Application of digital image correlation in investigating the bond between FRP and masonry
Source abstract
Abstract
Abstract Full characterization of the bond behavior between Fiber Reinforced Polymers (FRPs) and masonry in externally bonded reinforcement (EBR) technique is crucial at the design stage or structural performance prediction. In this regard, a full-field assessment technique seems to be valuable for an adequate characterization of the bond behavior. The digital image correlation (DIC) and feature tracking techniques have been used in this study for investigating the evolution of strains and deformation during uniaxial tensile tests and shear debonding tests in FRP-masonry systems. The results show that the DIC is a valuable technique for characterization of the bond behavior and investigating its three-dimensional aspects. The DIC was also found applicable for following the matrix crack development in Steel Reinforced Grout (SRG) specimens. Feature tracking method was used for monitoring the strains development on the steel fibers in SRG specimens during tensile tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Health Monitoring Techniques · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Experimental bond behavior of FRP sheets glued on brick masonry10.1061/(ASCE)CC.1943-5614.0000147 ↗
2. Round robin test for composite-to-brick shear bond characterization10.1617/s11527-012-9883-5 ↗
3. Numerical analysis of bond behavior between masonry bricks and composite materials10.1016/j.engstruct.2012.05.022 ↗
4. Numerical study of the role of mortar joints in the bond behavior of FRP-strengthened masonry10.1016/j.compositesb.2012.10.017 ↗
5. Assessment of bonding stresses between FRP sheets and masonry pillars during delamination tests10.1016/j.compositesb.2012.01.080 ↗
6. Three-dimensional effects induced by FRP-from-masonry delamination10.1016/j.compstruct.2011.01.022 ↗
7. Measuring displacement fields by cross-correlation and a differential technique: experimental validation10.1117/1.OE.51.4.043602 ↗
8. Planar strain measurements on wood specimens10.1007/s11340-008-9162-0 ↗
9. Cross-correlation and differential technique combination to determine displacement fields10.1111/j.1475-1305.2010.00740.x ↗
10. Investigation of the interface fracture during debonding between FRP and masonry10.1260/136943309789867890 ↗
11. Direct determination of cohesive stress transfer during debonding of FRP from concrete10.1016/j.compstruct.2010.05.024 ↗
12. Sutton · 2009
13. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
14. ARAMIS user manual–Software – v6.0.2-6; 2009.
15. Stereovision measurements on evaluating the modulus of elasticity of wood by compression tests parallel to the grain10.1016/j.conbuildmat.2011.06.012 ↗
16. Xavier J, Custodio J, Morais J, Guedes R. Assessing mechanical properties of a polymer material by a video extensometer technique. In: Proc of 7th EUROMECH. Lisbon, Portugal; 2009. p. 253–60.
17. EN 772-1. Methods of test for masonry units – Part 1: Determination of compressive strength; 2011.
18. EN ISO 527-1. Plastics-determination of tensile properties – Part 1: General principles; 2012.
19. EN 1015-11. Methods of test mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar. 2007.
20. ASTM D7565-10. Standard test method for determining tensile properties of fiber reinforced polymer matrix composites used for strengthening of civil structures; 2010.
21. Digital image correlation measurements as a tool of composites deformation description10.1016/j.commatsci.2012.04.034 ↗
22. Maekawa · 2003