Delamination formation, evaluation and suppression during drilling of composite laminates: A review
Source abstract
Abstract
Abstract Fiber reinforced composite laminates have been increasingly replacing conventional materials in various manufacturing sectors due to their extremely superior mechanical properties. Usually, mechanical drilling is an important final manufacturing process for composite laminates, whereas drilling of high-strength composite laminates is very challenging and difficult. As the most undesirable damage and challenging failure mode, drilling-induced delamination for fiber reinforced composite laminates is a hot research area of immerse engineering importance. A review on the path towards delamination-free drilling for composite laminates can significantly help researchers improve currently-available cost-effective drilling process and develop high performance drilling process. This review paper summarizes an up-to-date progress in drilling-induced delamination for composite laminates reported in the literature. It covers delamination formation mechanism, delamination quantification methodologies and measurement technologies, delamination suppression strategies (including tool design optimization, drilling conditions optimization and high performance drilling methods). This general review of drilling-induced delamination for composite laminates can be referenced as not only a summary of the current results from literature survey but also future work possibilities, giving the researchers the opportunity to deepen specific aspects and explore new aspects for reaching delamination-free drilling for composite laminates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A review of mechanical drilling for composite laminates10.1016/j.compstruct.2011.11.024 ↗
2. Process chains for high-precision components with micro-scale features10.1016/j.cirp.2016.05.001 ↗
3. A review of modeling and control during drilling of fiber reinforced plastic composites10.1016/j.compositesb.2012.10.038 ↗
4. Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites10.1016/j.jmatprotec.2010.02.011 ↗
5. Sensing of drill wear and prediction of drill life10.1115/1.3439211 ↗
6. A new method to reduce delaminations during drilling of FRP laminates by feed rate control10.1016/j.compstruct.2017.12.005 ↗
7. Damage developments in drilling glass fiber reinforced plastics10.1016/0890-6955(94)00055-O ↗
8. Neural network approach for estimate the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates10.1016/j.matdes.2010.01.011 ↗
9. Feasibility study of ultrasonic elliptical vibration-assisted reaming of carbon fiber reinforced plastics/titanium alloy stacks10.1016/j.ultras.2016.11.011 ↗
10. Composite materials parts manufacturing10.1016/j.cirp.2018.05.005 ↗
11. An approach to evaluate delamination factor when drilling carbon fiber-reinforced plastics using different drill geometries: experiment and finite element study10.1007/s00170-017-0880-2 ↗
12. Using dampers to mitigate thrust forces during carbon-fibre reinforced polymer drilling: Experimental and finite element evaluation10.1177/0731684417734396 ↗
13. A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates10.1016/0890-6955(96)00013-2 ↗
14. Optimisation Du Processus De perçage d'empilages Hybrides Composites/Titane [Master
15. Recent advances in drilling hybrid FRP/Ti composite: A state-of-the-art review10.1016/j.compstruct.2015.09.028 ↗
16. A review on finite element method for machining of composite materials10.1016/j.compstruct.2017.06.012 ↗
17. The path towards delamination-free drilling of composite materials10.1016/j.jmatprotec.2005.06.039 ↗
18. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates10.1016/j.compscitech.2006.10.009 ↗
19. An Investigation of burrs, chip formation, hole size, circularity and delamination during drilling operation of GLARE using ANOVA10.1016/j.compstruct.2016.10.015 ↗
20. Effect of drilling parameters on hole quality and delamination of hybrid GLARE laminate10.1016/j.compstruct.2017.11.073 ↗
21. New analytical model for delamination of CFRP during drilling10.1016/j.jmatprotec.2016.10.007 ↗
22. Delamination-free drilling of thick composite materials10.1016/j.compositesa.2015.02.008 ↗
23. Modelling fracture and delamination in composite laminates: Energy release rate and interface stress10.1016/j.compstruct.2018.02.006 ↗
24. Mechanistic cutting force modelling for micro-drilling of CFRP composite laminates10.1016/j.cirpj.2016.07.002 ↗
25. Delamination in drilling GFR-thermoset composites10.1016/S0263-8223(03)00180-6 ↗
26. Machinability analysis in drilling woven GFR/epoxy composites: Part I – Effect of machining parameters10.1016/j.compositesa.2009.11.006 ↗
27. Machinability analysis in drilling woven GFR/epoxy composites: part II – effect of drill wear10.1016/j.compositesa.2010.04.011 ↗
28. An assessment of thermally influenced and delamination-induced regions by composites drilling10.1016/j.compstruct.2018.02.046 ↗
29. Cutting temperature and resulting influence on machining performance in rotary ultrasonic elliptical machining of thick CFRP10.1016/j.ijmachtools.2017.08.008 ↗
30. Drilling process optimization for graphite/bismaleimide–titanium alloy stacks10.1016/S0263-8223(03)00137-5 ↗
31. Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich10.1016/j.compositesb.2011.08.054 ↗
32. Taguchi analysis of delamination associated with various drill bits in drilling of composite material10.1016/j.ijmachtools.2004.02.019 ↗
33. Cutting edge rounding: an innovative tool wear criterion in drilling CFRP composite laminates10.1016/j.ijmachtools.2009.08.002 ↗
34. Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites10.1016/j.compstruct.2013.04.026 ↗
35. Delamination during drilling in composite laminates
36. Effects of feed rate and chisel edge on delamination in composites drilling
37. Delamination-free drilling of composite laminates10.1115/1.2902131 ↗
38. A mechanical model for predicting critical thrust forces in drilling composite laminates10.1243/0954405011515235 ↗
39. Drilling of composites structures10.1016/S0263-8223(01)00040-X ↗
40. Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills10.1016/S1359-835X(00)00069-5 ↗
41. Analytical models of composite material drilling10.1007/s00170-010-2773-5 ↗
42. Effects of special drill bits on drilling-induced delamination of composite materials10.1016/j.ijmachtools.2005.10.004 ↗
43. Comprehensive analysis of delamination in drilling of composite materials with various drill bits10.1016/S0924-0136(03)00749-0 ↗
44. Thrust force and delamination of core-saw drill during drilling of carbon fiber reinforced plastics (CFRP)10.1007/s00170-007-0963-6 ↗
45. Effect of eccentricity of twist drill and candle stick drill on delamination in drilling composite materials10.1016/j.ijmachtools.2004.08.001 ↗
46. Analysis of delamination in drilling composite materials using core drill10.1080/14484846.2003.11464466 ↗
47. Prediction of critical thrust force for tubular composite in drilling-induced delamination by numerical and experimental analysis10.1016/j.compstruct.2018.07.051 ↗
48. Délaminage lors du perçage d'un composite carbone-époxy
49. Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures10.1016/j.compositesa.2006.07.009 ↗
50. A new analytical critical thrust force model for delamination analysis of laminated composites during drilling operation10.1016/j.compositesb.2017.05.039 ↗
51. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates10.1016/S0890-6955(96)00095-8 ↗
52. Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core–saw drill10.1007/s00170-011-3532-y ↗
53. Da Silva · 2013
54. Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials10.1016/j.jmatprotec.2006.12.043 ↗
55. Study of drilling-induced defects for CFRP composites using new criteria10.1016/j.compstruct.2018.06.051 ↗
56. Damage development in drilling glass fiber reinforced plastics10.1016/0890-6955(94)00055-O ↗
57. The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials10.1243/0954405021519735 ↗
58. Prediction and minimization of delamination in drilling of mediumdensity fiberboard (MDF) using response surface methodology and Taguchi design10.1080/10426910801938379 ↗
59. A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP)10.1016/j.compstruct.2016.08.004 ↗
60. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments10.1016/S0263-8223(02)00257-X ↗
61. Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor10.1016/j.ijmachtools.2007.10.015 ↗
62. Analysis of delamination in drilling glass fiber reinforced polyester composites10.1016/j.matdes.2012.08.047 ↗
63. Hole-quality evaluation in drilling fiber-reinforced composites10.1016/j.compstruct.2018.07.105 ↗
64. Non-destructive detection of drilling-induced delamination in CFRP and its effect on mechanical properties10.1016/j.proeng.2016.06.647 ↗
65. Drilling tool geometry evaluation for reinforced composite laminates10.1016/j.compstruct.2009.10.035 ↗
66. Damage evaluation of drilled carbon/epoxy laminates based on area assessment methods10.1016/j.compstruct.2012.08.003 ↗
67. Evaluation of delamination damage on composite plates using an artificial neural network for the radiographic image analysis10.1177/0021998309351244 ↗
68. Methodology analysis for evaluation of drilling-induced damage in composites10.1007/s00170-014-5616-y ↗
69. Measuring delamination in carbon/epoxy composites using a shadow moiré laser based imaging technique10.1016/j.compstruct.2005.11.039 ↗
70. Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills10.1016/j.ijmachtools.2005.01.009 ↗
71. Delamination reduction in drilling composite materials by active backup force10.1016/j.cirp.2012.03.036 ↗
72. Tool effects on hybrid laminates drilling10.1080/10426910903229354 ↗
73. Delamination detection and impact damage assessment of GLARE by active thermography
74. Experimental analysis on delamination damage by acoustic emission in high speed drilling of carbon fiber reinforced plastics
75. Computerized tomography and C-scan for measuring drilling-induced delamination in composite material using twist drill and core drill10.4028/www.scientific.net/KEM.339.16 ↗
76. Experimental analysis of drilling damage in carbon-fiber reinforced thermoplastic laminates manufactured by resin transfer molding10.1177/0021998311414218 ↗
77. Critical thrust force predictions during drilling: Analytical modeling and X-ray tomography quantification10.1016/j.compstruct.2016.07.015 ↗
78. Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites10.1016/j.jmatprotec.2007.10.050 ↗
79. Influence of point angle on drill hole quality and machining forces when drilling CFRP10.1016/j.procir.2012.04.084 ↗
80. Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite10.1016/j.eswa.2010.02.023 ↗
81. Drill geometry and operating effects when cutting small diameter holes in CFRP10.1016/j.ijmachtools.2009.05.009 ↗
82. Influence of machining parameters and tool structure on cutting force and hole wall damage in drilling CFRP with stepped drills10.1007/s00170-018-1981-2 ↗
83. Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP10.1016/j.compstruct.2018.07.007 ↗
84. Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs10.1016/j.compstruct.2017.10.061 ↗
85. Delamination analysis of carbon fibre reinforced laminates: Evaluation of a special step drill10.1016/j.compscitech.2009.01.025 ↗
86. Machining strategies for hole making in composites with minimal workpiece damage by directing the process forces inwards10.1016/j.jmatprotec.2010.10.004 ↗
87. Novel drill bit based on the step-control scheme for reducing the CFRP delamination10.1016/j.jmatprotec.2018.06.037 ↗
88. Novel drill structure for damage reduction in drilling CFRP composites10.1016/j.ijmachtools.2016.08.006 ↗
89. A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills10.1016/j.ijmachtools.2014.10.002 ↗
90. Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates10.1016/j.compositesb.2012.01.007 ↗
91. Investigation on delamination and flexural properties in drilling of carbon nanotube/polymer composites10.1016/j.compstruct.2018.06.041 ↗
92. Experimental analysis of delamination, thrust force and surface roughness on drilling of glass fibre reinforced polymer composites material using different drills10.1016/j.matpr.2017.07.095 ↗
93. Characterization of the dry high speed drilling process of woven composites using Machinability Maps approach10.1016/j.cirp.2009.03.100 ↗
94. Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms10.1016/j.compscitech.2006.05.003 ↗
95. Evaluation of delamination in drilling GFRP composites10.1080/10426910802385026 ↗
96. Experimental studies on effect of process parameters on delamination in drilling GFRP composites using Taguchi method10.1016/j.mspro.2014.07.185 ↗
97. Ahmad · 2009
98. Wear resistance of CVD and PVD multilayer coatings when dry cutting fiber reinforced polymers (FRP)10.1016/j.wear.2013.03.017 ↗
99. Critical thrust and feed prediction models in drilling of composite laminates10.1016/j.compstruct.2016.03.059 ↗
100. Study on tool wear and workpiece surface integrity following drilling of CFRP laminates with variable feed rate strategy10.1016/j.procir.2018.05.055 ↗