Intrados strengthening of brick masonry arches with different FRCM composites: Experimental and analytical investigations
Source abstract
Abstract
Abstract Fabric-Reinforced Cementitious Matrix (FRCM) materials are becoming increasingly suitable for strengthening of historic masonry constructions but only few experimental studies are still available concerning their application on structural elements. In the paper, the structural behavior of masonry arches strengthened at the extrados with a poliparafenilenbenzobisoxazole (PBO) fabric reinforced cementitious mortar composite is investigated through an experimental and analytical approach. The experimental tests were performed both on unstrengthened and strengthened masonry arches in order to evaluate the contribution of the strengthening material in terms of maximum load and post-peak behavior. The failure mechanisms were also analyzed and discussed. Beam tests were carried out in order to evaluate the bond capacity of the FRCM–masonry interface. The tested arches were analyzed using the approach of the limit analysis of the collapse mechanisms, which was able to accurately estimate the experimental collapse loads.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Structural behavior of arch models strengthened using FRP strips of different lengths10.1061/(ASCE)CC.1943-5614.0000325 ↗
2. Strengthening of masonry arches with composite materials
3. Intrados strengthening of brick masonry arches with composites materials10.1016/j.compositesb.2011.03.005 ↗
4. Behavior of thin masonry arches repaired using composite materials
5. Limit analysis of masonry arches with externally bonded FRP reinforcements10.1016/j.cma.2006.03.003 ↗
6. Limit analysis of masonry arches with finite compressive strength and externally bonded reinforcement10.1016/j.compositesb.2012.04.015 ↗
7. Debonding of FRP in multi-span masonry arch structures via limit analysis10.1016/j.compstruct.2013.10.006 ↗
8. Experimental tests and numerical modeling of reinforced masonry arches10.1016/j.engstruct.2009.12.005 ↗
9. Fast and reliable non-linear heterogeneous FE approach for the analysis of FRP-reinforced masonry arches10.1016/j.compositesb.2015.11.005 ↗
10. Behavior of brick masonry vaults strengthened by FRP laminates10.1061/(ASCE)1090-0268(2001)5:3(163) ↗
11. Strength assessment of masonry arch retrofitted using composite reinforcements
12. Towards a methodology for estimating strength and collapse mechanism in masonry arches strengthened with Fibre Reinforced Polymer applied on external surfaces10.1617/s11527-007-9328-8 ↗
13. Experimental behavior of FRP strengthened masonry arches10.1061/(ASCE)CC.1943-5614.0000086 ↗
14. Strengthening of masonry arches using carbon plates10.1016/j.conbuildmat.2014.12.089 ↗
15. Round robin test for composite-to-brick shear bond characterization10.1617/s11527-012-9883-5 ↗
16. FRP/masonry debonding: numerical and experimental study of the role of mortar Joints10.1061/(ASCE)CC.1943-5614.0000282 ↗
17. Experimental study of bond behavior of CFRP-to-brick joints
18. Flexural strengthening of RC beams with cement based composites10.1061/(ASCE)CC.1943-5614.0000218 ↗
19. Strengthening of masonry unreinforced concrete railway bridges with PBO-FRCM materials10.1016/j.compstruct.2013.03.002 ↗
20. Performance of RC slab-type elements strengthened with fabric-reinforced cementitious-matrix composites
21. Structural behaviour of fabric reinforced cementitious matrix (FRCM) strengthened concrete columns under eccentric loading10.1016/j.compositesb.2015.01.042 ↗
22. Structural performances of reinforced concrete beams strengthened in shear with a cement based fiber composite material10.1016/j.compstruct.2014.11.059 ↗
23. Carbon-FRCM materials for structural upgrade of masonry arch road bridges10.1016/j.compositesb.2015.01.024 ↗
24. URM walls strengthened with fabric-reinforced cementitious matrix composite subjected to diagonal compression10.1061/(ASCE)CC.1943-5614.0000441 ↗
25. Out-of-plane behavior of URM walls strengthened with fabric-reinforced cementitious matrix composite10.1061/(ASCE)CC.1943-5614.0000457 ↗
26. Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures10.1016/j.compstruct.2013.08.026 ↗
27. Strengthening of masonry arches with Textile-Reinforced Mortar: experimental behavior and analytical approaches10.1617/s11527-014-0339-y ↗
28. Experimental investigation on bond behavior of cement-matrix-based composites for strengthening of masonry structures
29. Mortar-based systems for externally bonded strengthening of masonry10.1617/s11527-014-0360-1 ↗
30. Bond behavior of SRG-strengthened masonry units: testing and numerical modeling10.1016/j.conbuildmat.2014.04.070 ↗
31. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
32. Experimental and analytical investigation on bond between Carbon-FRCM materials and masonry10.1016/j.compositesb.2012.10.018 ↗
33. Extrados strengthening of brick masonry arches with PBO-FRCM composites: experimental and analytical investigations10.1016/j.compstruct.2016.04.030 ↗
34. Simulations and analyses of arched brick structures10.1016/j.autcon.2011.01.005 ↗
35. Rehabilitation of masonry arches with compatible advanced composite material10.1016/j.conbuildmat.2011.03.065 ↗
36. Strengthening of brick masonry arches with externally bonded steel reinforced composites10.1061/(ASCE)CC.1943-5614.0000030 ↗
37. European Standard UNI EN 772–1:2011. Methods of test for masonry units – Determination of compressive strength.
38. European Standard UNI EN 1015-11:2007. Methods of test for mortar for masonry – Determination of flexural and compressive strength of hardened mortar.
39. European standard UNI EN EN 1052-3:2007. Methods of test for masonry – Determination of initial shear strength.
40. Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites10.1061/(ASCE)1090-0268(2006)10:3(223) ↗
41. In-plane shear performance of masonry panels strengthened with FRP10.1016/j.compositesb.2006.11.004 ↗
42. Bond-slip relations for PBO-FRCM materials externally bonded to concrete10.1016/j.compositesb.2012.06.002 ↗
43. Experimental analysis on bond between PBO-FRCM strengthening materials and concrete10.1016/j.compositesb.2012.03.011 ↗
44. Role of the matrix layers in the stress transfer mechanism of FRCM composites bonded to a concrete substrate
45. Matrix-fiber bond behavior in PBO FRCM composites: a fracture mechanics approach10.1016/j.engfracmech.2014.01.011 ↗
46. Strengthening of masonry arches with fiber-reinforced polymer strips10.1061/(ASCE)1090-0268(2004)8:3(191) ↗
47. Coupling effect between masonry spandrels and piers10.1617/s11527-008-9405-7 ↗
48. In-plane behavior of perforated brick masonry walls10.1617/s11527-011-9814-x ↗
49. Masonry arches strengthened with composite unbonded tendons10.1016/j.compstruct.2012.10.040 ↗
50. Resisting system and failure modes of masonry domes10.1016/j.engfailanal.2014.05.005 ↗
51. Italian National Research Council (CNR). Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. CNR-DT200 R1/2013, Rome.
52. A study of the fracture process at the FRP-masonry interface: the role of the periodic pattern of bricks and mortar joints10.4028/www.scientific.net/KEM.624.611 ↗
53. Periodic variation of the transferable load at the FRP-masonry interface10.1016/j.compstruct.2015.03.008 ↗
54. FRP-masonry interfacial debonding: An energy balance approach to determine the influence of the mortar joints10.1016/j.euromechsol.2015.08.003 ↗
55. The effect of the shape of the cohesive material law on the stress transfer at the FRP-masonry interface10.1016/j.compositesb.2016.11.012 ↗
56. Role of the matrix layers in the stress-transfer mechanism of FRCM composites bonded to a concrete substrate10.1061/(ASCE)EM.1943-7889.0000883 ↗
57. Matrix–fiber bond behavior in PBO FRCM composites: a fracture mechanics approach10.1016/j.engfracmech.2014.01.011 ↗
58. Analysis of the bond between Fabric Reinforced Cementitious Mortar (FRCM) strengthening systems and concrete10.1016/j.compositesb.2014.10.027 ↗
59. An indirect method to calibrate the interfacial cohesive material law for FRCM-concrete joints10.1016/j.matdes.2017.04.038 ↗