Response of ultra-high-performance fiber-reinforced concrete beams with continuous steel reinforcement subjected to low-velocity impact loading
Source abstract
Abstract
Abstract To investigate the effect of the reinforcement ratio on the flexural behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) beams under impact loading, a total of four large-sized (200 × 270 × 2900 mm) beams were fabricated and tested using a drop-weight impact test machine. The incident kinetic energy and impact velocity were 4.2 kJ and 5.6 m/s, respectively. A higher reinforcement ratio exhibited lower maximum and residual deflections and better deflection recovery. The test results also indicate that the maximum crack width at a certain drop stage decreased with the reinforcement ratio. A nonlinear analytical model for predicting the impact behavior of a UHPFRC beam was developed using multi-layer sectional analysis and single-degree-of-freedom analysis, and the model was verified through comparison with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Structural Behavior of Reinforced Concrete · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Yoo DY. Performance enhancement of ultra-high-performance fiber-reinforced concrete and model development for practical utilization [Ph.D. thesis]. Seoul, Korea: Korea University; 2014, 586 pp.
2. Study on impact response of reactive powder concrete beam and its analytical model10.3151/jact.4.99 ↗
3. Effects of strain rate on tensile behavior of reactive powder concrete10.3151/jact.4.79 ↗
4. Impact response of reinforced concrete beam and its analytical evaluation10.1061/(ASCE)ST.1943-541X.0000039 ↗
5. Response of ultra-high-performance fiber reinforced concrete (UHPFRC) to impact and static loading10.1016/j.cemconcomp.2008.09.001 ↗
6. Structural behavior of ultra high performance concrete beams subjected to bending10.1016/j.engstruct.2010.07.017 ↗
7. Flexural behavior of an ultrahigh-performance concrete I-girder10.1061/(ASCE)1084-0702(2008)13:6(602) ↗
8. Manfred T, Jens G. Bending design of steel-strengthened UHPC. In: Proceedings of 2nd international symposium on ultra high performance concrete, Kassel, Germany; 2008. p. 523–32.
9. Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites10.1016/j.compstruct.2013.07.033 ↗
10. ASTM C 39/39M. Standard test method for compressive strength of cylindrical concrete specimens. ASTM International, West Conshohocken, PA; 2014. p. 1–7.
11. Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution10.1016/j.conbuildmat.2011.07.003 ↗
12. Saatcı S. Behaviour and modelling of reinforced concrete structures subjected to impact loads [Ph.D. thesis]. University of Toronto: Toronto, ON, Canada; 2007. 288 pp.
13. Behavior of steel fiber-reinforced concrete slabs under impact load10.14359/51686923 ↗
14. ASTM C 469M. Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. ASTM International: West Conshohocken, PA; 2010. p. 1–5.
15. Effect of shrinkage reducing admixture on tensile and flexural behaviors of UHPFRC considering fiber distribution characteristics10.1016/j.cemconres.2013.09.006 ↗
16. Blast loading and blast effects on structures – An overview10.56748/ejse.671 ↗
17. Using acoustic emission to quantify damage in restrained fiber-reinforced cement mortars10.1016/S0008-8846(02)00978-X ↗
18. Influence of ring size on the restrained shrinkage behavior of ultra high performance fiber reinforced concrete10.1617/s11527-013-0119-0 ↗
19. Effects of shear mechanisms on impact behavior of reinforced concrete beams
20. Takeda J, Tachikawa H, Fujimoto K. Effects of straining rate on deformation and fracture of reinforced concrete members. In Proceeding of sixth world conference on earthquake engineering, New Delhi, India; 1977.
21. Review of effects of loading rate on reinforced concrete10.1061/(ASCE)0733-9445(1991)117:12(3660) ↗
22. Polymer and steel fiber-reinforced cementitious composites under impact loading – Part 2: Flexural toughness
23. Mixed-mode fracture of concrete subjected to impact loading10.1061/(ASCE)0733-9445(1990)116:3(585) ↗
24. Dynamic properties of steel fiber reinforced mortar under high-rates of loadings and triaxial stress states
25. Impact resistance of fiber reinforced wet-mix shotcrete part 1: Beam tests10.1007/BF02480490 ↗
26. Compressive strength and ultimate strain of concrete under impact loading10.1680/macr.1978.30.105.189 ↗
27. Impact response of ultra-high-strength fiber-reinforced cement composite
28. Nonlinear analysis for reactive powder concrete beams under rapid flexural loadings10.3151/jact.4.85 ↗
29. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
30. Fracture parameters by polylinear tension-softening analysis10.1061/(ASCE)0733-9399(1997)123:5(444) ↗
31. AFGC (Association Française du Génil Civil). “Bétons Fibrés à Ultra-hautes Performances,” Association Française du Génil Civil (AFGC), SETRA, France; 2002.
32. Flexural response predictions for ultra-high-performance fibre reinforced concrete beams10.1680/macr.10.00115 ↗
33. JSCE. Impact behavior and design of structures. Structural Engineering Series 6; 1993. (in Japanese).
34. Gere · 2003
35. Nyström U. Design with regard to explosions [Master’s thesis]. Chalmers University of Technology: Sweden; 2006.
36. TM5-1300/AFR 88–2/NAVFAC P-39. Structures to resist the effects of accidental explosions. Joint Departments of the Army, Air Force and Navy Washington, DC; 1990.
37. Newmark · 1971
38. Response of reinforced concrete elements to severe impulsive loads10.1061/(ASCE)0733-9445(1990)116:4(1061) ↗
39. Hysteresis in structural elements