A methodology for using long-period gratings and mold-filling simulations to minimize the intrusiveness of flow sensors in liquid composite molding
Source abstract
Abstract
In liquid composite molding (LCM), a fiber preform is placed in the mold and a thermoset resin is injected into the closed mold cavity to occupy the spaces in between the fibers. A significant number of LCM parts are rejected on account of inadequate resin impregnation of the reinforcement preform during the mold filling stage. Hence, implementing sensors and active control can improve the cost efficiency of mold filling. In this paper, long-period grating sensors are utilized to monitor flow front progression. A methodology has been devised to compare the performances of different sensor configurations in the mold. Sensor performance evaluation is based on comparing the resin arrival times between the ideal mold filling situation and several simulated non-ideal scenarios. This methodology can be applied to any other discrete-sensor technology with an on/off response to the presence of resin and for other mold-filling anomalies. Filling simulations of a square plaque mold with a curved edge are used to illustrate the methodology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Composite Material Mechanics · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Flow and cure phenomena in liquid composite molding10.1002/pc.750150504 ↗
2. Micro scale flow behavior and void formation mechanism during impregnation through a unidirectional stitched fiberglass mat10.1002/pen.760351006 ↗
3. Brosius D, Clarke S. Textile preforming techniques for low cost structural composites. In: Proc. 7th Annual ASM/ESD Advanced Comp. Conf. Mater., 1991. p. 1–10.
4. Mold filling and cure modeling of RTM and SRIM processes10.1016/0263-8223(94)90072-8 ↗
5. Modeling and simulation of resin transfer molding: gate control, venting and dry spot prediction10.1016/1359-835X(95)00012-Q ↗
6. Parnas · 2000
7. Modeling preform impregnation and void formation in resin transfer molding of unidirectional composites
8. Dry spot formation and changes in liquid composite molding10.1177/002199839603001303 ↗
9. Flow and void characterization of stitched structural composites using resin film infusion process (RFIP)
10. The interactions between flows occurring inside and outside fabric tows during RTM10.1016/S0266-3538(97)00019-5 ↗
11. Permeability characterization10.1002/pc.750160602 ↗
12. Effective average permeability of multi-layer preforms in resin transfer molding10.1016/0266-3538(96)00037-1 ↗
13. Prediction of filling time and vent locations for resin transfer molding10.1177/002199839703101104 ↗
14. Resin impregnation during composite manufacturing theory and experimentation10.1016/0266-3538(89)90055-9 ↗
15. Experimental investigation of resin temperature during filling and curing in epoxy and nickel shell RTM molds
16. Steenkamer DA. Influence of preform design and manufacturing issues on the processing and performance of resin transfer molded composites. PhD dissertation, University of Delaware, 1994.
17. A simulation of reinforcement deformation during the production of preforms for liquid moulding processes10.1243/PIME_PROC_1994_208_088_02 ↗
18. Recent developments encompassing non-isothermal/isothermal liquid composite molding process modeling/analysis10.1177/089270579801100602 ↗
19. Yalvac S, Cohen A, Pollard M, A review of modeling of resin transfer molding process—part 2: mold filling simulation. In: Proc. First Int. Conf. Transport Phenomena in Processing 1992. p. 1194–202.
20. Resin transfer molding flow phenomena in polymeric composites
21. Simulation of resin transfer molding for a cubic shell geometry
22. A fast numerical method for isothermal resin transfer mold filling
23. Simulation of the injection process in resin transfer molding10.1002/pc.10298 ↗
24. Development of a numerical code that simulates combined heat transfer, resin flow and compaction during composites manufacturing10.1016/0956-7143(95)99648-C ↗
25. M, Numerical analysis of the resin transfer molding process by the finite element method10.1002/adv.1993.060120401 ↗
26. Experimental investigation and flow visualization of resin transfer molding process in a non-planar geometry10.1016/S0266-3538(96)00100-5 ↗
27. Resin transfer molding process monitoring and control
28. Effect of micro-structure variations on the permeability of preform materials
29. Optical fiber sensors for the quantitative measurement of strain in reinforced concrete structures
30. In situ cure monitoring of epoxy resins using optical fibre sensors10.1088/0964-1726/5/4/005 ↗
31. Advances in resin transfer molding flow monitoring using SMART weave sensors
32. Hautamaki C, Zurn S, Mantell SC, Polla DL. Embedded microelectromechanical systems (MEMS) for measuring strain in composites. In: Proc. 13th Annual ASC Technol. Conf. Comp. Mater. 1998. p. 44–54.
33. Kikuchi · Porc. ASME MD Advances in Computer-Aided Eng. (CAE) of Polym. Proc · 1994 · 49 · 69
34. Development of an on-line, in situ fiber optic void sensor10.1177/089270579400700304 ↗
35. In situ sensor monitoring and intelligent control of the resin transfer molding process
36. Strain analysis of thick and thin composites with embedded optical fibers under compression
37. Skordos AA, Karkanas PI, Partridge, IK. Novel dielectric sensor setup for flow and cure monitoring in resin transfer molding. Proc. 12th Int. Conf. Comp. Mater. 1999.
38. The use of evanescent wave fluorescence spectroscopy for control of the liquid molding process10.1177/073168449601500904 ↗
39. Fiber optic sensors for use in monitoring flow front in vacuum resin transfer molding processes10.1063/1.1148065 ↗
40. Sensor placement study for online flow monitoring in liquid composite molding10.1002/pc.10200 ↗
41. Long period gratings as flow sensors for liquid composite molding10.1117/12.385495 ↗
42. Real-time immunoassays using fiber-optic long-period grating sensors10.1117/12.238795 ↗
43. Long-period fibre grating fabrication with focused CO2 laser pulses10.1049/el:19980239 ↗
44. Comparison of optical fiber long-period and Bragg grating sensors10.1117/12.240853 ↗
45. Bhatia V. Properties and sensing applications of long-period gratings. PhD dissertation, Virginia Polytechnic and State University, 1996.
46. Grating-based optical-fiber-based corrosion sensors10.1117/12.240857 ↗
47. Long-period fiber-grating-based gain equalizers10.1364/OL.21.000336 ↗
48. Finite element analysis of embedded optical fibre sensors10.1117/12.184869 ↗
49. Structurally integrated fiber optic damage assesment system for composite materials10.1364/AO.28.002626 ↗
50. Mechanical properties of composite materials containing embedded fibre optic sensors10.1117/12.50193 ↗
51. Skontorp A. Structural integrity of quasi-isotropic composite laminates with embedded optical fibers. In: Proc. 13th Annual ASC Technol. Conf. Comp. Mater. 1998. p. 63–82.
52. Milovich D. Dielectric resin flow sensing as an aid to RTM process development. In: Proc. 41st Sagamore Army Mater. Research Conf. 1994. p. 365–76.
53. Free-surface flow observations in the resin transfer molding (RTM) process
54. Optical fibre Bragg grating sensors for aerospace smart structures
55. Simacek P, Sozer EM, Advani SG. User manual for drape 1.1 and LIMS 4.0, CCM Report 98-01, 1998.
56. Characterization of racetracking in liquid composite molding processes10.1016/S0266-3538(99)00077-9 ↗
57. Experimental analysis and numerical modeling of flow channel effects in resin transfer molding10.1002/pc.10172 ↗
58. Fabric structure and mold curvature effects on preform permeability and mold filling in RTM process, part II10.1016/S1359-835X(99)00088-3 ↗
59. A finite element/control volume approach to mold filling in anisotropic porous media10.1002/pc.750110613 ↗
60. RTM
61. Stochastic modeling of nonisothermal flow during resin transfer molding10.1016/S0017-9310(98)00377-9 ↗