Hydrothermal aging induced interfacial degradation behavior of 3D printed continuous glass fiber composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Single and repeated low-velocity impact response of CFRP laminates with bioinspired double-helicoidal bouligand structures10.1016/j.compscitech.2025.111320 ↗
2. Dual-scale parametric modeling and optimal design method of CFRP automotive roof beam10.1016/j.compstruct.2023.116695 ↗
3. Design and manufacture of structure-function integrated carbon fiber reinforced plastics for composite construction10.1016/j.compositesb.2024.112030 ↗
4. Compatibilization of ultra-high molecular weight polyethylene (UHMWPE) fibers and their composites for superior mechanical performance: a concise review10.1016/j.compositesb.2024.111294 ↗
5. Interfacial adhesion quality in 3D printed continuous CF/PA6 composites at filament/matrix and interlaminar scales10.1016/j.compositesb.2021.108891 ↗
6. Line width prediction and mechanical properties of 3D printed continuous fiber reinforced polypropylene composites
7. Experimental study on interface failure behavior of 3D printed continuous fiber reinforced composites
8. Bioinspired staggered diaphragm design of multi-cell thin-walled structures for enhancing compressive performance10.1016/j.compscitech.2025.111104 ↗
9. On multi-stage deformation and gradual energy absorption of 3D printed multi-cell tubes with varying cross-section10.1016/j.engstruct.2024.118839 ↗
10. Effects of undulating printing paths on axial compressive behaviors of 3D-printed continuous fiber-reinforced multi-cell thin-walled structure10.1016/j.engstruct.2024.119353 ↗
11. Electrothermal performance of 3D printed continuous carbon fiber reinforced structures with different geometric configurations10.1016/j.compstruct.2025.119763 ↗
12. Nonlinear coarse-graining models for 3D printed multi-material biomimetic composites
13. Study of the interlaminar fracture under mode I loading on FFF printed parts10.1016/j.compstruct.2019.02.005 ↗
14. Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters10.1016/j.compositesb.2020.108474 ↗
15. Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites10.1016/j.compositesb.2019.107147 ↗
16. A mechanistic model for tensile property of continuous carbon fiber reinforced plastic composites built by fused filament fabrication
17. Fabrication of continuous carbon, glass and kevlar fibre reinforced polymer composites using additive manufacturing
18. Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites10.1016/j.compositesa.2018.09.001 ↗
19. 3D printed continuous CF/PA6 composites: effect of microscopic voids on mechanical performance10.1016/j.compscitech.2020.108077 ↗
20. Moisture diffusion in multi-layered materials: the role of layer stacking and composition10.1016/j.compositesb.2025.112128 ↗
21. Moisture effect on the mechanical properties of additively manufactured continuous carbon fiber‐reinforced nylon‐based thermoplastic10.1002/pc.25789 ↗
22. Effect of thermal and hydrothermal accelerated aging on 3D printed polylactic acid10.3390/polym14235256 ↗
23. Hygrothermal aging effect on the water diffusion in glass fiber reinforced polymer (GFRP) composite: experimental study and numerical simulation10.1016/j.compscitech.2022.109762 ↗
24. Investigating the role of fibre-matrix interfacial degradation on the ageing process of carbon fibre-reinforced polymer under hydrothermal conditions10.1016/j.compscitech.2024.110922 ↗
25. Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications
26. Experimental study on hydrothermal aging of 3D-printed hybrid composite trapezoidal structures with continuous carbon-fiber and short carbon-fiber10.1016/j.engfailanal.2025.109351 ↗
27. Glinz · 2024
28. Hygrothermal aging and durability prediction of 3D-printed hybrid fiber composites with continuous carbon/kevlar-fiber and short carbon-fiber10.1016/j.engfailanal.2024.108958 ↗
29. A comparative assessment of hydrothermal aging effects on performance and failure modes of additively manufactured continuous basalt fiber-reinforced thermoplastic composites10.1016/j.compositesa.2025.109195 ↗
30. Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication10.1016/j.compstruct.2018.09.014 ↗
31. Ageing effect on the low-velocity impact response of 3D printed continuous fibre reinforced composites10.1016/j.compositesb.2023.111031 ↗
32. Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes10.1016/j.compstruct.2022.116136 ↗
33. Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: temperature effect10.1007/s10965-018-1551-1 ↗
34. Hygrothermal aging effects on the mechanical properties of 3D printed composites with different stacking sequence of continuous glass fiber layers10.1016/j.polymertesting.2021.107242 ↗
35. Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process10.1016/j.matdes.2010.04.022 ↗
36. Simulation analysis and optimization of 3D printed continuous carbon fiber reinforced composites10.1016/j.compstruct.2025.118840 ↗
37. Peel tests for quantifying adhesion and toughness: a review10.1016/j.pmatsci.2023.101086 ↗
38. Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests10.1016/j.compstruct.2016.12.058 ↗
39. A multiscale study of heat treatment effects on the interlayer mechanical properties of 3D printed continuous carbon fiber‐reinforced composites10.1002/pc.28034 ↗
40. Heat-treatment effects on dimensional stability and mechanical properties of 3D printed continuous carbon fiber-reinforced composites10.1016/j.compositesa.2021.106460 ↗
41. Hygrothermal ageing effects on failure behaviour of fibre-reinforced polymer composite materials under in-situ SEM testing10.1016/j.compositesb.2025.112148 ↗
42. Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites10.1016/j.tws.2021.107717 ↗
43. Effects of hydrothermal aging on carbon fibre/epoxy composites with different interfacial bonding strength10.1016/j.conbuildmat.2017.11.171 ↗
44. Effect of moisture on the mechanical properties of glass fiber reinforced polyamide composites10.1016/j.apt.2016.02.006 ↗
45. Hydrothermal aging of carbon fiber reinforced epoxy composites with different interface structures10.1016/j.polymdegradstab.2023.110352 ↗
46. Effects of hygrothermal aging on the tensile and bonding performance of consolidated 3D printed polyamide-6 composites reinforced with short and multidirectional continuous carbon fibers10.1016/j.compositesa.2022.107334 ↗
47. Annealing effect on crystalline structure and mechanical properties in long glass fiber reinforced polyamide 6610.1002/app.44832 ↗
48. Nucleation and crystallization of PA6 composites prepared by T-RTM: effects of carbon and glass fiber loading10.3390/polym11101680 ↗
49. Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: physicochemical, mechanical and morphological characterization10.1007/s10965-017-1292-6 ↗
50. Influence of hygrothermal aging on the durability and interfacial performance of pultruded glass fiber-reinforced polymer composites10.1007/s10853-018-2944-6 ↗
51. Burst strength and impact behaviour of hydrothermally aged glass fibre/epoxy composite pipes10.1016/j.matdes.2015.09.082 ↗
52. Effects of hydrothermal aging on moisture absorption and property prediction of short carbon fiber reinforced polyamide 6 composites10.1016/j.compositesb.2018.08.138 ↗
53. Hygrothermal resistance of pultruded carbon, glass and carbon/glass hybrid fiber reinforced epoxy composites10.1016/j.conbuildmat.2021.125710 ↗
54. Hygrothermal aging behavior and aging mechanism of carbon nanofibers/epoxy composites10.1016/j.conbuildmat.2021.123538 ↗
55. A pressure modulation approach to enhance mechanical properties of 3D-printed continuous fiber-reinforced composites10.1016/j.compscitech.2025.111277 ↗
56. Effect of short multi-walled carbon nanotubes on the mode I fracture toughness of woven carbon fiber reinforced polymer composites10.1016/j.conbuildmat.2020.119696 ↗
57. Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid methylmethacrylate thermoplastic matrix10.1016/j.compositesb.2017.09.057 ↗
58. Effect of crystallinity on the interlaminar fracture toughness of continuous glass fiber-polyamide composites10.1163/156855192X00161 ↗
59. Enhancement of interlaminar fracture toughness in textile-reinforced epoxy composites with polyamide 6/graphene oxide interlaminar toughening tackifier10.1016/j.compscitech.2020.108094 ↗
60. Interfacial fracture characterization of multi-material additively manufactured polymer composites10.1016/j.jcomc.2021.100145 ↗