Evolution of microstructures and thermal properties with heat treatment for absorbing, emitting and scattering fibrous medium
Source abstract
Abstract
Abstract The microstructure changes of a fibrous insulation for thermal protection system were examined before and after thermal exposures at different temperatures between 1000 °C and 1400 °C. The consequent thermal properties, i.e., thermal conductivity, extinction coefficient, albedo of scattering, and linear coefficient of phase function at different stages were measured by using a developed experimental device and data processing method. The effects of microstructure changes on the thermal properties degradation were discussed. It was found that the devitrification of mullite and the microstructure changes induced by heat treatment had a significant influence upon the thermal properties, and higher temperature treatment yielded a strong increase in thermal conductivity of fibrous insulation. The results also indicated that the relative contribution of conductive and radiative heat transfer would be re-regulated after high temperature thermal annealing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Radiative Heat Transfer Studies · Aerogels and thermal insulation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Metallic thermal protection system requirements, environments, and integrated concepts10.2514/1.9173 ↗
2. Myers DE, Martin CJ, Blosser ML. Parametric weight comparison of current and proposed thermal protection system (TPS) concepts. AIAA-99-3459.
3. Blosser ML, Chen RR, Schmidt IH, Dorsey JT, Poteet CC, Bird RK. Advanced metallic thermal protection system development. AIAA2002-0504.10.2514/6.2002-504 ↗
4. Fine diameter ceramic fibres10.1016/S0955-2219(00)00090-X ↗
5. Crystallization in heated aluminosilicate fibers
6. Phase transition in materials based on high-alumina fibre
7. Induced conversion of aluminium silicate fibers into mullite and cristobalite by elevated temperatures: a comparative study on two commercial products10.1016/0040-6031(87)80199-5 ↗
8. The De-vitrificaiton of alumino-silicate ceramic fiber materials—the kinetics of the formation of different crystalline phase10.1093/annhyg/41.5.561 ↗
9. Grain growth in alumina–silica fibers10.1023/A:1004539910729 ↗
10. Studies on a probable correlation between thermal conductivity, kinetics of devitrification and changes in fiber radius of an aluminosilicate ceramic vitreous fiber on heat treatment10.1016/S0272-8842(02)00033-0 ↗
11. Suitable steady state methods for measurement of effective thermal conductivity in rigid insulations in heat transmission measurement in thermal insulations
12. Influence of fiber diameter on effective thermal conductivity of thermal insulation
13. Daryabeigi K. Effective thermal conductivity of high temperature insulation for reusable launch vehicle. NASA/TM 1999-208972. p. 1–30.10.2514/6.1999-1044 ↗
14. Intercomparison of insulation thermal conductivities measured by various methods10.1007/s10765-007-0278-8 ↗
15. Chinese national standards: refractory products-method of test for ceramic fibre products. GB/T 17911-2006 [in Chinese].
16. Improved heat-transfer models for fibrous insulations10.1016/0017-9310(93)80037-U ↗
17. Siegel · 1992
18. Heat transfer by gas conduction and radiation in fibrous insulation
19. Radiant heat transfer in fibrous thermal insulation10.1063/1.1709200 ↗
20. Heat transfer in fibrous materials10.1520/JTE10010J ↗
21. Effect of fiber orientation on thermal radiation in fibrous media10.1016/0017-9310(89)90178-6 ↗
22. Quartz-fiber thermal insulation: infrared radiative properties and calculation of radiative-conductive heat transfer10.1115/1.2825859 ↗
23. An inverse analysis to determine conductive and radiative properties of a fibrous medium10.1016/j.jqsrt.2009.03.022 ↗
24. Inverse identification of thermal properties of fibrous insulation from transient temperature measurements10.1007/s10765-009-0680-5 ↗
25. Measurement and analysis by different methods of apparent, radiative, and conductive thermophysical properties of insulation materials10.1068/htjr080 ↗
26. Diffusivity measurement of semi-transparent media: model of the coupled transient heat transfer and experiments on glass, silica glass and zinc selenide10.1016/j.ijheatmasstransfer.2003.07.003 ↗
27. Experimental investigations of the coupled conductive and radiative heat transfer in metallic/ceramic foams10.1016/j.ijheatmasstransfer.2009.05.015 ↗
28. An algorithm for least-squares estimation of non-linear parameters10.1137/0111030 ↗
29. Daryabeigi K. Heat transfer in high-temperature fibrous insulation. AIAA Paper 2002-3332.10.2514/6.2002-3332 ↗
30. Structure and properties of mullite-a review10.1016/j.jeurceramsoc.2007.03.017 ↗
31. Crystal structure development during devitrification of quenched mullite10.1016/S0955-2219(01)00268-0 ↗
32. Change in chemical composition of mullite formed from 2SiO2⋅3Al2O xerogel during the formation process10.1111/j.1151-2916.1987.tb04888.x ↗
33. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
34. Basic aspects of X-ray absorption of quantitative diffraction analysis of powder mixtures10.1021/ac60022a002 ↗
35. Scattering losses in optic fiber materials. I: a new parameterization10.1063/1.332994 ↗
36. Radiative heat transfer in fibrous insulations parts I: analytical study10.1115/1.3245561 ↗
37. Williams SD, Curry DM. Predictions of rigid silica based insulation conductivity. NASA TP. 1993-3276. p. 1–20.
38. Heat transfer model for fibrous insulations
39. Daryabeigi K. Thermal analysis and design of multi-layer insulation for re-entry aerodynamic heating. AIAA Paper 2001-2834.10.2514/6.2001-2834 ↗
40. Thermal conductivity of highly porous mullite material10.1016/j.actamat.2005.03.040 ↗
41. Stauffer T, Joy M, Ayyaswamy P. The effective thermal conductivity of multi-foil insulation as a function of temperature and pressure. In: The 27th AIAA thermophysics conference. Nashville, Tennessee; 1992. p. 1–18.10.2514/6.1992-2939 ↗
42. Effective thermal conductivity of various filling materials for vacuum insulation panels10.1016/j.ijheatmasstransfer.2009.06.029 ↗