Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures
Source abstract
Abstract
Abstract The bond between carbon fiber-reinforced polymer (CFRP) composites and steel is a key issue in CFRP-strengthened steel structures. The determination of key parameters in the bond strength model remains debatable. We studied the bond behavior between CFRP and steel, focusing on the effects of different types of epoxy adhesive and CFRP on the failure modes, bond–slip relationships, and bond strength parameters. The results show that due to the use of various materials, some specimens fail in interface debonding characterized by brittle failure, whereas others have cohesive failure or CFRP delamination characterized by ductile failure. The bond–slip models showed gentle-slope descending branches for interfaces with ductile failure, which is missing in brittle failure. The bond–slip relationships of most specimens can be simplified as bilinear models. However, trilinear models should be used for the specimens failing in the delamination and tearing of CFRP. As for the modes of interface debonding and CFRP superficial delamination, the maximum shear stresses in the interface linearly correlate with the elastic moduli of adhesive. The nonlinear mechanical behavior of interfaces can be well simulated by a cohesive zone model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A review on steel/CFRP strengthening systems focusing environmental performance10.1016/j.conbuildmat.2013.04.049 ↗
2. Environment-assisted degradation of the bond between steel and carbon-fiber-reinforced polymer10.1061/(ASCE)MT.1943-5533.0000951 ↗
3. Bond behavior of FRP carbon plates externally bonded over steel and concrete elements: experimental outcomes and numerical investigations10.1016/j.compositesb.2016.02.033 ↗
4. Evaluation on material behaviors of pultruded glass fiber reinforced polymer (GFRP) laminates10.1016/j.compstruct.2017.09.006 ↗
5. Flexural performance of a hybrid GFRP-concrete bridge deck with composite T-shaped perforated rib connectors10.1016/j.compstruct.2018.03.105 ↗
6. Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
7. Development of a simplified bond stress–slip model for bonded FRP–concrete interfaces10.1016/j.conbuildmat.2014.06.037 ↗
8. Repair of steel composite beams with carbon fiber-reinforced polymer plates10.1061/(ASCE)1090-0268(2004)8:2(163) ↗
9. Strengthening of steel structures with fiber-reinforced polymer composites10.1016/j.jcsr.2012.06.011 ↗
10. State-of-the-art review on FRP strengthened steel structures10.1016/j.engstruct.2006.10.006 ↗
11. Debonding of CFRP-to-steel joints with CFRP delamination10.1016/j.compstruct.2016.05.100 ↗
12. Xia · 2005 · 411
13. Effects of applied environmental conditions on the pull-out strengths of CFRP-concrete bond10.1016/j.conbuildmat.2016.03.195 ↗
14. Bond behaviour between CFRP laminates and steel members under different loading rates10.1016/j.compstruct.2016.04.002 ↗
15. Effect of CFRP properties, on the bond characteristics between steel and CFRP laminate under quasi-static loading10.1016/j.conbuildmat.2015.08.130 ↗
16. Bond–slip models for double strap joints strengthened by CFRP10.1016/j.compstruct.2009.09.042 ↗
17. Effect of FRP-to-steel bonded joint configuration on interfacial stresses: finite element investigation10.1016/j.tws.2012.07.020 ↗
18. Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads10.1016/j.compstruct.2011.08.018 ↗
19. Effect of fatigue loading on the bond behaviour between UHM CFRP plates and steel plates10.1016/j.compositesb.2013.02.040 ↗
20. Influence of freeze–thaw cycling on the bond strength of steel–FRP lap joints10.1016/j.compositesb.2013.12.024 ↗
21. Experimental investigation of bond between high-modulus CFRP and steel at moderately elevated temperatures10.1061/(ASCE)CC.1943-5614.0000702 ↗
22. Bond characteristics between ultra high modulus CFRP laminates and steel10.1016/j.tws.2011.10.010 ↗
23. Derivation of the bond–slip characteristics for FRP plated steel members10.1016/j.jcsr.2010.03.003 ↗
24. Fernando · 2010
25. Bond-slip models for CFRP plates externally bonded to steel substrates10.1016/j.compstruct.2017.10.033 ↗
26. ASTM D638-10, Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA; 2010.
27. ASTM D3165-00, Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies, ASTM International, West Conshohocken, PA; 2000.
28. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
29. Experimental study on CFRP-to-steel bonded interfaces10.1016/j.compositesb.2012.01.024 ↗
30. A concise interface constitutive law for analysis of delamination and splitting in composite materials and its application to scaled notched tensile specimens10.1002/nme.1842 ↗
31. Formulation and implementation of decohesion elements in an explicit finite element code10.1016/j.compositesa.2005.06.007 ↗