On the mechanical performance of glass-fibre-reinforced thermosetting-resin pipes: A review
Source abstract
Abstract
Abstract A comprehensive review is conducted on the performed investigations in the field of mechanical behaviour of glass-fibre reinforced thermosetting-resin (GFRP) pipes. Classified into six categories of stress/strain analysis, failure evaluation, environmental issues, viscoelastic behaviour and creep analysis, fatigue analysis and impact analysis, the main streamline of the performed and on-going studies in current years have been outlined. The recent trend and challenges in conducted researches are highlighted and discussed. Performing a gap analysis, new perspectives which are still required to be developed more deeply for their industrial applications or have not been addressed in literature are nominated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
2. AWWA manual M45 · 2005
3. Watkins · 2000
4. .
5. .
6. .
7. Analysis of multi-layered filament wound composite pipes under internal pressure10.1016/S0263-8223(01)00061-7 ↗
8. Bending behavior of filament wound fibre-reinforced sandwich pipes10.1016/S0263-8223(01)00181-7 ↗
9. Analysis of transverse loading for laminated cylindrical pipes10.1016/S0263-8223(01)00011-3 ↗
10. Stress analysis of transverse loading for laminated cylindrical composite pipes: an approximated 2-D elasticity solution10.1016/j.compscitech.2005.07.018 ↗
11. Stress–strain analysis of a cylindrical pipe subjected to a transverse load and large deflection10.1016/j.compstruct.2008.03.031 ↗
12. Analysis of filament-wound fibre reinforced sandwich pipe under combined internal pressure and thermomechanical loading10.1016/S0263-8223(00)00137-9 ↗
13. Analysis of multi-layered filament-wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations10.1016/j.compstruct.2008.05.017 ↗
14. Dynamic analysis of multi-layered filament-wound composite pipes subjected to cyclic internal pressure and cyclic temperature10.1016/j.compstruct.2009.09.058 ↗
15. Stress and deformation of multiple winding angle hybrid filament-wound thick cylinder under axial loading and internal and external pressure10.1016/j.compstruct.2015.05.036 ↗
16. Probabilistic analysis of the mechanical response of thick composite pipes under internal pressure10.1016/j.ijpvp.2012.05.001 ↗
17. The influence of production inconsistencies on the functional failure of GRP pipes10.12989/scs.2015.19.6.1369 ↗
18. Failure of glass/polyester filament wound pipes10.1016/0010-4361(78)90513-X ↗
19. Winding angle effects in glass fibre reinforced polyester filament wound pipes10.1016/0010-4361(84)90727-4 ↗
20. Fracture stresses for ±75 degree filament wound GRP tubes under biaxial loads10.1243/03093247V203139 ↗
21. Effect of winding angle on the failure of filament wound pipes10.1016/0010-4361(78)90180-5 ↗
22. Theoretical investigation into the effect of the winding angle of the fibres on the strength of filament wound GRP pipes subjected to combined external pressure and axial compression10.1016/0263-8223(92)90064-J ↗
23. Failure of composite cylinders under combined external pressure and axial loading10.1016/0263-8223(92)90055-H ↗
24. The strength of a filament wound composite under biaxial loading10.1016/0010-4361(78)90177-5 ↗
25. Influence of winding angle on the strength and deformation of filament-wound composite tubes subjected to uniaxial and biaxial loads10.1016/0266-3538(93)90182-G ↗
26. Mechanical behaviour of ±55° filament-wound glass-fibre/epoxy-resin tubes: Part I-Microstructure analyses and mechanical behaviour and damage mechanisms of composite tubes under pure tensile, pure internal pressure and combined loading10.1016/S0266-3538(96)00124-8 ↗
27. Mechanical behaviour of ±55° filament-wound glass-fibre/epoxy-resin tubes: Part II-Micromechanical modelling of the damage initiation-competition of the different mechanisms
28. Mechanical behaviour of ±55° filament wound glad-fibre/epoxy-resin tubes: Part III-Macromechanical model of the macroscopic behavior of tubular structures with damage and failure envelope prediction10.1016/S0266-3538(97)00078-X ↗
29. The influence of winding patterns on the damage behaviour of filament-wound pipes10.1016/S0266-3538(98)00184-5 ↗
30. Influence of variable scattering on the optimum winding angle of cylindrical laminated composites10.1016/S0263-8223(01)00012-5 ↗
31. An experimental investigation on the effect of multi-angle filament winding on the strength of tubular composite structures10.1016/S0266-3538(03)00198-2 ↗
32. A failure envelope for ±60° filament wound glass fibre reinforced epoxy tubular10.1016/j.compositesa.2007.11.002 ↗
33. A computational strategy for the analysis of damage in composite pipes10.1016/j.compscitech.2007.10.050 ↗
34. Mechanical behavior of GRP pressure pipes with addition of quarts sand filler10.1177/0021998310385593 ↗
35. Structural and functional failure pressure of filament wound composite tubes10.1016/j.matdes.2011.11.029 ↗
36. The effect of stress ratio on the fracture morphology of filament wound composite tubes10.1016/j.matdes.2013.01.026 ↗
37. Reviewing some design issues for filament wound composite tubes10.1016/j.matdes.2013.09.059 ↗
38. Experimental and theoretical investigations on the failure of filament wound GRP pipes10.1016/j.compositesb.2012.04.009 ↗
39. Apparent hoop tensile strength prediction of glass fibre-reinforced polyester pipes10.1177/0021998312447209 ↗
40. Modelling and experimental evaluation of functional failure pressures in glass fibre reinforced polyester pipes10.1016/j.commatsci.2014.03.036 ↗
41. Stochastic analysis of functional failure pressures in glass fibre reinforce polyester pipes10.1016/j.matdes.2014.12.003 ↗
42. Simulation of functional failure in GRP mortar pipes10.1016/j.compstruct.2014.03.024 ↗
43. Influence of the filament winding tension on physical and mechanical properties of reinforced composites10.1016/S1359-835X(02)00209-9 ↗
44. Influence of filament winding parameters on composite vessel quality and strength10.1016/S1359-835X(97)00073-0 ↗
45. The effect of fibre volume fraction on filament wound composite pressure vessel strength10.1016/S1359-8368(01)00009-9 ↗
46. Quantification of leakage damage in high-pressure fibre reinforced polymer composite tubular vessels10.1016/j.polymertesting.2006.09.009 ↗
47. Leakage failure in fibre-reinforced polymer composite tubular vessels at elevated temperature10.1016/j.polymertesting.2011.09.003 ↗
48. Failure analysis of (±55°) filament wound composite pipes with an inclined surface crack under static internal pressure10.1016/j.compstruct.2009.07.027 ↗
49. The effect of cylindrical defects on the tensile strength of glass fibre/vinyl-ester matrix reinforced composite pipes10.1016/j.compstruct.2006.01.011 ↗
50. Structural analysis and optimum design of GRP pipes based on properties of materials10.1016/j.conbuildmat.2012.07.115 ↗
51. Residual stresses associated with post-cure shrinkage in GRP tube10.1016/S0266-3538(96)00108-X ↗
52. Characterization of residual stresses in wound composite tubes10.1016/j.compositesa.2005.03.026 ↗
53. A study on the coupling between the phenomena of water absorption and damage in glass/epoxy composite pipes10.1016/S0266-3538(97)00076-6 ↗
54. Water absorption behavior and its influence on properties of GRP pipes10.1177/0021998306067265 ↗
55. Effect of water absorption of the mechanical behavior of fibreglass pipes used for offshore service waters10.1016/j.compstruct.2007.04.020 ↗
56. Influence of moisture absorption on GIC and flexural properties of GRP pipes10.1177/0731684410366063 ↗
57. Biaxial failure envelope and creep testing of fibre reinforced plastic pipes in high temperature aqueous environments10.1177/0021998302036003516 ↗
58. Seawater effect on impact behavior of glass-epoxy composite pipes10.1016/j.compositesb.2011.11.006 ↗
59. Transverse impact and axial compression behaviors of glass/epoxy pipes subjected to seawater and impact loading10.1177/1056789513475687 ↗
60. Failure pressure and impact response of glass–epoxy pipes exposed to seawater
61. Effects of moisture absorption on degradation of E-glass fibre reinforced vinyl ester composite pipes and modelling of transient moisture diffusion using finite element analysis10.1016/j.corsci.2014.10.009 ↗
62. Long term environmental effects on physical properties of vinylester composite pipes10.1016/j.polymertesting.2011.10.001 ↗
63. ASTM D2992-06 · 2006
64. ASTM D5365-06 · 2006
65. ASTM D3681-06 · 2006
66. Tensile failure of filament-wound pipes under long-term creep loading: a probabilistic analysis10.1016/S0266-3538(97)00056-0 ↗
67. Effect of aqueous environment on the long-term behavior of glass fibre-reinforced plastic pipes10.1016/S0142-9418(03)00075-8 ↗
68. Strain corrosion of glass-fibre reinforced plastic pipes10.1016/j.polymertesting.2003.12.003 ↗
69. Equivalence of moisture and temperature in accelerated test method and its application in prediction of long-term properties of glass-fibre reinforced epoxy pipe specimen10.1016/j.polymertesting.2005.11.010 ↗
70. Influence of moisture absorption on creep of GRP composite pipes10.1016/j.polymertesting.2007.02.007 ↗
71. Faria H. Failure analysis of GRP pipes under compressive ring loads [M.Sc. thesis]. Faculdade de Engenharia da Universidade do Porto; 2005.
72. Nonlinear viscoelastic analysis of thick-walled cylindrical composite pipes10.1016/j.ijmecsci.2010.04.003 ↗
73. Prediction of long term performance for GRP pipes under sustained internal pressure10.1016/j.compstruct.2015.08.075 ↗
74. The ultimate elastic wall stress (UEWS) of wavistrong pipes
75. The use of the ultimate elastic wall stress (UEWS) in evaluating PVC polymer blends10.1002/vnl.730110108 ↗
76. Ultimate elastic wall stress (UEWS) test under biaxial loading for glass-fibre reinforced epoxy (GRE) pipes10.4028/www.scientific.net/AMR.974.188 ↗
77. Ultimate elastic wall stress (UEWS) test of glass fibre reinforced epoxy (GRE) pipe10.1016/j.compositesa.2011.07.001 ↗
78. Strain response and damage modelling of glass/epoxy pipes under various stress ratios10.1179/1743289814Y.0000000101 ↗
79. Acoustic emission monitoring of multiaxial ultimate elastic wall stress tests of glass fibre-reinforced epoxy composite pipes
80. General lifetime damage model for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial loading
81. Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass fibre reinforced epoxy (GRE) composite pipes10.4028/www.scientific.net/AMR.795.424 ↗
82. Long-term behaviour of GFRP pipes: reducing the prediction test duration10.1016/j.polymertesting.2009.12.008 ↗
83. Modelling creep in polymeric composites: developing a general integrated procedure10.1016/j.ijmecsci.2015.05.011 ↗
84. Simulation of the long-term hydrostatic tests on glass fibre reinforced plastic pipes10.1016/j.compstruct.2015.09.058 ↗
85. The effect of frequency on the fatigue performance of filament-wound pipes under biaxial loading: experimental results and damage model10.1016/S0266-3538(96)00155-8 ↗
86. Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure10.1016/j.compscitech.2004.10.002 ↗
87. The fatigue behavior of (±55°) filament wound GRP pipes with a surface crack under internal pressure10.1016/j.compstruct.2006.05.015 ↗
88. Fatigue failure analysis of surface-cracked (±45°)3 filament-wound GRP pipes under internal pressure10.1177/0021998311414945 ↗
89. Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure10.1007/s10853-008-2820-x ↗
90. Fatigue failure analysis of surface cracked (±45°) filament wound GRP pipes under internal pressure10.1177/0021998311414945 ↗
91. Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure10.1016/j.matdes.2009.04.025 ↗
92. Environmental effect on fatigue life of glass–epoxy composite pipes subjected to impact loading10.1016/j.compositesb.2012.05.001 ↗
93. Residual failure pressures and fatigue life of filament-wound composite pipes subjected to lateral impact10.1177/0021998311425717 ↗
94. Ageing effects on burst pressure test of impacted glass fibre reinforcement epoxy (GRE) pipes10.4028/www.scientific.net/AMM.695.717 ↗
95. Fatigue behavior of filament wound E-glass/epoxy composite tubes damaged by low velocity impact10.1016/j.compositesb.2013.06.039 ↗
96. Effects of winding angle on the behaviour of glass/epoxy pipes under multiaxial cyclic loading10.1016/j.matdes.2015.08.153 ↗
97. Low velocity transverse impact of filament wound pipes under static and low velocity impact condition
98. Failure mechanisms during transverse loading of filament-wound pipes under static and low velocity impact conditions10.1016/0263-8223(92)90010-A ↗
99. Detection of low-velocity impact damage in glass/epoxy tubes by penetrant method
100. Damage development in thick composite tubes under impact loading and influence on implosion pressure: experimental observations10.1016/j.compositesb.2004.11.004 ↗