Experimental evaluation of mode I fracture toughness of dissimilar-material joints with thermal residual stresses
Source abstract
Abstract
The mode I interlaminar fracture toughness of dissimilar-material joints with thermal residual stresses is experimentally evaluated. The double cantilever beam (DCB) test is commonly used to assess the interlaminar fracture toughness of composites but is inadequate when dissimilar materials are joined owing to the mixed mode, which arises from differences in the bending stiffness and the thermal residual stresses formed during manufacturing because of differences in the linear expansion coefficient of the adherends. To address these difficulties, a new test, named the constant-load DCB test, was developed to evaluate the mode I interlaminar fracture toughness. In this study, a testing machine, based on the theoretical method previously established to derive the mode I interlaminar fracture toughness of dissimilar-material joints, is manufactured, and the fracture toughness is experimentally determined. As a result, good agreement between the theoretical value and experimental results is obtained, and the mode mixity ratio is significantly decreased compared with that of the general DCB test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Behavior of Composites · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Overview of automotive structural composites technology developments in Japan10.1016/j.compscitech.2017.09.015 ↗
2. CFRP/titanium hybrid material for improving composite bolted joints10.1016/j.compstruct.2007.05.010 ↗
3. Hybrid titanium-CFRP laminates for high-performance bolted joints10.1016/j.compositesa.2009.02.010 ↗
4. Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys - a review10.1016/j.compositesa.2017.06.007 ↗
5. Review on techniques to improve the strength of adhesive joints with composite adherends10.1016/j.compositesb.2019.107363 ↗
6. On fracture characteristics of adhesive joints with dissimilar materials - an experimental study using digital image correlation (DIC) technique10.1016/j.compstruct.2018.06.018 ↗
7. Statistical test planning for ultrasonic welding of dissimilar materials using the example of aluminum-carbon fiber reinforced polymers (CFRP) joints10.1002/mawe.201200943 ↗
8. Ultrasonic welding of aluminum alloys to fiber reinforced polymers10.1002/adem.201300043 ↗
9. Huxhold · 2012 · 505
10. Using reaction heat of laser-induced Al-Ti-C interlayer to connect CFRTP/aluminum10.1016/j.optlastec.2018.12.044 ↗
11. Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel10.1016/j.matdes.2012.12.015 ↗
12. Shear strength optimization of laser-joined polyphenylene sulfide-based CFRTP and stainless steel10.1007/s11223-018-0028-0 ↗
13. Effect of the interfacial nanostructure on the interlaminar fracture toughness and damage mechanisms of directly bonded carbon fiber reinforced thermoplastics and aluminum
14. The effect of nanospike structures on direct bonding strength properties between aluminum and carbon fiber reinforced thermoplastics10.1016/j.compositesb.2019.05.025 ↗
15. 2013
16. How pure mode I can be obtained in bi-material bonded DCB joints: a longitudinal strain-based criterion10.1016/j.compositesb.2018.07.033 ↗
17. Towards pure mode I loading in dissimilar adhesively bonded double cantilever beams10.1016/j.ijadhadh.2021.102826 ↗
18. Analysis of sandwich single cantilever beam test specimen with graded core10.1080/09243046.2021.1907037 ↗
19. Shear strength and failure modes of double-lap bi-material CFRP/Ni-Cr alloy joint under severe environmental conditions
20. Experimental and numerical investigations on the failure behavior of metal skin and carbon fiber-reinforced polymer core structures considering layup and manufacturing process conditions
21. Hygrothermal effect on the strain energy release rates and mode mixity of asymmetric delaminations in generally layered beams10.1016/j.engfracmech.2019.03.006 ↗
22. On the calculation of energy release rates for cracked laminates with residual stresses10.1007/s10704-006-0044-0 ↗
23. Correction method for evaluation of interfacial fracture toughness of DCB, ENF and MMB specimens with residual thermal stresses10.1016/j.compscitech.2007.08.025 ↗
24. Energy release rates of bi-material interface crack including residual thermal stresses: application of crack tip element method10.1016/j.engfracmech.2009.09.018 ↗
25. On the energy release rate and mode mix of delaminated shear deformable composite plates10.1016/j.ijsolstr.2003.11.039 ↗
26. Reduction of thermal residual stress in carbon fiber aluminum laminates using a thermal expansion clamp10.1016/j.compositesa.2011.04.001 ↗
27. Post-stretching induced stress redistribution in Fibre Metal Laminates for increased fatigue crack growth resistance10.1016/j.compscitech.2008.11.006 ↗
28. Smart cure cycle for reducing the thermal residual stress of a co-cured E-glass/carbon/epoxy composite structure for a vanadium redox flow battery10.1016/j.compstruct.2014.09.037 ↗
29. Interface crack between two elastic layers10.1007/BF00018123 ↗
30. 2019
31. A single leg bending test for interfacial fracture toughness determination10.1007/BF00034525 ↗
32. Mixed mode I/II crack growth investigation for bi-metal FSW aluminum alloy AA7075-T6/pure copper joints10.1016/j.tafmec.2019.102243 ↗
33. DCB-specimen loaded with uneven bending moments10.1007/s10704-006-0071-x ↗
34. An analytical crack-tip element for layered elastic structures10.1115/1.2895931 ↗
35. Experimental measurement of mode-I fracture toughness of dissimilar material joints with thermal residual stresses10.1016/j.engfracmech.2020.107249 ↗
36. Japanese Industrial Standards (JIS) K 7086, Testing Methods for Interlaminar Fracture Toughness of Carbon Fiber Reinforced Plastics (in Japanese).
37. Prestandardization study on mode II interlaminar fracture toughness test for cfrp in Japan10.1016/0010-4361(95)93669-B ↗
38. Analytical compliance method for Mode I interlaminar fracture toughness testing of composites10.1016/0010-4361(87)90364-8 ↗