Bond behaviour of recycled aggregate concrete with basalt fibre-reinforced polymer bars
Source abstract
Abstract
Abstract The combination of recycled aggregate concrete (RAC) and fibre-reinforced polymer (FRP) bars can effectively avoid corrosion. Bond performance is an important factor affecting the bearing capacity of RAC structures reinforced with FRP bars. In this study, the effects of the contact interface, concrete type, bar dimension, and surface shape of FRP bars on the bond performance of 39 pull-out specimens were investigated. The failure mode was analysed, and the evolution of damage at the interface between the concrete and basalt fibre-reinforced polymer (BFRP) bars was investigated. Moreover, the bond mechanism and the characteristics of the bond stress-slip curves were revealed. The effects of the design parameters on the bond strength, bond stiffness, residual bond strength, and slip were determined. A constitutive model was proposed to simulate the bond stress-slip relationship. Formulae to estimate the characteristic parameters were derived to develop the proposed model. The proposed model was shown to agree well with the experimental bond stress-slip curves. Finally, the development length of the BFRP bar-reinforced RAC structures was determined. The findings from this study could promote the application of BFRP bar-reinforced RAC structures and provide an experimental and theoretical basis for the design of their bond performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Behavior of CFSC-encased shear connectors in steel-concrete joints: Push-Out Tests10.1061/(ASCE)ST.1943-541X.0002577 ↗
2. Investigation on effect of aggregate on three non-destructive testing properties of concrete subjected to sulfuric acid attack10.1016/j.conbuildmat.2016.04.017 ↗
3. Buckling behavior of circular steel tubes infilled with C170/185 ultra-high-strength concrete under fire10.1016/j.engstruct.2020.110523 ↗
4. Behavior of grouped stud shear connectors between precast high-strength concrete slabs and steel beams
5. FRP-confined square concrete columns with section curvilinearization under axial compression10.1061/(ASCE)CC.1943-5614.0000999 ↗
6. Investigation on the interfacial behaviour between the rubber-cement matrix of the rubberized concrete10.1016/j.jclepro.2018.10.305 ↗
7. Utilization of unprocessed steel slag as fine aggregate in normal- and high-strength concrete10.1016/j.conbuildmat.2019.01.178 ↗
8. Study on the optimum initial curing condition for fly ash and GGBS based geopolymer recycled aggregate concrete10.1016/j.conbuildmat.2020.118540 ↗
9. Adding ceramic polishing waste as paste substitute to improve sulphate and shrinkage resistances of mortar10.1016/j.powtec.2019.11.117 ↗
10. Seismic performance of recycled aggregate concrete-filled glass fibre-reinforced polymer-steel composite tube columns10.1016/j.conbuildmat.2019.07.238 ↗
11. Experimental investigation on the behavior of GFRP-RAC-steel double-skin tubular columns under axial compression10.1016/j.tws.2018.08.026 ↗
12. Dynamic performance of RAC-filled double-skin tubular columns subjected to cyclic axial compression10.1016/j.conbuildmat.2020.118665 ↗
13. Static and impact behaviour of recycled aggregate concretes under daily temperature variations10.1016/j.jclepro.2018.04.237 ↗
14. Mechanical properties of sea sand recycled aggregate concrete under axial compression10.1016/j.conbuildmat.2018.04.136 ↗
15. An overview of study on recycled aggregate concrete in China (1996–2011)10.1016/j.conbuildmat.2011.12.074 ↗
16. Compressive behaviour of recycled aggregate concrete under impact loading10.1016/j.cemconres.2015.01.014 ↗
17. Axial compression behavior of recycled-aggregate-concrete-filled GFRP–steel composite tube columns10.1016/j.engstruct.2020.110676 ↗
18. Microstructural analysis of recycled concrete using X-ray microtomography10.1016/j.cemconres.2015.11.010 ↗
19. Micro- and macro-porosity of dry- and saturated-state recycled aggregate concrete10.1016/j.jclepro.2018.11.243 ↗
20. Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics – Porosity assessment based on pore segmentation from backscattered electron image analysis10.1016/j.conbuildmat.2019.03.265 ↗
21. Strength and durability of concrete containing recycled concrete aggregates10.1016/j.jobe.2018.05.007 ↗
22. Shear behavior of three types of recycled aggregate concrete10.1016/j.conbuildmat.2019.05.079 ↗
23. Carbonation behaviour of recycled aggregate concrete10.1016/j.cemconcomp.2015.04.017 ↗
24. Durability of recycled aggregate concrete – A review10.1016/j.cemconcomp.2018.03.008 ↗
25. Bond performance between fibre-reinforced polymer bars and concrete under pull-out tests10.1016/j.conbuildmat.2019.116803 ↗
26. Effect of loading rates on bond behaviour between basalt fibre-reinforced polymer bars and concrete10.1016/j.conbuildmat.2019.117138 ↗
27. Evaluation of bond stress-slip models for FRP reinforcing bars in concrete10.1016/j.compstruct.2013.07.037 ↗
28. Bond strength of glass fiber reinforced polymer ribbed rebars in normal strength concrete10.1016/j.conbuildmat.2008.04.011 ↗
29. Bond Behavior of Fiber Reinforced Polymer Bars under Direct Pullout Conditions10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
30. Bond Performances of FRP Rebars-Reinforced Concrete10.1061/(ASCE)0899-1561(2007)19:3(205) ↗
31. Bond mechanism and bond strength of GFRP bars to concrete: A review10.1016/j.compositesb.2016.04.068 ↗
32. Pour SM, Alam MS, Milani AS. Improved bond equations for fiber-reinforced polymer bars in concrete. Mater 2016; 9:737.10.3390/ma9090737 ↗
33. Eligehausen R, Popov EP, Bertero VV. Local bond stress-slip relationships of deformed bars under generalized excitations. Report No. UCB/EERC-83/23, Berkeley, California, USA: University of California. 1983.
34. Behavior and modeling of bond of FRP rebars to concrete10.1061/(ASCE)1090-0268(1997)1:2(40) ↗
35. Cosenza E, Manfredi G, Realfonzo R. Analytical modelling of bond between FRP reinforcing bars and concrete. In: Taerwe L, editor. Proc., 2nd int. RILEM symp. (FRPRCS-2); 1995.
36. Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars10.1016/S0950-0618(98)00027-0 ↗
37. Modeling of bond of sand-coated deformed glass fibre-reinforced polymer rebars in concrete
38. Bond characteristics of straight- and headed-end, ribbed-surface, GFRP bars embedded in high-strength concrete10.1016/j.conbuildmat.2015.03.025 ↗
39. Experimental investigations on the bond behavior between concrete and FRP reinforcing bars10.1016/j.conbuildmat.2018.03.169 ↗
40. Development length of FRP straight rebars10.1016/S1359-8368(02)00051-3 ↗
41. Development length of straight FRP composite bars embedded in concrete10.1177/0731684408100262 ↗
42. Long-term bond durability of fiber-reinforced polymer bars embedded in seawater sea-sand concrete under ocean environments10.1061/(ASCE)CC.1943-5614.0000876 ↗
43. Bond durability of BFRP bars embedded in concrete under seawater conditions and the long-term bond strength prediction10.1016/j.matdes.2015.12.066 ↗
44. Bond durability of steel-FRP composite bars embedded in seawater sea-sand concrete under constant bending and shearing stress10.1016/j.conbuildmat.2018.10.154 ↗
45. Experimental study on the bond durability between steel-FRP composite bars (SFCBs) and sea sand concrete in ocean environment10.1016/j.conbuildmat.2016.04.052 ↗
46. Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete10.1016/j.compositesb.2007.03.008 ↗
47. Fibres for enhancing of the bond capacity between GFRP rebar and concrete10.1016/j.conbuildmat.2013.10.089 ↗
48. Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars10.1016/j.conbuildmat.2015.12.145 ↗
49. A new method for pull out test of reinforcing bars in plain and fibre reinforced concrete10.1016/j.engstruct.2018.02.080 ↗
50. Synergistic effects of steel fibres and expansive agent on steel bar-concrete bond10.1016/j.cemconcomp.2019.103380 ↗
51. ACI Committee 440. Guide for the Design and Construction of Concrete Reinforced with FRP Bars (440.1R-06).American Concrete Institute, Farmington Hills, Michigan, USA. (2006).