A novel approach for the interfacial stress analysis of composite adhesively bonded joints
Source abstract
Abstract
Abstract This paper presents a novel approach for the interfacial stress analysis of composite single-lap joints (SLJ). The analytical modeling is based on the interface elasticity where both the shear and peel stresses are assumed to be variant across the adhesive layer thickness. The unknown interfacial parameters are determined by using an experiment-based inverse method. The finite element simulation is then performed to calculate the interfacial stress distributions and evaluate the effect of the structural parameters on the interfacial behavior of the composite bonded joints. It is shown that both the peel and shear stresses at the interface are influenced by the interface energy and geometry parameters of the composite bonded joint. Numerical results are presented both to demonstrate the advantages of the present model over existing ones and to illustrate the main characteristics of interfacial stress distributions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Bonded repair of composite aircraft structures: a review of scientific challenges and opportunities10.1016/j.paerosci.2013.03.003 ↗
2. Adhesively bonded joints in composite materials: an overview
3. An updated review of adhesively bonded joints in composite materials10.1016/j.ijadhadh.2016.10.010 ↗
4. The stresses in cemented joints10.1115/1.4009336 ↗
5. Smith · 1973 · CR
6. Cohesive zone modeling of interfacial stresses in plated beams10.1016/j.ijsolstr.2009.08.010 ↗
7. On the analysis of adhesively bonded structures: a high order semi-elastic adhesive layer model10.1016/j.compscitech.2007.06.024 ↗
8. Interfacial stresses in beams and slabs bonded with thin plate
9. Linear and higher order displacement theories for adhesively bonded lap joints10.1016/j.ijsolstr.2004.05.024 ↗
10. Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite10.1016/j.compscitech.2004.07.009 ↗
11. Strength and interface failure mechanism of adhesive joints10.1016/j.ijadhadh.2011.12.004 ↗
12. Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials10.1016/j.compstruct.2012.03.002 ↗
13. Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer10.1016/j.ijadhadh.2013.02.006 ↗
14. A review of finite element analysis of adhesively bonded joints10.1016/j.ijadhadh.2011.01.006 ↗
15. Nonlinear finite element analysis of stress and strain distributions across the adhesive thickness in composite single-lap joints10.1016/S0263-8223(99)00106-3 ↗
16. The effect of adhesive thickness on tensile and shear strength of polyimide adhesive10.1016/j.ijadhadh.2012.03.007 ↗
17. Static and fatigue failure analysis of adhesively bonded thick composite single lap joints10.1016/j.compscitech.2013.06.018 ↗
18. Effect of adherend's rigidity on the shear strength of single lap adhesive joints10.1016/j.ijadhadh.2010.12.003 ↗
19. Evaluation of stress concentration effects in single-lap bonded joints of laminate composite materials10.1016/j.ijadhadh.2004.10.002 ↗
20. Micromechanical investigation of damage processes at composite-adhesive interfaces10.1016/j.compscitech.2013.06.013 ↗
21. Predictive strength-fracture model for composite bonded joints10.1016/j.compstruct.2007.01.029 ↗
22. Joining of dissimilar materials10.1016/j.cirp.2015.05.006 ↗
23. Adhesion phenomena in bonded joints10.1016/j.ijadhadh.2012.04.007 ↗
24. Effect of curing conditions on strength development in an epoxy resin for structural strengthening10.1016/j.compositesb.2011.07.006 ↗
25. Peel ply surface treatment for composite assemblies: chemistry and morphology effects10.1016/j.compositesa.2005.02.012 ↗
26. Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal substrates with different surface morphology10.1016/j.compositesb.2015.03.010 ↗
27. A continuum theory of elastic material surfaces10.1007/BF00261375 ↗
28. A general theory of curved deformable interfaces in solids at equilibrium10.1080/01418619808239977 ↗
29. Derivation of the generalized Young-Laplace equation of curved interfaces in nanoscaled solids10.1063/1.2356094 ↗
30. Delamination detection and characterisation of bridging tractions using long FBG optical sensors10.1016/j.compositesa.2007.07.009 ↗
31. Strain monitoring of a single-lap joint with embedded fiber-optic distributed sensors10.1177/1475921711419994 ↗
32. Determination of the strain distribution in adhesive joints using Fiber Bragg Grating (FBG)10.1080/01694243.2012.698120 ↗
33. Monitoring strain gradients in adhesive composite joints by embedded fiber Bragg grating sensors10.1016/j.compstruct.2014.02.014 ↗
34. Measurement of longitudinal strain and estimation of peel stress in adhesive-bonded single-lap joint of CFRP adherend using embedded FBG sensor10.1117/12.917431 ↗