Effects of hold-time at a certain temperature on LCF behavior and failure mechanism of a titanium matrix composite
Source abstract
Abstract
The effects of hold-time at a given temperature on tensile behavior, LCF response and failure mechanism of a 10 vol% SiC particulate reinforced titanium alloy have been investigated. The specimens were heated to 600 °C by using a controlled atmosphere furnace, held at this temperature for duration ranging from 0 to 100-h low cycle fatigue (LCF) and tensile tests were then performed at room temperature. These results coupled with microstructural examinations, chemical analysis and image analysis, were used to determine the effects of hold-time at 600 °C on the tested material. The results showed that exposure time had a considerable effect on LCF life and failure mechanism of the material. The longer the hold-time, the lower was the fatigue life. In addition, the cyclic response, elongation to failure and tensile strength of the material were influenced by exposure time at the tested temperature. The results are discussed according to change in reinforcement/metal interfaces due to holding at this temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
2. Ti5Si3 whisker in situ reinforced TiAl alloys10.1007/s11661-001-0132-8 ↗
3. Time-dependent fatigue crack growth in titanium metal matrix composite10.1016/S0142-1123(97)83269-0 ↗
4. Experimental assessment of fatigue life and failure modes in a SiC/Ti composite10.1016/S0266-3538(97)00218-2 ↗
5. An evaluation of fiber-reinforce titanium matrix composites for advanced high-temperature aerospace applications10.1007/BF02669450 ↗
6. Review on particulate-reinforced titanium matrix composites
7. Effect of matrix and fibre type on low cycle fatigue of [90]8 sigma fibre reinforced titanium matrix composite10.1016/S0266-3538(02)00264-6 ↗
8. Interfaces and fatigue damage in a metastable beta titanium matrix composite
9. Interface effects on crack deflection and bridging during fatigue crack growth of titanium matrix composites10.1016/S1359-6454(97)00179-1 ↗
10. Toda · Metall Mater Trans A · 1996 · 27 · 201310.1007/BF02651950 ↗
11. Fatigue in fibrous composite materials
12. Fatigue Crack growth resistances of unidirectional fiber reinforce titanium metal–matrix composites under transverse loading10.1007/s11661-000-0236-6 ↗
13. Observation of short fatigue crack-growth process in SiC-fiber-reinforced Ti-15-3 alloy composite10.1007/BF02652376 ↗
14. Effects of interfacial strength on fatigue crack growth in a fiber-reinforced Ti-alloy composite10.1007/BF02672576 ↗
15. The cyclic fatigue and fracture behavior of a titanium alloy metal matrix composite10.1016/0013-7944(95)00014-M ↗
16. The kinetics and mechanism of interfacial reaction in sigma fiber-reinforced Ti MMCs10.1016/S1359-835X(96)00105-4 ↗
17. Suresh · 1989
18. Chawla · 1987
19. Bonding, structure and properties of metal/ceramic interfaces: part 1 chemical bonding, chemical reaction, and interfacial structure10.1179/imr.1993.38.5.233 ↗
20. SiC filament/titanium matrix composites regarded as model composites, part 2. Fiber/matrix chemical interactions at high temperatures10.1007/BF00550832 ↗
21. Microstructural characterization of layered interfaces in a silicon carbide fiber reinforced titanium matrix composite10.1016/0956-716X(95)00257-V ↗
22. Material characterization of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites. Part 1 tensile and fatigue behavior10.1007/BF02669451 ↗
23. Damage mechanisms and life prediction in high temperature fatigue of unidirectional SiC composite10.1016/S0142-1123(01)00092-5 ↗
24. The effect of long term exposure on the interfacial chemistry and Mechanical properties of metal matrix composites
25. Effect of interfacial debonding and sliding on matrix crack initiation during isothermal fatigue of SCS-6/Ti-15-3 composite10.1007/s11661-000-0208-x ↗
26. Strength degradation of SiC fiber during manufacture of titanium matrix composites by plasma spraying and hot pressing10.1007/s11661-001-0188-5 ↗
27. Low cycle fatigue behavior of particulate reinforced metal matrix composites10.1023/A:1004720300774 ↗
28. Klesnil · 1980
29. Cyclic strain resistance and cyclic fracture behavior of 2124 aluminum alloy10.1016/0142-1123(93)90181-O ↗
30. An experimental and numerical study of cyclic deformation in metal matrix composites10.1007/BF02675568 ↗
31. Reed-Hill · 1994
32. Suresh · 1998
33. Cyclic softening mechanisms of Zry-4 at room temperature: the unlikely influence of texture variations10.1016/j.scriptamat.2004.05.017 ↗
34. Effect of grain size: texture on the cyclic stress–strain behavior of polycrystalline copper10.1016/S0921-5093(98)00812-0 ↗
35. Micromechanical stresses during low cycle fatigue of an over aged Al–Mg–Si alloy
36. Zener · 1984
37. The effect of matrix reinforcement reaction on fracture in Ti–6Al–4V-base composites10.1007/BF02672573 ↗
38. A study of the reaction zone in an SiC fiber-reinforced titanium alloy composite10.1007/BF02672572 ↗