Dynamic instability of functionally graded multilayer graphene nanocomposite beams in thermal environment

This paper studies the dynamic instability of functionally graded multilayer nanocomposite beams reinforced with a low content of graphene nanoplatelets (GPLs) and subjected to a combined action of a periodic axial force and a temperature change. The weight fraction of GPL nanofillers is assumed to be constant in each individual GPL-reinforced composite (GPLRC) layer but follows a layerwise variation across the beam thickness. The Halpin-Tsai micromechanics model is used to estimate the effective Young's modulus of GPLRC layers. The differential quadrature method is employed to convert the partial differential governing equations into a linear system of Mathieu-Hill equations, from which the principle unstable region of functionally graded multilayer GPLRC beams is determined by Bolotin's method. Special attention is given to the effects of GPL distribution pattern, weight fraction, geometry and dimension on the dynamic instability behaviour. The thermal buckling and free vibration are also discussed as subset problems. Numerical results show that distributing more GPLs near the top and bottom surfaces can effectively increase the natural frequency and reduce the size of the unstable region. The influences of GPL geometry and dimension tend to be insignificant when the GPL width-to-thickness ratio is larger than 10.