Bi-material microstructural design of chiral auxetic metamaterials using topology optimization
Source abstract
Abstract
Abstract This paper presents a new bi-material microstructural design method for chiral auxetic metamaterials . Based on the independent point-wise density interpolation (iPDI) and a bi-material model, optimal design problem of periodic unit cells is formulated using nodal density variables. The design objective is to minimize the Poisson’s ratio while satisfying the specified volume constraints of the hard and soft materials, and the effective elastic properties of the bi-material microstructure are computed by the asymptotic homogenization method under periodic boundary conditions. This topology optimization problem is solved with a gradient-based mathematical programming algorithm on the basis of the sensitivity analysis. Several numerical examples, regarding design of anisotropic , orthogonal anisotropic and isotropic bi-material microstructures of chiral auxetic metamaterials, are given to demonstrate the effectiveness of the method. It is shown that the proposed bi-material design optimization method can be used to improve the performance of chiral auxetic metamaterials through enlarging the design space.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Topology Optimization in Engineering · 3D Shape Modeling and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Foam structures with a negative Poisson's ratio10.1126/science.235.4792.1038 ↗
2. Three decades of auxetics research – materials with negative Poisson's ratio: a review10.1002/adem.201600053 ↗
3. Auxetic mechanical metamaterials. RSC
4. Auxetic oesophageal stents: structure and mechanical properties10.1007/s10856-013-5067-2 ↗
5. Auxetic materials for sports applications
6. The fracture toughness of composite laminates with a negative Poisson's ratio10.1002/pssb.200982031 ↗
7. Fracture toughness of re-entrant foam materials with a negative Poisson's ratio: experiment and analysis10.1007/BF00036481 ↗
8. In-plane dynamic crushing of re-entrant auxetic cellular structure10.1016/j.matdes.2016.03.086 ↗
9. Control of acoustic properties of network materials by finite pre-deformations: applications to 3D auxetic network materials10.1016/j.ijnonlinmec.2017.10.012 ↗
10. Francesco · 2018
11. Designing two-dimensional metamaterials of controlled static and dynamic properties10.1016/j.commatsci.2017.06.035 ↗
12. The bending and failure of sandwich structures with auxetic gradient cellular cores10.1016/j.compositesa.2013.02.007 ↗
13. Compliant hexagonal periodic lattice structures having both high shear strength and high shear strain10.1016/j.matdes.2010.08.029 ↗
14. Properties of a chiral honeycomb with a Poisson’s ratio of -110.1016/S0020-7403(96)00025-2 ↗
15. Designable dual-material auxetic metamaterials using three-dimensional printing10.1016/j.matdes.2014.11.033 ↗
16. Elastic properties of two novel auxetic 3D cellular structures10.1016/j.ijsolstr.2017.05.031 ↗
17. A novel chiral three-dimensional material with negative Poisson’s ratio and the equivalent elastic parameters10.1016/j.compstruct.2017.05.027 ↗
18. Three-dimensional mechanical metamaterials with a twist10.1126/science.aao4640 ↗
19. Interlocking assembled 3D auxetic cellular structures10.1016/j.matdes.2016.03.088 ↗
20. Three-dimensional bi-chiral photonic crystals10.1002/adma.200901601 ↗
21. Past Achievements and future challenges in 3D Photonic metamaterials10.1038/nphoton.2011.154 ↗
22. Controllable thermal expansion of large magnitude in chiral negative Poisson's ratio lattices10.1002/pssb.201552158 ↗
23. A level set method for structural topology optimization10.1016/S0045-7825(02)00559-5 ↗
24. Bendsøe · 2004
25. Giga-voxel computational morphogenesis for structural design10.1038/nature23911 ↗
26. Topology optimization in aircraft and aerospace structures design10.1007/s11831-015-9151-2 ↗
27. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review10.1016/j.biomaterials.2016.01.012 ↗
28. Topological shape optimization of microstructural metamaterials using a level set method10.1016/j.commatsci.2014.02.006 ↗
29. Materials with prescribed constitutive parameters – an Inverse homogenization problem10.1016/0020-7683(94)90154-6 ↗
30. Huang · 2010
31. Design of auxetic structures via mathematical optimization10.1002/adma.201004090 ↗
32. Design of manufacturable 3D extremal elastic microstructure10.1016/j.mechmat.2013.09.018 ↗
33. Design of materials using topology optimization and energy-based homogenization approach in Matlab10.1007/s00158-015-1294-0 ↗
34. Topology optimized architectures with programmable Poisson's ratio over large deformations10.1002/adma.201502485 ↗
35. Homogenized couple stress model of optimal auxetic microstructures computed by topology optimization
36. Topology optimization of multi-material negative Poisson’s ratio metamaterials using a reconciled level set method10.1016/j.cad.2016.09.009 ↗
37. Level-set topology optimization for multimaterial and multifunctional mechanical metamaterials10.1080/0305215X.2016.1164853 ↗
38. Buckling of regular, chiral and hierarchical honeycombs under a general macroscopic stress state10.1098/rspa.2013.0856 ↗
39. Evaluation of hexagonal chiral structure for morphing airfoil concept10.1243/095441005X30216 ↗
40. A nodal variable method of structural topology optimization based on Shepard interpolant10.1002/nme.3321 ↗
41. Adaptive topology optimization with independent error control for separated displacement and density fields10.1016/j.compstruc.2014.01.008 ↗
42. Structural topology optimization based on non-local Shepard interpolation of density field10.1016/j.cma.2011.09.001 ↗
43. Optimization of composite structures with continuous spatial variation of fiber angle through Shepard interpolation10.1016/j.compstruct.2017.09.052 ↗
44. A cascadic multilevel optimization algorithm for the design of composite structures with curvilinear fiber based on Shepard interpolation10.1016/j.compstruct.2018.01.013 ↗
45. Material interpolation schemes in topology optimization10.1007/s004190050248 ↗
46. Design of materials with extreme thermal expansion using a three-phase topology optimization method10.1016/S0022-5096(96)00114-7 ↗
47. Topological design of microstructures of cellular materials for maximum bulk or shear modulus10.1016/j.commatsci.2011.01.030 ↗
48. The method of moving asymptotes - a new method for structural optimization10.1002/nme.1620240207 ↗
49. Vasiliev · 2001
50. Design of a porous material with isotropic negative Poisson's ratio10.1016/j.mechmat.2016.02.012 ↗
51. Design of planar isotropic negative Poisson’s ratio structures10.1016/j.eml.2015.05.002 ↗