Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites
Source abstract
Abstract
Abstract Cementitious composites incorporated with CNT were developed in the present study as a self-heating element, and heating and heat-dependent mechanical characteristics of the composites were investigated. Silica fume and poly-carboxylic acid based superplasticizer were used as dispersion agents for the CNT particles to ensure a certain electrical resistivity value that is required to induce heat generation capability in the composites. The amount of CNT added to the composites and the input voltages were varied from 0.1 wt% to 2.0 wt% and from 3 V to 20 V, respectively. A cyclic self-heating test was conducted to investigate the stability in the heat generation capability and electrical resistivity of the composites. Moreover, compressive strength and TG/DTA tests were conducted to investigate the heat-dependent mechanical properties and the amount of hydration products of the cyclically heated composites. The test results showed that the heat generation capability of the CNT-embedded cementitious composites was improved with an increase in the amount of CNT and the composites having CNT less than 0.6 wt% is appropriate as a heating element.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Self-heating structural materials10.1088/0964-1726/13/3/015 ↗
2. Self-deicing road system with a CNFP high-efficiency thermal source and MWCNT/cement-based high-thermal conductive composites10.1016/j.coldregions.2012.10.007 ↗
3. Evaluation of electrically conductive concrete containing carbon products for deicing
4. Tuan CY. Conductive concrete for bridge deck deicing and anti-icing. Technical Report, Nebraska Department of Road, No. SPR-PL-1(037); 2004.
5. Negative temperature coefficient of resistivity in lightweight conductive carbon nanotube/polymer composites10.1002/mame.200800273 ↗
6. Zhang Q, Li H. Experimental investigation of road snow-melting based on CNFP self-heating concrete. In: Proceedings SPIE 7978, Behavior and Mechanics of Multifunctional Materials and Composites March 2011;7978:797825–797825-15.10.1117/12.879307 ↗
7. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume10.1016/j.compstruct.2013.07.042 ↗
8. Influence of silica fume additions on electromagnetic interference shielding effectiveness of multi-walled carbon nanotube/cement composites10.1016/j.conbuildmat.2011.11.025 ↗
9. Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites10.1016/j.cemconcomp.2006.05.004 ↗
10. Mechanical and thermal properties of carbon nanotubes10.1016/0008-6223(95)00021-5 ↗
11. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
12. Electronic properties of carbon nanotube10.1016/0009-2614(94)00421-8 ↗
13. Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns10.1016/j.compstruct.2015.08.108 ↗
14. A zinc oxide/polyurethane-based generator composite as a self-powered sensor for traffic flow monitoring10.1016/j.compstruct.2015.08.112 ↗
15. Wang G, Xiao H, Li H, Guan X. A scouring sensor by using the electrical properties of carbon nanotubes-filled cement-based composite. In: Proceedings SPIE 8692, sensors and smart structures technologies for civil, mechanical, and aerospace systems April 2013;8692:869239–869239-8.10.1117/12.2012023 ↗
16. Carbon nanotube composites for thermal management10.1063/1.1469696 ↗
17. A carbon nanotube/cement composite with piezoresistive properties10.1088/0964-1726/18/5/055010 ↗
18. Compressive strength, chloride permeability, and freeze-thaw resistance of MWNT concretes under different chemical treatments
19. Effect of carbon nanotube size on compressive strengths of nanotube reinforced cementitious composites10.1155/2014/960984 ↗
20. Environmental durability of externally bonded FRP materials intended for repair of concrete structures10.1016/j.conbuildmat.2010.11.096 ↗
21. Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water-binder ratio10.1016/j.compstruct.2014.06.007 ↗
22. Electrical resistance change in compact tension specimens of carbon fiber cement composites10.1016/j.cemconcomp.2003.06.002 ↗
23. Strain sensing of carbon fiber reinforced geopolymer concrete10.1617/s11527-011-9711-3 ↗
24. Lerner · 1997 · 732
25. American Society for Testing and Materials, ASTM C 109/C 109M · 2013
26. Moisture distribution during conventional or electrical resistance oven baking of bread dough and subsequent storage10.1021/jf501856s ↗
27. Resistance heating using electrically conductive cements10.1680/adcr.2004.16.4.161 ↗
28. Numerical investigation and experimental verification of the Joule heating effect of polyacrylonitrile-based carbon fiber tows under high vacuum conditions
29. Characterization of electrical and thermal properties of carbon nanotube/epoxy composites10.1016/j.compositesb.2013.08.032 ↗
30. Conductive concrete overlay for bridge deck deicing
31. Performances of electrically conductive concrete with layered stainless steel fibers
32. Positive temperature coefficient effect in multiwalled carbon nanotube/high-density polyethylene composites10.1063/1.1863452 ↗
33. The influence of crystalline and aggregate structure on PTC characteristics of conductive polyethylene/carbon black composites10.1016/S0014-3057(98)00099-8 ↗
34. Electro-induced mechanical and thermal responses of carbon nanotube fibers10.1002/adma.201305123 ↗
35. Coefficient of thermal expansion of cement paste and concrete: mechanisms of moisture interaction10.1617/s11527-006-9086-z ↗
36. Resistance of alkali-activated slag concrete to carbonation10.1016/S0008-8846(01)00574-9 ↗
37. Strength and durability recovery of fire-damaged concrete after post-fire-curing10.1016/S0008-8846(01)00582-8 ↗
38. Compressive strength of concrete at high temperatures: a reassessment10.1680/macr.1992.44.161.291 ↗
39. Parra-Montesinos · 2012 · 102
40. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗