journal article·2021-01Open access

Effective through-the-thickness diffusivity of plain-woven composite from analytical homogenization

Simon Heide-Jørgensen, Claus H. Ibsen, Michal K. Budzik

Abstract

Aging of composites is of great concern as it reduces durability. Diffusion plays an important role in aging, as it is responsible for transporting substance from the surface into the bulk. The microstructure of woven composites, which is complex and highly heterogeneous, makes diffusion analysis challenging. One way of simplifying the problem is by obtaining an effective diffusivity through homogenization and rules-of-mixtures. In this paper a homogenized through-the-thickness diffusivity of plain-woven composites is derived analytically with offset in the microstructure of the tows. A rule-of-mixtures based on Fickian diffusion and the volume fractions of constituents is proposed as an efficient way of obtaining the effective diffusion coefficient. The analytical expression is benchmarked against a three-dimensional orthotropic finite element analysis using material and geometrical parameters from the literature. Very good agreement between the two approaches is observed, which supports use of the homogenization. Notes on how this work could aid in understanding aging are included.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Composite Material Mechanics · Epoxy Resin Curing Processes · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Martin · 2008
2. Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints10.1016/0143-7496(95)91624-F ↗
3. Polymer ageing: physics, chemistry or engineering? Time to reflect
4. Long-term thermo-oxidative aging in composite materials: failure mechanisms10.1016/S0266-3538(97)00123-1 ↗
5. Jawaid · 2019
6. Thermal and thermo-oxidative ageing of an epoxy adhesive10.1016/S0141-3910(00)00028-8 ↗
7. Thermo-oxidative ageing effect on mechanical properties and morphology of short fibre reinforced polyamide composites – comparison of carbon and glass fibres10.1039/C7RA07884F ↗
8. On the fracture behaviour of CFRP bonded joints under mode I loading: effect of supporting carrier and interface contamination10.1016/j.compscitech.2018.03.024 ↗
9. Simulation of the oxygen permeability of a composite container10.3390/jcs2020021 ↗
10. Coupled hydro-mechanical aging of short flax fiber reinforced composites10.1016/j.polymdegradstab.2016.06.016 ↗
11. Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography10.1016/j.compscitech.2019.01.018 ↗
12. Initiation of stress-corrosion cracking in unidirectional glass/polymer composite materials10.1016/S0266-3538(00)00208-6 ↗
13. Davies · 2014 · vol. 208
14. Effects of solvent exposure on the adhesion of grafted PE to EVOH copolymer10.1016/j.ijadhadh.2004.03.005 ↗
15. Investigation of 3D moisture diffusion coefficients and damage in a pultruded E-glass/polyester structural composite10.1177/0021998308098152 ↗
16. Diffusion of 65Zn in AZ91 and in QE22 reinforced by Saffil fibers10.1016/j.compscitech.2007.06.017 ↗
17. Water absorption and diffusion characteristics of nanohydroxyapatite (nHA) and poly(hydroxybutyrate-co-hydroxyvalerate-) based composite tissue engineering scaffolds and nonporous thin films10.1155/2013/479109 ↗
18. Crack growth along heterogeneous interface during the DCB experiment10.1016/j.ijsolstr.2017.05.013 ↗
19. Mechanics and fracture of structured pillar interfaces10.1016/j.jmps.2019.103825 ↗
20. Combined experimental/numerical investigation of directional moisture diffusion in glass/epoxy composites10.1016/j.compscitech.2017.08.002 ↗
21. Analytical modeling of orthotropic diffusivities in a fiber reinforced composite with discontinuities using homogenization10.1016/j.compscitech.2009.04.019 ↗
22. Moisture absorption and desorption in epoxy composite laminates
23. Micromechanics modeling of moisture diffusion in woven composites10.1016/j.compscitech.2004.01.015 ↗
24. Modeling of plain weave fabric composite geometry10.1177/002199839903300301 ↗
25. Crank · 1979
26. Effects of hygrothermal stress on the failure of CFRP composites10.1016/j.compstruct.2015.08.016 ↗
27. Moisture diffusion and hygrothermal aging in bismaleimide matrix carbon fiber composites: part II”woven and hybrid composites10.1016/S0266-3538(02)00162-8 ↗
28. Moisture diffusion and hygrothermal aging in bismaleimide matrix carbon fiber composites”part I: uni-weave composites10.1016/S0266-3538(02)00161-6 ↗
29. Fluid diffusion in cracked composite laminates “ Analytical, numerical and experimental study10.1016/j.compscitech.2018.03.025 ↗
30. Micromechanics of diffusion-induced damage evolution in reinforced polymers10.1016/j.compscitech.2010.11.027 ↗