A review of recent research on mechanics of multifunctional composite materials and structures
Source abstract
Abstract
Abstract In response to the marked increase in research activity and publications in multifunctional materials and structures in the last few years, this article is an attempt to identify the topics that are most relevant to multifunctional composite materials and structures and review representative journal publications that are related to those topics. Articles covering developments in both multiple structural functions and integrated structural and non-structural functions since 2000 are emphasized. Structural functions include mechanical properties like strength, stiffness, fracture toughness, and damping, while non-structural functions include electrical and/or thermal conductivity, sensing and actuation, energy harvesting/storage, self-healing capability, electromagnetic interference (EMI) shielding, recyclability and biodegradability. Many of these recent developments are associated with polymeric composite materials and corresponding advances in nanomaterials and nanostructures, as are many of the articles reviewed. The article concludes with a discussion of recent applications of multifunctional materials and structures, such as morphing aircraft wings, structurally integrated electronic components, biomedical nanoparticles for dispensing drugs and diagnostics, and optically transparent impact absorbing structures. Several suggestions regarding future research needs are also presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Aeroelasticity and Vibration Control · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Challenges and opportunities in multifunctional nanocomposite structures for aerospace applications10.1557/mrs2007.231 ↗
2. Functionalized composite structures for new generation airframes: a review10.1016/j.compscitech.2004.12.015 ↗
3. Advances in the science and technology of carbon nanotubes and their composites: a review10.1016/S0266-3538(01)00094-X ↗
4. An assessment of the science and technology of carbon nanotube composites10.1016/j.compscitech.2009.10.004 ↗
5. Big returns from small fibers: a review of polymer/carbon nanotube composites10.1002/pc.20058 ↗
6. Sensors and actuators based on carbon nanotubes and their composites: a review10.1016/j.compscitech.2008.01.006 ↗
7. Vibrations of carbon nanotubes and their composites: a review10.1016/j.compscitech.2006.03.031 ↗
8. Energy absorption capability of nanocomposites: a review10.1016/j.compscitech.2009.06.020 ↗
9. A review and analysis of electrical percolation in carbon nanotube polymer composites10.1016/j.compscitech.2008.06.018 ↗
10. Modeling and analysis of functionally graded materials and structures10.1115/1.2777164 ↗
11. A review of vibration-based structural health monitoring with special emphasis on composite materials10.1177/0583102406065898 ↗
12. Vibration-based model dependent damage identification and health monitoring for composite structures – a review10.1006/jsvi.1999.2624 ↗
13. Self-healing polymeric materials: a review of recent developments10.1016/j.progpolymsci.2008.02.001 ↗
14. Energy harvesting for structural health monitoring sensor networks10.1061/(ASCE)1076-0342(2008)14:1(64) ↗
15. A review of power harvesting from vibration using piezoelectric materials10.1177/0583102404043275 ↗
16. A review of power harvesting using piezoelectric materials (2003–2006)10.1088/0964-1726/16/3/R01 ↗
17. Powering MEMS portable devices – a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems10.1088/0964-1726/17/4/043001 ↗
18. Recent advances in shape memory polymers and composites: a review10.1007/s10853-007-2176-7 ↗
19. Gibson R, Gianaris NJ, Lucht B, Beckwith SW, editors. Proc 2008 SAMPE fall tech conf “multifunctional materials: working smarter together”, September 8–11, 2008, Memphis, TN: Soc for Adv of Mater and Process Eng., Covina CA.
20. Smart composite materials: selected papers from the international conference on multifunctional materials and structures (MFMS 08), Hong Kong, 28–31 July 200810.1088/0964-1726/18/7/070201 ↗
21. Improvement of vibration damping capacity and fracture toughness in composite laminates by the use of polymeric interleaves10.1115/1.1370385 ↗
22. Characterizing energy dissipation in single-walled carbon nanotube polycarbonate composites10.1063/1.2007867 ↗
23. Interfacial damping characteristics of carbon nanotube-based composites10.1016/j.compscitech.2004.06.001 ↗
24. Passive vibration damping enhancement using carbon nanotube–epoxy reinforced composites10.1016/j.compscitech.2005.05.015 ↗
25. Carbon nanotube films for damping applications10.1002/1521-4095(20020704)14:13/14<997::AID-ADMA997>3.0.CO;2-0 ↗
26. Multifunctional structural reinforcement featuring carbon nanotube films10.1016/S0266-3538(03)00065-4 ↗
27. The properties of epoxy resin coated silica fillers composites10.1016/j.matlet.2006.08.036 ↗
28. Manjunatha CM, Taylor AC, Kinloch AJ, Sprenger S. The tensile fatigue behavior of a GFRP composite with rubber particle modified epoxy matrix. J Reinf Plastics Compos; 2009. doi: 10.1177/0731684409344652 [Online First, September 8, 2009].10.1177/0731684409344652 ↗
29. Nanocomposite matrix for increased fibre composite strength10.1016/j.polymer.2005.08.003 ↗
30. The growth of multiwalled carbon nanotubes with different morphologies on carbon fibers10.1016/j.carbon.2004.10.013 ↗
31. Strength of unidirectional glass/epoxy composite with silica nanoparticle-enhanced matrix10.1016/j.compscitech.2008.02.026 ↗
32. Improved dispersion and mechanical properties of hybrid nanocomposites10.1016/j.compscitech.2009.09.017 ↗
33. Tailoring the mechanical properties of epoxy resin by various nanoparticles
34. Fracture behavior of in situ nanoparticle-filled epoxy at different temperatures10.1016/j.polymer.2008.06.040 ↗
35. The effect of rubber micro-particles and silica nano-particles on the tensile fatigue behavior of a glass fibre epoxy composite10.1007/s10853-008-3092-1 ↗
36. Effect of inclusion size on mechanical properties of polymeric composites with micro and nano particles10.1016/j.compscitech.2005.12.028 ↗
37. A molecular dynamics simulation study of inclusion size effect on polymeric matrix composites10.1016/j.commatsci.2007.03.001 ↗
38. Carbon nanotube/carbon fiber hybrid multiscale composite10.1063/1.1466880 ↗
39. Multifunctional composites using reinforced laminae with carbon nanotube forests10.1038/nmat1650 ↗
40. Long carbon nanotubes grown on the surface of fibers for hybrid composites10.2514/1.25004 ↗
41. Joining prepreg composite interfaces with aligned carbon nanotubes10.1016/j.compositesa.2008.03.011 ↗
42. Fabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown in situ10.1016/j.compscitech.2008.02.028 ↗
43. Limitations of Mode I interlaminar toughening of composites reinforced with aligned carbon nanotubes10.1177/0021998309102398 ↗
44. Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes10.1016/j.compscitech.2009.09.001 ↗
45. Gibson T, Putthanarat S, Fielding JC, Drain A, Will K, Stoffel M. Conductive nanocomposites: focus on lightning strike protection. In: Proc int SAMPE tech conf and exhibition – from art to science: advancing mater and proc eng; 2007.
46. Mechanical and electrical properties of a MWNT/epoxy composite10.1016/S0266-3538(02)00129-X ↗
47. Carbon nanotube integrated multifunctional composites10.1088/0957-4484/18/27/275708 ↗
48. Multifunctional polypropylene composites produced by incorporation of exfoliated graphite nanoplatelets10.1016/j.carbon.2007.03.029 ↗
49. Multifunctional properties of high volume fraction aligned carbon nanotube polymer composites with controlled morphology10.1016/j.compscitech.2009.08.006 ↗
50. Ultra-low electrical percolation threshold in carbon-nanotube–epoxy composites10.1016/S0032-3861(03)00539-1 ↗
51. Correlations between percolation threshold, dispersion state, and aspect ratio of carbon nanotubes10.1002/adfm.200700065 ↗
52. Processing and electrical properties of carbon nanotube/vinyl ester nanocomposites10.1016/j.compscitech.2008.06.023 ↗
53. Effect of nanotube waviness on the electrical conductivity of carbon nanotube-based composites10.1016/j.compscitech.2007.10.056 ↗
54. On the lack of thermal percolation in carbon nanotube composites10.1063/1.2056591 ↗
55. Carbon nanotube composites for thermal management10.1063/1.1469696 ↗
56. Thermal properties and percolation in carbon nanotube–polymer composites10.1063/1.2813625 ↗
57. Enhanced thermal conductivity of carbon fiber/phenolic resin composites by the introduction of carbon nanotubes10.1063/1.2710778 ↗
58. Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites10.1016/j.carbon.2008.02.008 ↗
59. Enhancement of through-thickness thermal conductivity in adhesively bonded joints through using aligned carbon nanotubes10.1016/j.compscitech.2007.09.016 ↗
60. Can a coupling coefficient of a piezoelectric device be higher than those of its active material?10.1177/1045389X9700801005 ↗
61. Characterization of piezoelectric wafer active sensors10.1106/A1HU-23JD-M5AU-ENGW ↗
62. Piezoelectric thin films for sensors, actuators and energy harvesting10.1557/mrs2009.177 ↗
63. Piezolectric MEMS sensors: state-of-the-art and perspectives10.1088/0957-0233/20/9/092001 ↗
64. Hagood NW, Bent AA. Development of piezoelectric fiber composites for structural actuation. In: Proc 34th AIAA structures, structural dynamics and mater conference; AIAA paper no. 93-1717, La Jolla, CA; 1993.10.2514/6.1993-1717 ↗
65. Anisotropic actuation with piezoelectric fiber composites10.1177/1045389X9500600305 ↗
66. Hollow piezoelectric composites10.1016/0924-4247(95)01221-4 ↗
67. Piezoceramic hollow fiber active composites10.1016/S0266-3538(03)00259-8 ↗
68. Concept and model of a piezoelectric structural fiber for multifunctional composites10.1016/j.compscitech.2007.12.017 ↗
69. Fabrication and electromechanical characterization of a piezoelectric structural fiber for multifunctional composites10.1002/adfm.200800859 ↗
70. Development and characterization of magnetorheological elastomers10.1002/app.24348 ↗
71. The manufacture of composite structures with a built-in network of piezoceramics10.1016/S0266-3538(02)00007-6 ↗
72. Built-in sensor network for structural health monitoring of composite structure10.1177/1045389X06064353 ↗
73. Damage detection for composite laminate plates with a distributed hybrid PZT/FBG sensor network10.1177/1045389X08101632 ↗
74. A built-in active sensor network for health monitoring of composite structures10.1088/0964-1726/15/6/050 ↗
75. Damage assessment of multi-layered composite structure using an embedded active sensor network10.4028/www.scientific.net/KEM.334-335.461 ↗
76. Impact-induced damage characterization of composite plates using neural networks10.1088/0964-1726/16/2/033 ↗
77. An automated impact monitor for a composite panel employing smart sensor technology10.1088/0964-1726/14/1/027 ↗
78. Online damage detection for laminated composite shells partially filled with fluid10.1016/j.compstruct.2006.05.019 ↗
79. Control of smart laminated FRP structures using artificial neural networks10.1177/0731684405049877 ↗
80. Multifunctional layer-by-layer carbon nanotube-polyelectrolyte thin films for strain and corrosion sensing10.1088/0964-1726/16/2/022 ↗
81. Passive wireless sensing using SWMT-based multifunctional thin film patches10.3233/JAE-2008-961 ↗
82. Layer-by-layer assembled composites from multiwall carbon nanotubes with different morphologies10.1021/nl048950w ↗
83. Multilayer composites from vapor-grown carbon nano-fibers10.1016/j.compscitech.2005.11.004 ↗
84. Generation and storage of electricity from power harvesting devices10.1177/1045389X05047210 ↗
85. Embedding thin-film lithium energy cells in structural composites10.1016/j.compscitech.2008.02.019 ↗
86. Energy storage structural composites: a review10.1177/0021998308097682 ↗
87. Inkjet printed electronics for multifunctional composite structure10.1016/j.compscitech.2009.02.034 ↗
88. Design and fabrication of multifunctional structural batteries10.1016/j.jpowsour.2008.09.082 ↗
89. Electrochemical and mechanical behavior in mechanically robust solid polymer electrolytes for use in multifunctional structural batteries10.1021/cm070213o ↗
90. Evaluation of commercially available carbon fibers, fabrics and papers for potential use in multifunctional energy storage applications10.1149/1.3065070 ↗
91. O’Brien DJ, Baechle DM, Wetzel ED. Multifunctional structural composite capacitors for US Army applications. In: Proc int SAMPE tech conf, 38th fall tech conf: global adv mater proc eng; 2006.
92. Baechle DM, O’Brien DJ, Wetzel ED. Design and processing of structural composite capacitors. In: Proc int SAMPE symposium and exhibition, M and P – from coast to coast and around the world; 2007.
93. Carbon fiber/polymer matrix composites as capacitors10.1016/S0266-3538(00)00166-4 ↗
94. Characterization of multifunctional structural capacitors for embedded energy storage10.1063/1.3267482 ↗
95. Autonomic healing of polymer composites10.1038/35057232 ↗
96. Fracture testing of a self-healing polymer composite10.1007/BF02412141 ↗
97. Full recovery of fracture toughness using a nontoxic solvent-based self-healing system10.1002/adfm.200800300 ↗
98. Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite – part I: manual infiltration10.1016/j.compscitech.2005.04.020 ↗
99. Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite – part II: in situ self-healing10.1016/j.compscitech.2005.04.053 ↗
100. Fatigue crack propagation in microcapsule toughened epoxy10.1007/s10853-006-0512-y ↗