On the use of in-situ piezoelectric sensors for the manufacturing and structural health monitoring of polymer-matrix composites: A literature review
Source abstract
Abstract
Abstract This article aims to provide a general overview of what has been achieved recently in the scientific community on the manufacturing monitoring and structural health monitoring of polymer-matrix composites (PMC) using in-situ piezoelectric sensors. Some industrial applications with the underlying issues and potential solutions will finally be discussed in the concluding section.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Recent trends in industrial and other engineering applications of non destructive testing: a review
2. New set-up for measurement of permeability properties of fibrous reinforcements for RTM10.1016/S1359-835X(02)00035-0 ↗
3. Three-dimensional reconstruction of resin flow using capacitance sensor data assimilation during a liquid composite molding process: a numerical study10.1016/j.compositesa.2015.01.031 ↗
4. Cross-sectional monitoring of resin impregnation using an area-sensor array in an RTM process10.1016/j.compositesa.2011.12.024 ↗
5. Multipoint cure monitoring of CFRP laminates using a flexible matrix sensor10.1016/j.compscitech.2008.10.029 ↗
6. Ultrasonic characterization of a fluid layer using a broadband transducer10.1016/j.ultras.2011.10.004 ↗
7. Ultrasound monitoring of the cure kinetics of an epoxy resin: Identification, frequency and temperature dependence10.1016/j.polymertesting.2016.10.009 ↗
8. Ultrasonic broadband characterization of a viscous liquid: methods and perturbation factors10.1016/j.ultras.2014.08.013 ↗
9. Ultrasound monitoring of bubble size and velocity in a fluid model using phased array transducer10.1016/j.ndteint.2011.06.005 ↗
10. Monitoring of an ascending air bubble in a viscous fluid/fiber matrix medium using a phased array transducer10.1016/j.euromechflu.2015.06.012 ↗
11. Ultrasonic monitoring of the dynamic properties of composites during manufacture
12. Garney · 2006
13. Subcritical damage mechanisms of bolted joints in CFRP composite laminates10.1016/j.compositesb.2013.04.071 ↗
14. X-ray radiography and micro-computed tomography examination of damage characteristics in stitched composites subjected to impact loading10.1016/j.compositesb.2011.01.011 ↗
15. Damage identification in aircraft composite structures: a case study using various non-destructive testing techniques10.1016/j.compstruct.2015.02.080 ↗
16. Progressive damage assessment of centrally notched composite specimens in fatigue10.1016/j.compositesa.2015.03.022 ↗
17. Non-contact detection of impact damage in CFRP composites using millimeter-wave reflection and considering carbon fiber direction10.1016/j.ndteint.2013.03.006 ↗
18. Effects of bending stresses on magnetic flux leakage patterns10.1016/0963-8695(93)90158-Q ↗
19. Huguet · 2002
20. Use of acoustic emission to identify damage modes in glass fibre reinforced polyester10.1016/S0266-3538(02)00087-8 ↗
21. Damage characterization of polymer-based composite materials: Multivariable analysis and wavelet transform for clustering acoustic emission data10.1016/j.ymssp.2007.11.029 ↗
22. Foulon · 2016
23. Evaluation of polypropylene based composites from thermal effects developing under cyclic bending tests10.1016/j.compstruct.2017.09.066 ↗
24. Mechanical damage assessment of Glass Fiber-Reinforced Polymer composites using passive infrared thermography10.1016/j.compositesb.2013.11.021 ↗
25. Non-destructive evaluation of aerospace materials with lock-in thermography10.1016/j.engfailanal.2005.02.007 ↗
26. Theory and validation of optical transmission scanning for quantitative NDE of impact damage in GFRP composites10.1016/j.compositesb.2016.09.081 ↗
27. Quantitative comparison of optical transmission scanning with conventional techniques for NDE of impact damage in GFRP composites10.1016/j.compositesb.2017.05.008 ↗
28. Damage investigation in CFRP composites using full-field measurement techniques: Combination of digital image stereo-correlation, infrared thermography and X-ray tomography10.1016/j.compositesb.2012.11.016 ↗
29. Full-field strain measurements for validation of meso-FE analysis of textile composites10.1016/j.compositesa.2007.09.011 ↗
30. Ultrasonic C-Scan and shearography NDI techniques evaluation of impact defects identification10.1016/j.ndteint.2005.07.012 ↗
31. Inspection of defects of composite materials in inner cylindrical surfaces using endoscopic shearography
32. Non-destructive evaluation (NDE) of composites: digital shearography
33. Location of delamination in laminated composite plates by pulsed laser holography10.1016/j.optlaseng.2008.10.003 ↗
34. Detection of defects in composite materials by TV holography
35. Assessment of NDT interferometric techniques for impact damage detection in composite laminates10.1016/j.compscitech.2005.04.027 ↗
36. Manipulation of speckle fringes for non-destructive testing of defects in composites10.1016/0030-3992(94)90082-5 ↗
37. Identification of subsurface delaminations in composite laminates10.1016/j.compscitech.2007.01.032 ↗
38. Optical coherence tomography of glass reinforced polymer composites10.1016/S1359-835X(98)00084-0 ↗
39. 3D monitoring of delamination growth in a wind turbine blade composite using optical coherence tomography10.1016/j.ndteint.2014.03.003 ↗
40. Use of a surface-mounted chirped fibre Bragg grating sensor to monitor delamination growth in a double-cantilever beam test10.1016/j.compscitech.2012.01.022 ↗
41. Response of fiber Bragg gratings bonded on a glass/epoxy laminate subjected to static loadings10.1016/j.compstruct.2015.04.015 ↗
42. Ultrasonic guided waves for health monitoring of high-pressure composite tanks10.1016/j.ndteint.2008.03.010 ↗
43. Mechanical damage characterization of glass fiber-reinforced polymer laminates by ultrasonic maps10.1016/j.compositesb.2014.11.014 ↗
44. Polarization-resolved terahertz imaging of intra- A nd inter-laminar damages in hybrid fiber-reinforced composite laminate subject to low-velocity impact10.1016/j.compositesb.2016.02.016 ↗
45. Acousto-ultrasonic evaluation of adhesively bonded CFRP-aluminum joints10.1016/S0963-8695(98)00066-8 ↗
46. Scheerer M, Cardone T, Rapisarda A, Ottaviano S, Francesconi D. “Online damage detection on metal and composite space structures by active and passive acoustic methods,” 2012, no. July.
47. Impedance based detection of delamination in composite structures
48. Application of electrical impedance tomography to an anisotropic carbon fi ber-reinforced polymer composite laminate for damage localization10.1016/j.compscitech.2018.03.031 ↗
49. Eddy current nondestructive testing for carbon fiber – Reinforced Composites10.1115/1.4023253 ↗
50. Vibration based structural health monitoring of a composite T-beam10.1016/j.compstruct.2009.12.007 ↗
51. Vibration-based assessment of delaminations in FRP composite plates10.1016/j.compositesb.2018.03.003 ↗
52. Monitoring cure and detecting damage in composites with inductively coupled embedded sensors10.1016/j.compscitech.2016.07.028 ↗
53. Mechanical behaviour and identification of damage by acoustic emission of smart composites10.1108/MMMS-11-2012-0023 ↗
54. Use of piezoelectric as acoustic emission sensor for in situ monitoring of composite structures10.1016/j.compositesb.2015.06.003 ↗
55. Effect of piezoelectric implant on the structural integrity of composite laminates subjected to tensile loads
56. Fatigue behaviour and structural health monitoring by acoustic emission of E-glass/epoxy laminates with piezoelectric implant10.1016/j.apacoust.2015.10.024 ↗
57. Structural integrity of laminated composite with embedded piezoelectric sensors
58. Mechanical behavior and health monitoring by acoustic emission of unidirectional and cross-ply laminates integrated by piezoelectric implant10.1016/j.apacoust.2014.04.011 ↗
59. Masmoudi · 2013
60. Mechanical behaviour and health monitoring by acoustic emission of sandwich composite integrated by piezoelectric implant10.1016/j.compositesb.2014.05.032 ↗
61. Cure monitoring and residual stress sensing of single-carbon fiber reinforced epoxy composites using electrical resistivity measurement10.1016/j.compscitech.2004.09.019 ↗
62. Real-time cure behaviour monitoring of polymer composites using a highly flexible and sensitive CNT buckypaper sensor10.1016/j.compscitech.2017.09.025 ↗
63. Design fabrication and embedding of microscale interdigital sensors for real-time cure monitoring during composite manufacturing10.1016/j.sna.2016.03.017 ↗
64. Mounkaila · 2016
65. Development of a measuring system for on-line in situ monitoring of composite materials manufacturing10.1016/j.compositesa.2016.09.006 ↗
66. Monitoring of epoxy/graphite composites using a scaling analysis and a dual heat flux sensor on-line cure
67. Acoustic emission technique for monitoring the pyrolysis of composites for process control10.1016/j.ultras.2007.08.007 ↗
68. Fiber-optic composite cure sensor: monitoring the curing process of composite material based on intensity modulation10.1016/S0266-3538(03)00118-0 ↗
69. Early damage detection in composites by distributed strain and acoustic event monitoring10.1016/j.proeng.2017.04.515 ↗
70. Liquid resin infusion process monitoring with superimposed Fibre Bragg Grating sensor10.1016/j.polymertesting.2012.07.018 ↗
71. Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites10.1016/j.compositesa.2010.11.013 ↗
72. Electrical impedance spectroscopy for measuring the impedance response of carbon-fiber-reinforced polymer composite laminates10.1016/j.compstruct.2017.02.075 ↗
73. Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method10.1016/S0266-3538(02)00013-1 ↗
74. A comparative investigation of electrical resistance and acoustic emission during cyclic loading of CFRP laminates10.1016/S0266-3538(00)00179-2 ↗
75. Electrical-based delamination crack monitoring in composites using z-pins
76. A technique for real-time detection, location and quantification of damage in large polymer composite structures made of electrically non-conductive fibers and carbon nanotube networks10.1088/0957-4484/24/45/455502 ↗
77. Improvement of the electrical conductivity of carbon fiber reinforced polymer by incorporation of nanofillers and the resulting thermal and mechanical behavior
78. Novel carbon nanotube interlaminar film sensors for carbon fiber composites under uniaxial fatigue loading10.1016/j.compstruct.2018.01.033 ↗
79. Structural health monitoring of glass fiber reinforced composites using embedded carbon nanotube (CNT) fibers10.1016/j.compscitech.2009.10.017 ↗
80. Comparative study on monitoring structural damage in fiber-reinforced polymers using glass fibers with carbon nanotubes and graphene coating10.1016/j.compscitech.2016.04.012 ↗
81. On the detectability of transverse cracks in laminated composites using electrical potential change measurements10.1016/j.compstruct.2014.11.008 ↗
82. Impact damage detection of a carbon-fibre-reinforced-polymer plate employing self-sensing time-domain reflectometry10.1016/j.compstruct.2015.04.020 ↗
83. On the improvement of strain measurements with FBG sensors embedded in unidirectional composites10.1016/j.polymertesting.2012.09.010 ↗
84. Modifications to FBG sensor spectra due to matrix cracking in a GFRP composite10.1016/j.conbuildmat.2005.06.046 ↗
85. “Piezoelectricity.” [Online]. Available: https://www.americanpiezo.com/knowledge-center/piezo-theory/piezoelectricity.html.
86. “PI Piezo Technology.” [Online]. Available: https://www.piceramic.com/en/.
87. “NDT Resource Center.” [Online]. Available: https://www.nde-ed.org/index_flash.htm.
88. A piezoelectric vibration based generator for wireless electronics10.1088/0964-1726/13/5/018 ↗
89. Use of PVDF as acoustic emission sensor for in situ monitoring of mechanical behaviour of glass/epoxy laminates10.1016/j.polymertesting.2010.04.006 ↗
90. Monitoring of impacted aramid-reinforced composites by embedded PVDF acoustic emission sensors10.1111/j.1475-1305.2007.00374.x ↗
91. Investigation of pencil-lead breaks as acoustic emission sources
92. Nondestructive damage detection and interfacial evaluation of single-fibers/epoxy composites using PZT, PVDF and P(VDF-TrFE) copolymer sensors10.1016/j.compscitech.2004.07.006 ↗
93. Built-in sensor network for structural health monitoring of composite structure10.1177/1045389X06064353 ↗
94. Smart layer and smart suitcase for structural health monitoring applications10.1117/12.429646 ↗
95. The manufacture of composite structures with a built-in network of piezoceramics10.1016/S0266-3538(02)00007-6 ↗
96. Composite structures with built-in diagnostics10.1016/S1369-7021(99)80007-8 ↗
97. Wang · 2003
98. Advances in the development of built-in diagnostic system for filament wound composite structures10.1016/j.compscitech.2005.11.007 ↗
99. An automatic impact monitor for a composite panel employing smart sensor technology10.1088/0964-1726/14/1/027 ↗
100. Localizing impact damage of composite structures with modified RAPID algorithm and non-circular PZT arrays10.1016/j.acme.2016.09.005 ↗