorption was observed in the hybrid composite pipes with the effect of thermal treatment. However, the varying winding angle in FRP pipe fabrication was reported as an influencing factor affecting all the aforementioned properties. Almost 90% of the reviewed studies was done using E-glass/epoxy materials for the composite pipe production. By overcoming associated limitations, such as replacing synthetic materials, designing new material combinations and cost-benefit analysis, the production cost of the lightweight FRP composite pipes can be decreased for the real-time applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A review on machinability of carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) composite materials10.1016/j.dt.2018.02.001 ↗
2. A Review on mechanical property of sisal glass fibre reinforced polymer composites10.1016/j.matpr.2017.02.236 ↗
3. Fractography analysis of naturally woven coconut sheath reinforced polyester composite: A novel reinforcement10.1080/03602559.2011.639838 ↗
4. A comparative study on characterisations of Cissus quadrangularis and Phoenix reclinata natural fibres10.1177/0731684415570045 ↗
5. On the mechanical performance of glass-fibre-reinforced thermosetting-resin pipes: a review10.1016/j.compstruct.2016.02.037 ↗
6. Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs10.1016/j.compstruct.2012.12.019 ↗
7. Hybrid reinforced thermoset polymer composite in energy absorption tube application: a review10.1016/j.dt.2018.04.004 ↗
8. Sundén B, Fu J, Sundén B, Fu J. Chapter 7 – Heat pipes for aerospace application. Heat Transf Aerosp Appl 2017:117–44. doi:10.1016/B978-0-12-809760-1.00007-7.10.1016/B978-0-12-809760-1.00007-7 ↗
9. Thick-walled composite tubes for offshore applications: an example of stress and failure analysis for filament-wound multi-layered pipes10.1080/17445302.2015.1067019 ↗
10. Stochastic fatigue analysis of glass fibre reinforced polymer pipes10.1016/j.compstruct.2017.01.068 ↗
11. Thermo-mechanical design and characterization of flexible heat pipes10.1016/j.applthermaleng.2017.01.036 ↗
12. Study of the filament wound glass/polyester composite damage behaviour by acoustic emission data unsupervised learning10.1016/j.apacoust.2017.06.004 ↗
13. Acoustic emission study of impact-damaged GRP pipes
14. Influence of inclined holes on the impact strength of CFRP composites10.1016/j.compstruct.2017.03.086 ↗
15. First-ply failure prediction of glass/epoxy composite pipes using an artificial neural network model10.1016/j.compstruct.2018.05.139 ↗
16. Experimental and statistical analysis of low velocity impact response of filament wound composite pipes10.1016/j.compositesb.2018.05.006 ↗
17. Mechanical performances and evolution of stiffness of thin-walled strain hardening cement-based composites pipes during cyclic loading10.1016/j.conbuildmat.2018.07.001 ↗
18. Evaluating mechanical performance of GFRP pipes subjected to transverse loading10.1016/j.tws.2018.06.037 ↗
19. Effect of non-penetrating impact damages of pre-stressed GRP tubes at low velocities on the burst strength10.1016/j.compositesb.2014.01.003 ↗
20. Low velocity impact of filament-wound glass-fibre reinforced composite pipes
21. Optimization of filament winding parameters for the design of a composite pipe10.1016/j.compositesb.2018.04.056 ↗
22. A filament-wound structure technology overview10.1016/0254-0584(95)01554-X ↗
23. Design and fabrication of low cost filament winding machine
24. Wind angle effects in glass fibre-reinforced polyester filament wound pipes10.1016/0010-4361(84)90727-4 ↗
25. Coreless winding and assembled core – Novel fabrication approaches for FRP based components in building construction10.1016/j.conbuildmat.2016.01.015 ↗
26. Design of filament-wound composite elbows based on non-geodesic trajectories
27. Fabrication of ceramic reinforcement aluminium and its alloys metal matrix composite materials: A Review10.1016/j.matpr.2018.06.223 ↗
28. On the production of continuous fibre reinforced thermoplastic tubes by a centrifugal casting process
29. Manufacturing of centrifuged continuous fibre-reinforced precision pipes with thermoplastic matrix10.1016/j.compscitech.2006.03.015 ↗
30. World · 2009 · 1
31. Mechanical Behaviour of Adhesively Repaired Pipes Subject to Internal Pressure
32. A failure envelope for ±60° filament wound glass fibre reinforced epoxy tubulars10.1016/j.compositesa.2007.11.002 ↗
33. failures and lessons to be
34. Use of Composite Pipe Materials in the Transportation of
35. Brent · 2008
36. 14692–1. Petroleum and natural gas industries – Glass-reinforced plastics (GRP) piping – Part 1: Vocabulary, symbols, applications and
37. Filament wound composite pressure vessels and pipes subject to an internal pressure - an Experimental and Material Characterization Study
38. Dynamic analysis of filament wound pipes undergoing low velocity transverse impact10.1016/0266-3538(92)90118-M ↗
39. Design of Oil and Gas Composite Pipes for Energy Production10.1016/j.egypro.2019.04.016 ↗
40. Pandian A, Hameed Sultan MT, Uthayakumar M, Md Shah A. Low Velocity Impact Studies on Fibre-Reinforced Polymer Composites and Their Hybrids – Review, 2019. doi:10.1016/B978-0-12-803581-8.11289-5.10.1016/B978-0-12-803581-8.11289-5 ↗
41. Fracture of laminated woven GFRP composite pressure vessels under combined low-velocity impact and internal pressure10.1016/j.acme.2018.07.006 ↗
42. An experimental investigation on high velocity impact behaviour of hygrothermal aged CFRP composites10.1016/j.compstruct.2018.08.009 ↗
43. Analysis of a glass fibre reinforced polyurethane composite repair system for corroded pipelines at elevated temperatures10.1016/j.compstruct.2014.04.015 ↗
44. Experimental investigation of fatigue damage formation of hybrid pipes subjected to impact loading under internal pre-stress10.1016/j.compositesb.2017.03.051 ↗
45. On the impact-induced damage in glass fibre reinforced epoxy pipes10.1016/j.ijimpeng.2016.06.002 ↗
46. Behaviour of grout-filled double-skin steel tubular T-joint subjected to low-velocity impact10.1016/j.tws.2019.106270 ↗
47. An alternative methodology to repair localized corrosion damage in metallic pipelines with epoxy resins10.1016/j.matdes.2009.02.026 ↗
48. RPS Composite systems n.d.
49. Knight Michelle. Chemical resistance and chemical applications for CPVC pipe and fittings. Lubrizol n.d. https://www.corzan.com/en-us/chemical-resistance-and-chemical-applications.
50. Polymer Matrix Composites: A Perspective for a special issue of polymer reviews10.1080/15583724.2012.708004 ↗
51. Optimal design of composite helicopter power transmission shafts with axially varying fibre lay-up10.4050/JAHS.40.50 ↗
52. Case study. n.d.
53. Azida Che Lah N, Golestaneh AF. Developing a hybrid, carbon/glass fibre-reinforced, epoxy composite automotive drive shaft10.1016/j.matdes.2009.06.015 ↗
54. Ben · 2008
55. No Title n.d. www.amitech.com.br%0A.
56. No Title n.d.
57. Repairing impact damaged fibre reinforced composite pipes by external wrapping with composite patches10.1016/j.compstruct.2014.12.017 ↗
58. An experimental study on the effects of various drill types on drilling performance of GFRP composite pipes and damage formation10.1016/j.compositesb.2019.05.023 ↗
59. Impact behaviour of carbon fibre/epoxy composite tubes reinforced with multi-walled carbon nanotubes at cryogenic environment10.1016/j.compositesb.2018.03.027 ↗
60. Don’t overlook composite FRP pipe
61. Chemical Resistance · 2008 · 36
62. Experimental investigation of GF/epoxy laminates with different SMAs positions subjected to low-velocity impact10.1016/j.compstruct.2017.02.094 ↗
63. Fatigue behaviour of filament wound E-glass/epoxy composite tubes damaged by low velocity impact10.1016/j.compositesb.2013.06.039 ↗
64. Effects of the number of fatigue cycles on the impact behaviour of glass fibre/epoxy composite tubes10.1016/j.compositesb.2017.04.021 ↗
65. Glass fibre-reinforced polymer composites – a review10.1177/0731684414530790 ↗
66. Carbon fibre-reinforced polymer composites: Preparation, properties and applications10.1002/9783527645213.ch5 ↗
67. Kevlar reinforced polymer matrix composite for structural application. IOP Conf Ser
68. Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites10.1016/j.compositesb.2011.11.009 ↗
69. Tensile and flexural properties of sisal fibre reinforced epoxy composite: a comparison between unidirectional and mat form of fibres10.1016/j.mspro.2014.07.489 ↗
70. Banana fibre reinforced polymer composites - a review10.1177/0731684409360578 ↗
71. Hemp fibre and its composites - a review10.1177/0021998311413623 ↗
72. Estimation of the tensile strength of an oriented flax fibre-reinforced polymer composite10.1016/j.compositesa.2011.05.005 ↗
73. Mechanical properties of kenaf fibre reinforced polymer composite: a review10.1016/j.conbuildmat.2014.11.043 ↗
74. Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites10.1016/j.conbuildmat.2016.02.182 ↗
75. Transverse impact response of filament wound basalt composite tubes10.1016/j.compositesb.2017.01.005 ↗
76. Farshad · 2011
77. Buckle propagation of sandwich pipes under external pressure10.1016/j.engstruct.2018.08.033 ↗
78. Overall buckling behaviour of laminated CFRP tubes with off-axis ply orientation in axial compression10.1515/secm-2019-0007 ↗
79. Stability analysis of composite thin-walled pipes conveying fluid10.1016/j.oceaneng.2018.04.061 ↗
80. Growth Opportunities in the Global FRP Pipe Market. 2018.
81. Experimental investigation and impact analysis of GFRP composite laminates10.1016/j.matpr.2015.07.291 ↗
82. Impact fretting wear behaviour of 304 stainless steel thin-walled tubes under low-velocity10.1016/j.triboint.2016.10.002 ↗
83. Low velocity transverse impact of filament-wound pipes: Part 2. Residual properties and correlations with impact damage10.1016/0263-8223(92)90011-Z ↗
84. Low velocity transverse impact of filament-wound pipes: Part 1. Damage due to static and impact loads10.1016/0263-8223(92)90010-A ↗
85. Impactor mass and specimen geometry effects in low velocity impact of laminated composites10.1016/0734-743X(92)90408-L ↗
86. Failure mechanisms during the transverse loading of filament-wound pipes under static and low velocity impact conditions10.1016/0010-4361(92)90437-Y ↗
87. Design of thick composite cylinders10.1115/1.3265597 ↗
88. Theory of elasticity of an anisotropic elastic body by S10.1107/S0365110X64002171 ↗
89. A H, Abdul Majid MS, Afendi M, Ahmad Marzuki HF, Krishnan P, N.A.M. A. 2015. Burst strength of glass fibre/epoxy composite pipes subjected to impact loading. Appl. Mech. Mater. 786. doi:10.4028/www.scientific.net/AMM.786.121.10.4028/www.scientific.net/AMM.786.121 ↗
90. Fatigue failure behaviour of glass/epoxy ±55 filament wound pipes under internal pressure10.1016/j.compscitech.2004.10.002 ↗
91. Failure analysis of (±55°)3 filament wound composite pipes with an inclined surface crack under static internal pressure10.1016/j.compstruct.2009.07.027 ↗
92. Low velocity impact response of prestressed functionally graded hybrid pipes10.1016/j.compositesb.2016.09.025 ↗
93. Numerical and experimental investigation of impact on filament wound glass reinforced epoxy pipe10.1177/0021998314525485 ↗
94. Structural and functional failure pressure of filament wound composite tubes10.1016/j.matdes.2011.11.029 ↗
95. Burst failure load of composite pressure vessels10.1016/j.compstruct.2008.06.021 ↗
96. Progressive fatigue failure behaviour of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure10.1016/j.matdes.2009.04.025 ↗
97. cSahin ÖS. Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure10.1007/s10853-008-2820-x ↗
98. UV-cured FRP joint thickness effect on coupled composite pipes10.1016/j.compstruct.2006.05.009 ↗
99. Analysis of multi-layered filament-wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations10.1016/j.compstruct.2008.05.017 ↗
100. Experimental and analytical investigation of the cylindrical part of a metallic vessel reinforced by filament winding while submitted to internal pressure10.1016/j.ijpvp.2009.06.002 ↗