Research and applications of viscoelastic vibration damping materials: A review
Source abstract
Abstract
Abstract This paper presents a comprehensive review of the various research methods and theory calculation models that are employed in engineering to study the static and dynamic vibration characteristics of viscoelastic damping material (VDM) formed structures. The review classifies of traditional VDMs by their physical properties, application fields and calculation methods. A thorough description and comparison is performed between conventional and improved methods and, their applicability, and the advantages and disadvantages of each calculation theory in engineering structures that contain VDM are sequentially illustrated. VDM mathematical models in previous studies are then described and compared. Finally, the future development of VDM and its composites are discussed. The main objective of this paper is to serve the interests of researchers and engineers involved in the analysis and design of structures whose vibration must be reduced by VDM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Acoustic Wave Phenomena Research · Vibration Control and Rheological Fluids
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Experimental validation of modal strain energies based damage identification method for a composite sandwich beam10.1016/j.compscitech.2009.03.019 ↗
2. Review of advanced composite structures for naval ships and submarines10.1016/S0263-8223(00)00175-6 ↗
3. Numazawa M, Tsuzuki K, Ohashi Y. Water-based coated-type vibration damping material. US Patents; 2010.
4. Litvinov · 2002
5. Damping behaviour of dynamically cured butyl rubber/polypropylene blends10.1016/0032-3861(94)90382-4 ↗
6. Jalili · 2009
7. Cady · 1946
8. Numerical modeling methodology and experimental study for piezoelectric vibration damping control of rotating composite fan blades10.1016/j.compstruc.2013.06.001 ↗
9. Nonlinear vibration of functionally graded cylindrical shells embedded with a piezoelectric layer10.1016/j.tws.2014.01.030 ↗
10. Active constrained layer damping of geometrically nonlinear transient vibrations of composite plates using piezoelectric fiber-reinforced composite10.1016/j.tws.2008.05.011 ↗
11. Damping of structural vibrations with piezoelectric materials and passive electrical networks10.1016/0022-460X(91)90762-9 ↗
12. Advances in hybrid active–passive vibration and noise control via piezoelectric and viscoelastic constrained layer treatments10.1177/107754630100700406 ↗
13. Development of a finite element model for the identification of mechanical and piezoelectric properties through gradient optimisation and experimental vibration data10.1016/S0263-8223(02)00192-7 ↗
14. Vibration damping as a result of piezoelectric energy harvesting10.1016/j.sna.2011.04.043 ↗
15. The effect of non-linear piezoelectric coupling on vibration-based energy harvesting10.1177/1045389X09343218 ↗
16. Piezoelectric energy harvesting from broadband random vibrations10.1088/0964-1726/18/11/115005 ↗
17. Matrix-assisted energy conversion in nanostructured piezoelectric arrays10.1021/nl102863c ↗
18. Enhanced energy harvesting using multiple piezoelectric elements: theory and experiments10.1016/j.sna.2013.01.008 ↗
19. Comparison of piezoelectric energy harvesting devices for recharging batteries10.1177/1045389X05056681 ↗
20. Artificial piezoelectric grass for energy harvesting from turbulence-induced vibration10.1088/0964-1726/21/10/105024 ↗
21. A review of power harvesting using piezoelectric materials (2003–2006)10.1088/0964-1726/16/3/R01 ↗
22. Development and testing of a dynamic absorber with corrugated piezoelectric spring for vibration control and energy harvesting applications10.1016/j.ymssp.2012.10.012 ↗
23. Nonlinear output properties of cantilever driving low frequency piezoelectric energy harvester10.1063/1.4768219 ↗
24. A rotation energy harvester employing cantilever beam and magnetostrictive/piezoelectric laminate transducer10.1016/j.sna.2010.12.026 ↗
25. Hybrid energy harvester based on piezoelectric and electromagnetic mechanisms10.1117/1.3373516 ↗
26. Silicon nanowires nanogenerator based on the piezoelectricity of alpha-quartz10.1039/c3nr03838f ↗
27. Broadband energy harvesting using acoustic black hole structural tailoring10.1088/0964-1726/23/6/065021 ↗
28. Broadband attenuation in phononic beams induced by periodic arrays of feedback shunted piezoelectric patches10.1088/0256-307X/29/6/064302 ↗
29. Vibration damping and control using shunted piezoelectric materials10.1177/058310249803000301 ↗
30. Control orientated synthesis of high-performance piezoelectric shunt impedances for structural vibration control10.1109/TCST.2004.838547 ↗
31. A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers10.1109/TCST.2003.813371 ↗
32. Piezoelectric modal sensor/actuator pairs for critical active damping vibration control10.1121/1.401260 ↗
33. Active vibration control of laminated composite plates using piezoelectric devices: a finite element approach10.1177/1045389X9300400409 ↗
34. Active damping by a local force feedback with piezoelectric actuators10.2514/3.20848 ↗
35. Piezoelectricity and its use in disturbance sensing and control of flexible structures: a survey10.1115/1.3111074 ↗
36. Recent advances in sensing and control of flexible structures via piezoelectric materials technology10.1115/1.3098923 ↗
37. A dynamic stiffness analysis of damped tubes filled with granular materials10.1016/S0045-7949(98)00272-7 ↗
38. Damping of structural vibration using lightweight granular materials10.1007/s11340-008-9181-x ↗
39. Lenzi A. The use of damping material in industrial machines [Doctoral]: University of Southampton; 1985.
40. Predictions of total loss factors of structures, part II: loss factors of sand-filled structure10.1016/0022-460X(86)90266-X ↗
41. Prediction of total loss factors of structures, I: theory and experiments10.1016/0022-460X(85)90250-0 ↗
42. Prediction of total loss factors of structures Part III: effective loss factors in quasi-transient conditions10.1016/0022-460X(86)90192-6 ↗
43. Response of impact dampers with granular materials under random excitation10.1002/(SICI)1096-9845(199603)25:3<253::AID-EQE553>3.0.CO;2-4 ↗
44. Michon G, Almajid A, Ferrero JF, Aridon G, Fascio V, Heurteau JP. Dissipation mechanisms identification of soft hollow particle-dampers in honeycomb structures for micro-vibrations environment. In: 11th European conference on spacecraft structures, materials & mechanical testing; 2009.
45. Recent applications of viscoelastic damping for noise control in automobiles and commercial airplanes10.1016/S0022-460X(03)00106-8 ↗
46. Experimental study of the effect of viscoelastic damping materials on noise and vibration reduction within railway vehicles10.1016/j.jsv.2008.03.071 ↗
47. Damped vibration analysis using finite element method with approximated modal damping for automotive double walls with a porous material10.1016/j.jsv.2009.03.018 ↗
48. Improvement of structures vibroacoustics by widespread embodiment of viscoelastic materials10.1016/j.ast.2012.11.003 ↗
49. Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model10.1016/j.compstruct.2013.09.001 ↗
50. Etude d’une méthode de measure du frottement intérieur de revêtements plastiques travaillant en flexion
51. Ueber die dämpfung der biegeschwingungen dünner blech durch fest haftende beläge
52. The Effect of a damping compound on jet-efflux excited vibrations: an article in two parts presenting theory and results of experimental investigation part I the structural damping due to the compound10.1108/eb033220 ↗
53. The effect of a damping compound on jet-efflux excited vibrations: an article in two parts presenting theory and results of experimental investigation10.1108/eb033235 ↗
54. The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary conditions10.1016/0022-460X(69)90193-X ↗
55. Loss factors and resonant frequencies of encastré damped sandwich beams10.1016/0022-460X(70)90050-7 ↗
56. Governing equations for vibrating constrained-layer damping sandwich plates and beams10.1115/1.3422825 ↗
57. Dynamic analysis and damping of composite structures embedded with viscoelastic layers10.1016/S1359-8368(96)00073-X ↗
58. Numerical studies of shear damped composite beams using a constrained damping layer10.1016/j.compstruct.2007.04.025 ↗
59. Experimental study on vibration and damping of curved panel treated with constrained viscoelastic layer10.1016/j.compstruct.2009.07.011 ↗
60. Dimensionless analysis of constrained damping treatments10.1016/j.compstruct.2012.11.037 ↗
61. Dynamic responses of plates with viscoelastic free layer damping treatment10.1115/1.2888191 ↗
62. Vibration control in machines and structures using viscoelastic damping10.1006/jsvi.1997.1317 ↗
63. Vibration attenuation of a cylindrical shell with constrained layer damping strips treatment10.1016/S0045-7949(01)00009-8 ↗
64. Structural vibration of flexural beams with thick unconstrained layer damping10.1016/j.ijsolstr.2008.06.015 ↗
65. Influence of partial constrained layer damping on the bending wave propagation in an impacted viscoelastic sandwich10.1016/j.ijsolstr.2013.07.023 ↗
66. Transient response of a plate with partial constrained viscoelastic layer damping10.1016/j.ijmecsci.2013.01.032 ↗
67. Optimization of partial constrained layer damping treatment for vibrational energy minimization of vibrating beams10.1016/j.compstruc.2004.07.002 ↗
68. Dynamics of active piezoelectric damping composites10.1016/S1359-8368(00)00020-2 ↗
69. Optimization of energy dissipation characteristics of active constrained layer damping10.1088/0964-1726/6/3/014 ↗
70. Dynamic characteristics of exhaust hanger composed of rubber and thin metal ring10.1299/jsmec.49.750 ↗
71. Dynamic characterization of automotive exhaust isolators10.1243/0954407041581110 ↗
72. Rao · 2001
73. Experimental study of hydraulic engine mounts using multiple inertia tracks and orifices: narrow and broad band tuning concepts10.1016/j.jsv.2012.07.001 ↗
74. Vibration reduction on city buses: determination of optimal position of engine mounts10.1016/j.ymssp.2010.04.001 ↗
75. Fixed points on the nonlinear dynamic properties of hydraulic engine mounts and parameter identification method: experiment and theory10.1016/j.jsv.2007.04.045 ↗
76. Experimental and analytical study of secondary path variations in active engine mounts10.1016/j.jsv.2014.11.024 ↗
77. Mechanical filtering characteristics of passive periodic engine mount10.1016/j.finel.2010.03.007 ↗
78. Model based feed-forward control of electromagnetic type active control engine-mount system10.1016/j.jsv.2009.01.033 ↗
79. The effects of nonlinearity on the output frequency response of a passive engine mount10.1016/j.jsv.2008.04.016 ↗
80. Experimental study and simulation of a hydraulic engine mount with fully coupled fluid–structure interaction finite element analysis model10.1016/j.compstruc.2004.05.017 ↗
81. Controlled equilibrium mounts for aircraft engine isolation10.1016/j.conengprac.2005.03.007 ↗
82. A new type of semi-active hydraulic engine mount using controllable area of inertia track10.1016/j.jsv.2009.09.015 ↗
83. Dynamic stiffness and loss factor measurement of engine rubber mount by impact test10.1016/j.matdes.2010.12.015 ↗
84. A literature review of automotive vehicle engine mounting systems10.1016/S0094-114X(00)00023-9 ↗
85. Suh · 1997
86. Schmitt RV, Leingang CJ. Design of elastomeric vibration isolation mounting systems for internal combustion engines. SAE Technical Paper; 1976.10.4271/760431 ↗
87. Coleman EW. Adhesive layer comprising. US Patents; 1959.
88. Browne KA, Taylor ES. Engine mount. US Patent 2,175,825; 1939.
89. Zhu J, Krutz GW, Haghighi K. Dynamic analysis of an engine chassis mount bracket using the finite element method. SAE Technical Paper; 1988.10.4271/881854 ↗
90. Sayers MW, Mink C. A simulation graphical user interface for vehicle dynamics models. SAE Technical Paper; 1995.10.4271/950169 ↗
91. The effect of carbon nanotubes on viscoelastic behaviour of biomedical grade ultra-high molecular weight polyethylene10.1016/j.compstruct.2013.05.027 ↗
92. The effect of functionalization on the viscoelastic behavior of multi-wall carbon nanotube/epoxy composites10.1016/j.matdes.2012.09.013 ↗
93. Vibrations of carbon nanotubes and their composites: a review10.1016/j.compscitech.2006.03.031 ↗
94. Dynamic response of composites sandwich plates with carbon nanotubes subjected to blast loading10.1016/j.compositesb.2012.07.035 ↗
95. A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites10.1016/j.compscitech.2006.06.015 ↗
96. Modeling and characterization of damping in carbon nanofiber/polypropylene composites10.1016/S0266-3538(03)00054-X ↗
97. Viscoelastic properties of carbon nanofiber reinforced multiscale syntactic foam10.1016/j.compositesb.2013.10.079 ↗
98. A review on polymer nanofibers by electrospinning and their applications in nanocomposites10.1016/S0266-3538(03)00178-7 ↗
99. Nanocomposites in context10.1016/j.compscitech.2004.11.003 ↗
100. Development of viscoelastic/rate-sensitive-plastic constitutive law for fiber-reinforced composites and its applications. Part I: theory and material characterization10.1016/j.compscitech.2007.06.003 ↗