Interface law for FRP–concrete delamination
Source abstract
Abstract
Abstract A procedure is developed for deriving a non-linear mode II interface law for Fibre Reinforced Polymer (FRP)–concrete bonding, starting from experimental data. The proposed interface law is based on a fractional formula and includes non-linear contributions of adhesive and concrete cover at high shear stresses. Parameters of the law are calibrated considering pull-pull delamination tests. Maximum transmissible load as well as strains along FRP-plates at different loading levels and bond lengths are used. In particular, the estimated value of maximum transmissible force by an anchorage of infinite length, is used to determine the fracture energy of interface law, whereas strains are used to obtain shear stress–slip data. A parameter optimization procedure is then applied to a series of experimental results reported in the literature. The proposed interface law is then adopted to perform numerical simulations making use of a bond-slip model. FRP strains, shear stresses and slips in the bonded region obtained numerically are in good agreement with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Teng · 2001
2. fib Bullettin no. 14. Externally bonded FRP reinforcement for RC structures 2001; fib, technical report.
3. ACI Committee 440F, Guide for design and construction of externally bonded FRP systems for strengthening concrete structures, 2002.
4. CNR (Italian National Research Council) Committee. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures, CNR DT 200/2004 Technical Report [in English].
5. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
6. The effect of surface preparation on the bond interface between FRP sheets and concrete members10.1016/S0263-8223(01)00057-5 ↗
7. Experimental study on RC beams with FRP strips bonded with rubber modified resins10.1016/j.compscitech.2004.05.016 ↗
8. Issues related to composite plating and environmental exposure effects on composite–concrete interface in external strengthening10.1016/S0263-8223(98)00031-2 ↗
9. Environmental effects on the short-term bond of carbon fiber-reinforced polymer (CFRP) composites10.1061/(ASCE)1090-0268(2003)7:1(58) ↗
10. FRP-strengthened RC beams I: review of debonding strength models10.1016/S0141-0296(01)00105-5 ↗
11. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
12. Assessment of available prediction models for the strength of FRP retrofitted RC beams10.1016/j.compstruct.2004.05.008 ↗
13. Monti G, Renzelli M, Luciani P. FRP adhesion to uncracked and cracked concrete zones. In: Tan KH, editor. FRPRCS-6 conference proceedings, Singapore, 2003. p. 183–92.10.1142/9789812704863_0015 ↗
14. Stress transfer and fracture propagation in different kinds of adhesive joints10.1061/(ASCE)0733-9399(2002)128:5(562) ↗
15. Neto P, Alfaiate J, Almeida JR, Pires EB, Vinagre J. The influence of the mode II fracture energy on the behaviour of composite plate reinforced concrete. In: Li et al., editors. Proceedings FraMCoS-5. vol. 2, Vail, Colorado. USA, 2004. p. 781–6.
16. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
17. Bond–slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
18. Bond and force transfer of composite material plates bonded to concrete
19. Cracking evolution in R/C tensile members strengthened by FRP-plates10.1016/S0013-7944(02)00166-2 ↗
20. Brosens K, Van Gemert D. Plate end shear design for external CFRP laminates. In: Mihashi H, Keitetsu R, editors. FraMCoS-3 Proceedings, Gifu (Japan), 1998. p. 1793–804.
21. A numerical model for FRP–concrete delamination10.1016/j.compositesb.2005.08.002 ↗
22. Savoia M, Ferracuti B, Mazzotti C. Delamination of FRP plate/sheets used for strengthening of r/c elements. In: Second international structural engineering and construction (ISEC-02) conference proceedings 2003, Rome, Italy, September 23–26.
23. Boundary element analysis of FRP–concrete delamination
24. A numerical approach to the complete stress–strain relation for concrete10.1016/0008-8846(73)90096-3 ↗
25. Ferrari F. private communication, 2003.
26. Brosens K. Anchorage of externally bonded steel plates and CFRP laminates for the strengthening of concrete elements. Ph.D. thesis, University of Leuven, Belgium; 2001.
27. Mazzotti C, Ferracuti B, Savoia M. An experimental study on FRP–concrete delamination. In: Li et al., editors. Proceedings of FraMCoS-5. Vail, Colorado, USA, vol. 2, 2004. p. 795–802.
28. Mazzotti C, Ferracuti B, Savoia M. A new set-up for FRP–concrete stable delamination test. In: Shield CK et al., editors. FRPRCS-7 Conference Proceedings. Kansas City, USA, 2005. p. 165–80.