Static analysis of completely doubly-curved laminated shells and panels using general higher-order shear deformation theories
Source abstract
Abstract
Abstract This paper investigates the static analysis of doubly-curved laminated composite shells and panels. A theoretical formulation of 2D Higher-order Shear Deformation Theory (HSDT) is developed. The middle surface of shells and panels is described by means of the differential geometry tool. The adopted HSDT is based on a generalized nine-parameter kinematic hypothesis suitable to represent, in a unified form, most of the displacement fields already presented in literature. A three-dimensional stress recovery procedure based on the equilibrium equations will be shown. Strains and stresses are corrected after the recovery to satisfy the top and bottom boundary conditions of the laminated composite shell or panel. The numerical problems connected with the static analysis of doubly-curved shells and panels are solved using the Generalized Differential Quadrature (GDQ) technique. All displacements, strains and stresses are worked out and plotted through the thickness of the following six types of laminated shell structures: rectangular and annular plates, cylindrical and spherical panels as well as a catenoidal shell and an elliptic paraboloid. Several lamination schemes, loadings and boundary conditions are considered. The GDQ results are compared with those obtained in literature with semi-analytical methods and the ones computed by using the finite element method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Structural Analysis and Optimization · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (99)
Show source-provided references
1. Timoshenko · 1959
2. Flügge · 1960
3. Gol’Denveizer · 1961
4. Novozhilov · 1964
5. Vlasov VZ. General theory of shells and its application in engineering. NASA-TT-F-99; 1964.
6. Ambartusumyan SA. Theory of anisotropic shells. NASA-TT-F-118; 1964.
7. Kraus · 1967
8. Leissa AW. Vibration of plates. NASA-SP-160; 1969.
9. Leissa AW. Vibration of shells. NASA-SP-288; 1973.
10. Markuš · 1988
11. Ventsel · 2001
12. Soedel · 2004
13. On transverse bending of plates, including the effect of transverse shear deformation10.1016/0020-7683(75)90030-X ↗
14. Gould · 1984
15. Gould · 1999
16. Reddy · 2003
17. Qatu · 2004
18. Carrera · 2011
19. Historical review of zig-zag theories for multilayered plates and shells10.1115/1.1557614 ↗
20. Multilayered shell theories accounting for layerwise mixed description, Part 1: Governing equations10.2514/2.821 ↗
21. Multilayered shell theories accounting for layerwise mixed description, Part 2: Numerical evaluations10.2514/2.822 ↗
22. Static and vibration analyses of thick deep laminated cylindrical shells using 3D and various shear deformation theories10.1016/j.compstruct.2011.08.011 ↗
23. Exact characteristic equations for free vibrations of thin orthotropic circular cylindrical shells10.1016/j.compstruct.2011.08.012 ↗
24. Recent research advances on the dynamic analysis of composite shells: 2000–200910.1016/j.compstruct.2010.05.014 ↗
25. Shu · 2000
26. Differential quadrature method in computational mechanics10.1115/1.3101882 ↗
27. Free vibration analysis of composites cylindrical shells by DQM10.1016/S1359-8368(96)00052-2 ↗
28. Differential quadrature element method: a new approach for free vibration of polar Mindlin plates having discontinuities10.1016/S0045-7825(99)00049-3 ↗
29. Vibration analysis of damaged circular arches with varying cross-section
30. Vibration analysis of conical shell structures using GDQ method
31. Tornabene F. Modellazione e Soluzione di Strutture a Guscio in Materiale Anisotropo. PhD thesis, University of Bologna-DISTART Department; 2007.
32. Vibration analysis of spherical structural elements using the GDQ method10.1016/j.camwa.2006.03.039 ↗
33. Analytical and numerical results for vibration analysis of multi-stepped and multi-damaged circular arches10.1016/j.jsv.2006.07.001 ↗
34. Nonconservative stability problems via generalized differential quadrature method10.1016/j.jsv.2008.01.056 ↗
35. 2-D solution for free vibrations of parabolic shells using generalized differential quadrature method10.1016/j.euromechsol.2007.12.007 ↗
36. Static analysis of cross-ply laminated plates with integrated surface piezoelectric layers using differential quadrature10.1016/j.compstruct.2008.04.018 ↗
37. Vibration analysis of functionally graded conical, cylindrical and annular shell structures with a four-parameter power-law distribution10.1016/j.cma.2009.04.011 ↗
38. Free vibrations of four-parameter functionally graded parabolic panels and shell of revolution10.1016/j.euromechsol.2009.04.005 ↗
39. Free vibration analysis of functionally graded panels and shells of revolution10.1007/s11012-008-9167-x ↗
40. 2-D differential quadrature solution for vibration analysis of functionally graded conical, cylindrical and annular shell structures10.1016/j.jsv.2009.07.031 ↗
41. Free vibrations of three parameter functionally graded parabolic panels of revolution10.1016/j.mechrescom.2009.02.001 ↗
42. Static analysis of functionally graded cylindrical shell with piezoelectric layers using differential quadrature method10.1016/j.compstruct.2010.02.004 ↗
43. Non-linear bending analysis of laminated sector plates using generalized differential quadrature10.1016/j.compstruct.2009.08.007 ↗
44. Large deflection analysis of thermo-mechanical loaded annular FGM plates on nonlinear elastic foundation via DQM10.1016/j.compstruct.2010.03.011 ↗
45. Critical flow speeds of pipes conveying fluid by the generalized differential quadrature method
46. Three-dimensional analysis for thermoelastic response of functionally graded fiber reinforced cylindrical panel10.1016/j.compstruct.2010.03.008 ↗
47. 2-D GDQ solution for free vibrations of anisotropic doubly-curved shells and panels of revolution10.1016/j.compstruct.2011.02.006 ↗
48. Free vibrations of anisotropic doubly-curved shells and panels of revolution with a free-form meridian resting on Winkler–Pasternak elastic foundations10.1016/j.compstruct.2011.07.002 ↗
49. FGM and laminated doubly-curved shells and panels of revolution with a free-form meridian: a 2-D GDQ solution for free vibrations10.1016/j.ijmecsci.2011.03.007 ↗
50. Free vibration analysis of functionally graded conical shell panels by a meshless method10.1016/j.compstruct.2010.08.014 ↗
51. Laminated composite rectangular and annular plates: a GDQ solution for static analysis with a posteriori shear and normal stress recovery10.1016/j.compositesb.2012.01.065 ↗
52. Static analysis of laminated composite curved shells and panels of revolution with a posteriori shear and normal stress recovery using generalized differential quadrature method10.1016/j.ijmecsci.2012.05.007 ↗
53. General anisotropic doubly-curved shell theory: a differential quadrature solution for free vibrations of shells and panels of revolution with a free-form meridian10.1016/j.jsv.2012.05.036 ↗
54. Numerical investigation of functionally graded cylindrical shells and panels using the generalized unconstrained third order theory coupled with the stress recovery10.1016/j.compstruct.2012.05.034 ↗
55. Tornabene F. Meccanica delle Strutture a Guscio in Materiale Composito. Il Metodo Generalizzato di Quadratura Differenziale, Esculapio; 2012.10.15651/978-88-748-8527-5 ↗
56. General higher-order shear deformation theories for the free vibration analysis of completely doubly-curved laminated shells and panels10.1016/j.compstruct.2012.08.005 ↗
57. Tornabene F, Viola E. Static analysis of functionally graded doubly-curved shells and panels of revolution. Meccanica 2012. doi:http://dx.doi.org/10.1007/s11012-012-9643-1.10.1007/s11012-012-9643-1 ↗
58. Memoire sur la theorie des plaques elastique planes
59. On theory of bending plates
60. Kaczkowski Z. Plates. In: Statical calculations, Arkady, Warsaw; 1968.
61. Panc V. Theories of elastic plates. Academia, Prague; 1975.10.1007/978-94-010-1906-4 ↗
62. An accurate simple theory of the statics and dynamics of elastic plates10.1016/0093-6413(80)90049-X ↗
63. Murthy MV. An improved transverse shear deformation theory for laminated anisotropic plates. NASA technical paper 1903; 1981.
64. A higher-order shear deformation theory of laminated elastic shells10.1016/0020-7225(85)90051-5 ↗
65. Reddy JN. A refined shear deformation theory for the analysis of laminated plates. NASA contractor report 3955; 1986.
66. Nonlinear theory for plates and shells including the effect of transverse sharing10.2514/3.9477 ↗
67. An efficient standard plate theory10.1016/0020-7225(91)90165-Y ↗
68. A transverse shear deformation theory for homogeneous monoclinic plates10.1007/BF01176650 ↗
69. Comparison of various laminated plate theories10.1016/S0263-8223(97)80010-4 ↗
70. Bending, buckling and free vibration of laminated composite with a transverse shear stress continuity model10.1016/S1359-8368(97)00024-3 ↗
71. On the stress analysis of cross-ply laminated plates and shallow shell panels10.1016/S0263-8223(99)00061-6 ↗
72. Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity10.1016/S0020-7683(02)00647-9 ↗
73. A new unconstrained third-order plate theory for Navier solutions of symmetrically laminated plates10.1016/S0045-7949(03)00290-6 ↗
74. Analysis of composite plates by trigonometric shear deformation theory and multiquadrics10.1016/j.compstruc.2005.04.002 ↗
75. Comparison of various deformation theories for bending, buckling, and vibration of rectangular symmetric cross-ply plate with simply supported edges10.1177/0021998306062313 ↗
76. A new simple third-order shear deformation theory of plates10.1016/j.ijsolstr.2006.11.031 ↗
77. Buckling and free vibration analyses of laminated composite plates by using two new hyperbolic shear-deformation theories10.1007/s11029-008-9004-2 ↗
78. A refinement of Ambartsumian multi-layer beam theory10.1016/j.compstruc.2007.04.011 ↗
79. A new shear deformation theory for laminated composite plates10.1016/j.compstruct.2008.07.008 ↗
80. Analysis of isotropic, sandwich plates by a meshless method and various shear deformation theories10.1016/j.compstruct.2009.04.029 ↗
81. Free vibration analysis of symmetric laminated composite plates by trigonometric shear deformation theory and inverse multiquadric RBF10.1016/j.tws.2008.07.007 ↗
82. Two new hyperbolic shear displacement models for orthotropic laminated composite plates10.1007/s11029-010-9140-3 ↗
83. Free vibration of laminated composite plates using two variable refined plate theory10.1016/j.ijmecsci.2010.01.002 ↗
84. Analysis of laminated shells by a sinusoidal shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations10.1016/j.compositesb.2011.01.031 ↗
85. A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate10.1016/j.ijmecsci.2011.01.004 ↗
86. A nth-order meshless generalization of Reddy’s third-order shear deformation theory for the free vibration on laminated composite plates10.1016/j.compstruct.2010.09.015 ↗
87. Static and dynamic analysis of laminated composite and sandwich plates and shells by using a new higher-order shear deformation theory10.1016/j.compstruct.2011.07.020 ↗
88. Comparison of various shear deformation theories for the free vibration of thick isotropic beams
89. Analysis of isotropic and multilayered plates and shells by using a generalized higher-order shear deformation theory10.1016/j.compstruct.2012.03.018 ↗
90. A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates10.1016/j.compstruct.2011.12.005 ↗
91. A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates10.1016/j.ijsolstr.2011.09.008 ↗
92. A new higher order shear deformation theory for sandwich and composite laminated plates10.1016/j.compositesb.2011.07.017 ↗
93. A novel higher-order shear deformation theory with stretching effect for functionally graded plates
94. Analysis of laminated composite plates using higher-order shear deformation plate theory and node-based smoothed discrete shear gap method10.1016/j.apm.2012.01.003 ↗
95. A refined shear deformation theory for free vibration of functionally graded plates on elastic foundation10.1016/j.compositesb.2011.11.062 ↗
96. Bending and free vibration of functionally graded beams using various higher-order shear deformation beam theories10.1016/j.ijmecsci.2012.05.014 ↗
97. Thai H-T, Park T, Choi D-H. An efficient shear deformation theory for vibration of functionally graded plates. Arch Appl Mech 2012. doi:http://dx.doi.org/10.1007/s00419-012-0642-4.10.1007/s00419-012-0642-4 ↗
98. Bending and free vibration analysis of isotropic and multilayered plates and shells by using a new accurate higher-order shear deformation theory10.1016/j.compositesb.2012.01.062 ↗
99. Free vibration analysis of functionally graded shells by a higher-order shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations10.1016/j.euromechsol.2012.05.005 ↗