In situ synthesis method and damping characterization of magnesium matrix composites
Source abstract
Abstract
Abstract Magnesium matrix composites reinforced with 8 wt% TiC was in situ synthesized using remelting and dilution technique. X-ray diffraction analysis revealed the presence of TiC phase in sintered block and magnesium matrix composites. Uniform distribution of fine TiC particulates in matrix material was obtained through microstructure characterization. The results of damping characterization revealed that damping capacity of materials is independent of frequency, but dependent on strain and temperature. There were damping peak in damping–strain curve, which is due to the foul and tangle of dislocations. There were two damping peaks at damping–temperature curve under respective temperature of 130 °C and 240 °C. The former damping peak of magnesium matrix composites is due to dislocation motion, and the latter is due to interface and grain boundary sliding. Generally, damping capacity of magnesium matrix composites is higher than that of AZ91 magnesium alloy, which is due to the addition of TiC particulates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Recent magnesium alloy development for automotive powertrain applications
2. Smoot Perry R. High specific modulus magnesium matrix composite. In: Proceedings of the National SAMPE technical conference, advanced materials: looking ahead to the 21st century, vol. 22; 1990. p. 825–33.
3. Metal matrix composites, a smart choice for high damping materials10.1016/S0925-8388(03)00239-1 ↗
4. Enhanced damping of a magnesium alloy by addition of copper10.1016/S0925-8388(02)01131-3 ↗
5. Characterisation of dynamic strain ageing in two magnesium alloys10.1016/j.msea.2004.01.068 ↗
6. Development of a novel magnesium/nickel composite with improved mechanical properties10.1016/S0925-8388(01)01841-2 ↗
7. Application of a model for the work hardening behavior to Mg/SiC composites synthesized using a fluxless casting process10.1016/S0921-5093(01)01845-7 ↗
8. Magnesium strengthened by SiC nanoparticles10.1016/S0921-5093(00)01283-1 ↗
9. In situ synthesis of TiC/Mg composites in molten magnesium10.1016/S1359-6462(03)00014-9 ↗
10. Research development of in-situ magnesium matrix composites and the in-situ reaction thermodynamics of the reaction systems
11. Diffusion path and reaction mechanism between Ti and B4C
12. Ye · 1981
13. Wettability and spreading kinetics of Al and Mg on TiC10.1016/S1359-6462(03)00137-4 ↗
14. Theory of mechanical damping due to dislocations10.1063/1.1722436 ↗
15. Application of dislocation theory to internal friction phenomena at high frequencies10.1063/1.1722485 ↗
16. Investigation on room temperature damping vs strain amplitude behaviors of hypereutectic Al-17Si–xLa alloys
17. Influence of SiC particulate size on the microstructural evolution and mechanical properties of Al–6Ti–6Nb matrix composites10.1016/S0921-5093(00)00897-2 ↗
18. Mechanical spectroscopy of thermal stress relaxation in aluminum alloys reinforced with short alumina fibres10.1002/(SICI)1521-396X(199805)167:1<61::AID-PSSA61>3.0.CO;2-M ↗
19. Damping capacity of SiCw/MgLiAl composites10.1023/A:1006769215579 ↗
20. Characteristics of thermal cycling in a magnesium alloy composite10.1016/S0921-5093(01)01460-5 ↗
21. High damping functional materials prepared by spray deposition10.1016/S0924-0136(00)00644-0 ↗
22. Damping behavior of discontinuously reinforced Al alloy metal-matrix composites10.1007/BF02669639 ↗
23. Internal friction due to precipitation10.1002/pssb.19690320216 ↗
24. Precipitation and excess solid solubility in Mg–Al–Zr and Mg–Zn–Zr processed by spray atomization and deposition10.1016/0921-5093(91)90368-W ↗
25. Zener · 1948