Large deformation of an auxetic structure in tension: Experiments and finite element analysis
Source abstract
Abstract
Abstract The present paper reports on the post-yield behaviors of an auxetic structure, honeycomb with representative re-entrant topology. Specimens were made of stainless steel and polymer, respectively. Quasi-static uniaxial tensile tests were conducted in the two principal directions, followed by simulations using the commercial code – ABAQUS 6.11-2. The deformation, tensile stress-strain curves and Poisson’s ratio were of interest. A good agreement was observed between the numerical simulations and the experimental results. Subsequently, the effect of cell wall thickness and initial cell angle was studied by means of finite element analysis. An analytical equation was also given for the yield stress of such materials under tension.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Automotive and Human Injury Biomechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Auxetic materials10.1243/09544100JAERO185 ↗
2. Three decades of auxetic polymers: a review10.1515/epoly-2014-0193 ↗
3. Molecular network design10.1038/353124a0 ↗
4. Auxetic polymers – a new range of materials10.1016/0160-9327(91)90123-S ↗
5. Foam structures with a negative Poisson’s ratio10.1126/science.235.4792.1038 ↗
6. Negative Poisson’s ratio materials10.1126/science.238.4826.551 ↗
7. Stretching the point10.1126/science.247.4943.630 ↗
8. Non-linear properties of metallic cellular materials with a negative Poisson’s ratio10.1007/BF02403846 ↗
9. Negative Poisson’s ratio polymeric and metallic foams10.1007/BF00551939 ↗
10. The mechanical properties of conventional and auxetic foams. Part I: compression and tension10.1177/0021955X9903500204 ↗
11. Auxetic compliant flexible PU foams: static and dynamic properties10.1002/pssb.200460386 ↗
12. Auxetic materials and their potential applications in textiles10.1177/0040517512449051 ↗
13. Wave propagation in 3D viscoelastic auxetic and textile materials by homogenized continuum micropolar models10.1016/j.compstruct.2016.01.071 ↗
14. The fabrication and mechanical properties of a novel 3-component auxetic structure for composites10.1016/j.compscitech.2015.06.012 ↗
15. A negative Poisson’s ratio carbon fibre composite using a negative Poisson’s ratio yarn reinforcement10.1016/j.compscitech.2012.01.025 ↗
16. Developing a new processing route to manufacture honeycomb ceramics with negative Poisson’s ratio10.4028/www.scientific.net/KEM.206-213.201 ↗
17. A novel process for the manufacture of auxetic foams and for their re-conversion to conventional form10.1002/adem.200800388 ↗
18. Density change during the manufacturing process of PU–PE open cell auxetic foams10.1002/pssb.201083966 ↗
19. A review of the manufacture, mechanical properties and potential applications of auxetic foams10.1002/pssb.201248550 ↗
20. Making negative Poisson’s ratio microstructures by soft lithography10.1002/(SICI)1521-4095(199910)11:14<1186::AID-ADMA1186>3.0.CO;2-K ↗
21. The development of TiNi-based negative Poisson’s ratio structure using selective laser melting10.1016/j.actamat.2015.12.017 ↗
22. Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure10.1007/s10853-012-6892-2 ↗
23. Fabrication and deformation of three-dimensional hollow ceramic nanostructures10.1038/nmat3738 ↗
24. Flexible metasurfaces and metamaterials: a review of materials and fabrication processes at micro-and nano-scales10.1063/1.4913751 ↗
25. On the design of 1–3 piezocomposites using topology optimization10.1557/JMR.1998.0145 ↗
26. Elastic metamaterials making use of chirality: a review10.5545/sv-jme.2016.3799 ↗
27. On the potential of connected stars as auxetic systems10.1080/08927020500401139 ↗
28. Negative Poisson’s ratios in composites with star-shaped inclusions: a numerical homogenization approach10.1007/s004190050117 ↗
29. Design and fabrication of compliant micromechanisms and structures with negative Poisson’s ratio10.1109/84.585787 ↗
30. 3D Soft metamaterials with negative Poisson’s ratio10.1002/adma.201301986 ↗
31. Piezomorphic materials10.1002/mame.201200028 ↗
32. Poisson’s ratio and modern materials10.1038/nmat3134 ↗
33. Negative poisson’s ratio in single-layer black phosphorus10.1038/ncomms5727 ↗
34. Design of a fastener based on negative Poisson’s ratio foam10.1177/026248939101000302 ↗
35. Hierarchical fibers with a negative Poisson’s ratio for tougher composites10.3390/ma6020699 ↗
36. Auxetic materials for bioprostheses10.1109/MSP.2008.926663 ↗
37. The effect of negative Poisson’s ratio polyurethane scaffolds for articular cartilage tissue engineering applications
38. Review on auxetic materials10.1023/B:JMSC.0000026928.93231.e0 ↗
39. Microstructural modelling of auxetic microporous polymers10.1007/BF00349875 ↗
40. Properties of a chiral honeycomb with a Poisson’s ratio of -110.1016/S0020-7403(96)00025-2 ↗
41. A novel concept to develop composite structures with isotropic negative Poisson’s ratio: effects of random inclusions10.1016/j.compscitech.2012.07.020 ↗
42. The mechanical properties of conventional and auxetic foams. Part II: shear10.1177/0021955X9903500205 ↗
43. Corrosion behavior and the weak-magnetic-field effect of aluminum packaging paper10.17222/mit.2014.083 ↗
44. Low-kinetic energy impact response of auxetic and conventional open-cell polyurethane foams10.1002/pssb.201451715 ↗
45. Auxetic composites made of 3D textile structure and polyurethane foam10.1002/pssb.201670544 ↗
46. Numerical investigation on dynamic crushing behavior of auxetic honeycombs with various cell-wall angles
47. A numerical study of auxetic composite panels under blast loadings10.1016/j.compstruct.2015.09.038 ↗
48. The in-plane linear elastic constants and out-of-plane bending of 3-coordinated ligament and cylinder-ligament honeycombs10.1016/j.compscitech.2009.07.010 ↗
49. Gibson · 1999
50. On crushing response of the three-dimensional closed-cell foam based on Voronoi model10.1016/j.mechmat.2013.08.009 ↗
51. In-plane dynamic crushing of honeycombs-a finite element study10.1016/S0734-743X(02)00056-8 ↗
52. A non-quadratic yield function for polymeric foams10.1016/j.ijplas.2005.03.011 ↗
53. Isotropic constitutive models for metallic foams10.1016/S0022-5096(99)00082-4 ↗
54. Park WS, Lee SH, Cho HS, Leu MC. Evaluating the contributions of process parameters in SLA using artificial neural network. Intelligent Manufacturing Systems. 1997;IMS’97:189–94.10.1016/S1474-6670(17)42719-4 ↗