Review of methodologies for composite material modelling incorporating failure
Source abstract
Abstract
Advanced composite materials are finding increasing application in aerospace, marine and many other industries due to the advantages in performance, structural efficiency and cost they provide. However, despite years of extensive research around the world, a complete and validated methodology for predicting the behaviour of composite structures including the effects of damage has not yet been fully achieved. The Cooperative Research Centre for Advanced Composite Structures (CRC-ACS) is leading a currently running collaborative project to develop a methodology for determining mechanical behaviour and failure in composite structures. Key drivers of the project are the use of multi-axial testing machines for material characterisation and an appreciation of the issues involved due to the different length scales of any analysis. As part of the project, a critical review was performed to assess the state of the art in material constitutive modelling and composite failure theories. This paper summarises the results of the review, which includes a discussion of the various theories and approaches within the context of the dissipated energy density framework. The results of the review will be applied within the project to select appropriate constitutive modelling and failure approaches for implementation within a data-driven material characterisation methodology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Dynamics and Control of Mechanical Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Characterization of strain-induced damage in composites based on the dissipated energy density: part I to III10.1016/0167-8442(94)00050-B ↗
2. Michopoulos JG, Badaliance R, Chwastyk T, Gause L, Mast P. Effects of computational technology on composite materials research: the case of the dissipated energy density. In: Proceedings of the first hellenic conference on composite materials and structures, Greece; 2–5 July, 1997.
3. Michopoulos JG. Mechatronically automated characterization of material constitutive response. In: Computational mechanics WCCM VI in conjunction with APCOM’04, 5–10 September, Beijing, China; 2004.
4. Ochoa · 1992
5. Interfacial damage modelling of composites
6. 2004
7. Implicit constitutive modelling for viscoplasticity using neural networks10.1002/(SICI)1097-0207(19980930)43:2<195::AID-NME418>3.0.CO;2-6 ↗
8. Numerical implementation of a neural network based material model in finite element analysis10.1002/nme.905 ↗
9. An indirect implicit technique for modelling piezoelectric ceramics10.1016/j.commatsci.2008.01.008 ↗
10. Autoprogressive training of neural network constitutive models10.1002/(SICI)1097-0207(19980515)42:1<105::AID-NME356>3.0.CO;2-V ↗
11. Haj-Ali RM, Kim H-K. Nonlinear constitutive models for FRP composites using artificial neural networks. Mech Mater 2007. doi:10.1016/j.mechmat.2007.05.004.10.1016/j.mechmat.2007.05.004 ↗
12. Predicting failure in composite laminates using dissipated energy10.1177/002199803035187 ↗
13. Application of the finite element method to linear elastic fracture mechanics10.1115/1.3119488 ↗
14. A finite element calculation of stress intensity factors by a modified crack closure integral10.1016/0013-7944(77)90013-3 ↗
15. An efficient procedure for determining mixed-mode energy release rates in practical problems of delamination10.1016/S0168-874X(96)80007-2 ↗
16. Computational design of multiaxial tests for anisotropic material characterization
17. Online planning of multiaxial loading path for elastic material identification10.1016/j.cma.2007.05.027 ↗
18. Dávila CG, Camanho PP. Failure criteria for FRP laminates in plane stress. NASA/TM-2003-212663. VA, USA: NASA Langley Research Center; 2003.10.2514/6.2003-1991 ↗
19. Failure criteria for unidirectional composites10.1115/1.3153664 ↗
20. A progressive damage model for laminated composites containing stress concentrations10.1177/002199838702100904 ↗
21. Failure analysis of FRP laminates by means of physically based phenomenological models10.1016/S0266-3538(96)00140-6 ↗
22. Pinho ST, Dávila CG, Camanho PP, Iannucci L, Robinson P. Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity. NASA/TM-2005-213530. VA, USA: NASA Langley Research Center; 2005.
23. A fatigue failure criterion for fiber reinforced materials10.1177/002199837300700404 ↗
24. The predictive capability of failure mode concept-based strength criteria for multidirectional laminates
25. Damage tolerance of laminated composites containing an open hole and subject to compressive loadings: part I – analysis10.1177/002199839102500101 ↗
26. Irreversible constitutive law for modelling the delamination process using interfacial surface discontinuities10.1016/j.compstruct.2003.11.005 ↗
27. A general theory of strength for anisotropic materials10.1177/002199837100500106 ↗
28. Hinton · 2004
29. Wisnom MR, Hill GFJ, Jones MI. Through thickness failure prediction of composite structural elements. In: Proceedings of the 13th international conference on composite materials, Beijing, China. Paper no. 1623; 2001.
30. Camanho PP, Dávila CG. Mixed-mode decohesion finite elements for the simulation of delamination in composite materials. NASA/TM-2002-211737. VA, USA: NASA Langley Research Center; 2002.10.2514/6.2001-1486 ↗
31. Interlaminar fracture toughness: the long and winding road to standardization10.1016/S1359-8368(97)00013-9 ↗
32. Damage mechanics of composite materials
33. Predictions of the original and truncated maximum-strain failure models for certain fibrous composite laminates10.1016/S0266-3538(97)00192-9 ↗
34. Mixed mode delamination in plates: a refined approach10.1016/S0020-7683(01)00179-2 ↗
35. On the energy release rate and mode mix of delaminated shear deformable composite plates10.1016/j.ijsolstr.2003.11.039 ↗
36. Orifici AC. Degradation models for the collapse analysis of composite aerospace structures. PhD thesis. Royal Melbourne Institute of Technology; 2007.
37. VCCT for ABAQUS User’s Manual, Version 1.1; 2005. Rhode Island, USA: ABAQUS Inc.
38. Marc User Manuals Version 2007r1; 2007. Santa Ana (CA): MSC.Software Corporation.
39. On the role of lengthscale in the prediction of failure of composite structures: Assessment and needs10.1023/A:1008876701815 ↗
40. Hinton MJ, Kaddour AS. The second world-wide failure exercise: Benchmarking of failure criteria under triaxial stresses for fibre-reinforced polymer composites. In: Proceedings of the 16th international conference on composite materials; 8–13 July, 2007, Kyoto, Japan.
41. Kaddour AS, Hinton MJ, Li S, Smith PA. Damage theories for fibre-reinforced polymer composites: the third world-wide failure exercise (WWFE-III). In: Proceedings of the 16th international conference on composite materials; 8–13 July, 2007, Kyoto, Japan.
42. On the reducibility of failure theories for composite materials and structures10.1016/j.compstruct.2008.03.008 ↗
43. Greszczuk LB. Microbuckling of lamina-reinforced composites. Composite materials: testing and design (third conference). ASTM STP, vol. 546. American Society for Testing and Materials; 1974. p. 5–29.10.1520/STP35480S ↗
44. A continuum damage model for composite laminates: part I – constitutive model10.1016/j.mechmat.2007.03.005 ↗
45. Three dimensional finite element analysis of damage accumulation in composite laminate10.1016/0045-7949(82)90026-8 ↗
46. Stress based yield/failure criteria for fiber composites10.1016/S0020-7683(96)00038-8 ↗
47. Damage modelling of the elementary ply for laminated composites10.1016/0266-3538(92)90097-M ↗
48. An accumulative damage model for tensile and shear failures of laminated composite plates10.1177/002199839502900705 ↗
49. Gosse JH, Christensen S. Strain invariant failure criteria for polymers in composite materials. AIAA Paper. AIAA-2001-1184; 2001.10.2514/6.2001-1184 ↗
50. Sandhu RS. Ultimate strength analysis of symmetric laminates, AFFDL-TR-73-137, AD 779927, OH: Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base; 1974.
51. Analysis of laminate strength and its distribution10.1177/002199837801200305 ↗
52. Tensor transformations and failure criteria for the analysis of fiber composite materials10.1177/002199838802200906 ↗
53. A theory of the yielding and plastic flow of anisotropic metals10.1098/rspa.1948.0045 ↗
54. Tsai SW. Strength characteristics of composite materials. NASA CR-224; 1965.
55. The brittle strength of orthotropic materials10.1177/002199836700100210 ↗
56. Weighing failure tensor polynomial criteria for composites10.1177/105678959200100102 ↗
57. Development of a new yielding criterion: the Yeh–Stratton criterion10.1016/0013-7944(94)90256-9 ↗
58. Failure mode dependent strength criteria for composite laminates10.1177/073168449701601004 ↗
59. Kim RY, Soni SR. Failure of composite laminates due to combined interlaminar normal and shear stresses. In: Kawata K, Umekawa S, Kobayashi A, editors. Composites’86: recent advances in Japan and the United States, Proceedings of Japan-U.S. CCM-III; 1986. p. 341–50.
60. Analysis of progressive failure in composites10.1016/0266-3538(87)90092-3 ↗
61. Quadratic stress criterion for initiation of delamination10.1177/002199838802201205 ↗
62. Static strength of adhesively bonded ARALL-1 joints10.1177/002199839102500403 ↗
63. An assessment of failure criteria to predict the strength of adhesively bonded composite double lap joints10.1177/073168449701600803 ↗
64. Impact damage in composite aircraft structures – experimental testing and numerical simulation
65. A mixed-mode fracture criterion for composite materials10.1520/CTR10788J ↗
66. Hahn HT, Johnnesson T. A correlation between fracture energy and fracture morphology in mixed-mode fracture of composites. In: Mechanical behaviour of materials – IV, Stockholm; 1983. p. 431–8.10.1016/B978-1-4832-8372-2.50052-X ↗
67. Whitcomb JD. Analysis of instability-related growth of a through-width delamination. NASA TM-86301; 1984.
68. Fracture toughness testing of graphite/epoxy and graphite/peek composites10.1016/0010-4361(85)90616-0 ↗
69. Interlaminar fracture of composite materials
70. White SR. Mixed-mode interlaminar fracture of graphite/epoxy. Washington University; 1987.
71. The effect of geometry, rate and temperature on the mode I, mode II and mixed-mode I/II interlaminar fracture of carbon-fibre/poly(ether-ether ketone) composites10.1177/002199839002400902 ↗
72. An engineering method of determining the delamination fracture toughness of composite laminates10.1016/0013-7944(91)90212-J ↗
73. Hashemi S, Williams JG. Mixed-mode fracture in fiber-polymer composite laminates. In: O’Brien TK, editor. Composite materials: fatigue and fracture, vol. 3. ASTM STP 1110. W. Conshohocken (PA): ASTM Int.; 1991.10.1520/STP17717S ↗
74. Reeder JR. A bilinear failure criterion for mixed-mode delamination. In: Componeschi Jr ET, editor. Composite materials: testing and design (eleventh volume). ASTM STP 1206. W. Conshohocken (PA): ASTM Int.; 1993. p. 303–22.10.1520/STP12636S ↗
75. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus10.1016/0266-3538(96)00005-X ↗
76. An accurate mixed-mode delamination failure criterion for laminated fibrous composites requiring limited experimental input10.1177/0021998306071031 ↗
77. A combined stress-based and fracture mechanics-based model for predicting delamination in composites10.1016/0010-4361(93)90016-2 ↗
78. Stringer peeling effects at stiffened composite panels in the postbuckling range10.2514/3.46410 ↗
79. A nonlinear finite element approach for the analysis of mode-I free edge delamination in composites10.1016/0020-7683(93)90014-X ↗
80. Modelling the initiation and growth of delaminations in composite structures10.1177/002199839703100804 ↗
81. Progressive delamination using interface elements10.1177/002199839803201401 ↗
82. Prediction of delamination initiation and growth from discontinuous plies using interface elements10.1016/S1359-835X(97)00134-6 ↗
83. The finite element analysis of impact induced delamination in composite materials using a novel interface element10.1016/S1359-835X(97)00080-8 ↗
84. Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model10.1016/S0263-8223(00)00091-X ↗
85. A damage model for simulation of mixed-mode delamination growth10.1016/S0263-8223(01)00051-4 ↗
86. An interface element formulation for the simulation of delamination with buckling10.1016/S0013-7944(01)00052-2 ↗
87. Simulation of delamination in fiber composites with a discrete cohesive failure model10.1016/S0266-3538(00)00245-1 ↗
88. Application of a delamination model to laminated composite structures10.1016/S0263-8223(02)00021-1 ↗
89. A continuum damage model for delaminations in laminated composites10.1016/S0022-5096(02)00075-3 ↗