journal article·2020-11

Investigation on a novel polysilylaryl-enyne/Ca0.7La0·2TiO3 composite with an ultra-high dielectric constant and excellent temperature resistance

Haiyi Peng, Yanchun Huang, Shifeng Deng, Xiaogang Yao, Huixing Lin

Publisher page

Abstract

Abstract This article reports a novel category of thermosetting composite prepared by compounding a high temperature resistant polysilylaryl-enyne (PSAE) resin with different volume fractions (vol%) of high dielectric constant Ca0·7La0·2TiO3 (CLT) ceramics. The microstructure, dielectric properties and thermal properties of the PSAE/CLT composites were fully investigated. The results show that the PSAE/CLT composite with an ultra-high dielectric constant and low dielectric loss (er = 23.0 and tanδ = 3.4 × 10−3, at 10 GHz) was obtained when the filler volume fraction reached 60%. Meanwhile, the coefficient of thermal expansion of the composite was reduced to 15.1 ppm/°C which could match copper foils. And a high thermal conductivity of 0.918 W/(m·K) could be obtained at 60 vol% filler loading. The glass transition temperatures of the PSAE/CLT composites were over 450 °C which indicate that all the PSAE/CLT composites have an excellent temperature resistance. The novel PSAE/CLT composite has important application prospect in high-frequency communication under a harsh temperature environment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Electromagnetic wave absorption materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Dielectric response of high permittivity polymer ceramic composite with low loss tangent10.1063/1.3200244 ↗
2. Microwave dielectric properties of PTFE/rutile nanocomposites10.1016/j.jallcom.2008.10.092 ↗
3. Dielectric properties of BADCy/Ni0.5Ti0.5NbO4 composites with novel structure fabricated by freeze casting combined with vacuum assisted infiltration process10.1016/j.compscitech.2015.09.017 ↗
4. Novel high dielectric constant and low loss PTFE/CNT composites10.1016/j.ceramint.2018.06.077 ↗
5. Dielectric properties of modified BNT/PTFE composites for microwave RF antenna applications10.1007/s10854-016-4849-y ↗
6. Synthesis and characterization of PTFE/(NaxLi1-x)0.5Nd0.5TiO3 composites with high dielectric constant and high temperature stability for microwave substrate applications
7. Medium dielectric constant and low-loss PTFE composites filled with MgO-LiF co-doped Li2TiO3 particles10.1002/app.47980 ↗
8. Suppression of dielectric loss of PPE/HIPS alloys in microwave region by utilization of MgO filler10.1002/app.47315 ↗
9. Dielectric, mechanical and thermal properties of polymer/BaTiO3 composites for embedded capacitor10.1016/j.compositesb.2012.06.019 ↗
10. Synthesis of silicon-containing arylacetylene resin catalyzed by zinc powder
11. Thermosetting mechanism study of sillicon-containing polyarylacetylene via in situ FTIR and solid-state NMR spectroscopy10.1002/app.47301 ↗
12. Microwave dielectric properties of PTFE/CaTiO3 polymer ceramic composites10.1016/j.ceramint.2011.01.039 ↗
13. Improving the dielectric constant and energy density of poly(vinylidene fluoride) composites induced by surface-modified SrTiO3 nanofibers by polyvinylpyrrolidone10.1039/C4TA04455J ↗
14. Investigating the mechanical properties of high dielectric constant polyetherimide/(Ba0.8Sr0.2)(Ti0.9Zr0.1)O3 composites10.1016/j.compositesb.2011.07.008 ↗
15. Study of the dielectric properties of barium titanate–polymer composites10.1016/j.actamat.2006.02.031 ↗
16. BaTiO3–polyethersulfone nanocomposites with high dielectric constant and excellent thermal stability10.1016/j.compositesb.2010.08.006 ↗
17. Nano- and microsize effect of CCTO fillers on the dielectric behavior of CCTO/PVDF composites10.1016/j.actamat.2011.05.034 ↗
18. Synthesis, structure and total conductivity of A-site doped LaTiO3−δ perovskites10.1016/j.jallcom.2014.12.033 ↗
19. Thermal conductivity of polymer-based composites: fundamentals and applications10.1016/j.progpolymsci.2016.03.001 ↗
20. Preparation and properties of silica filled PTFE flexible laminates for microwave circuit applications10.1016/j.compositesa.2009.05.007 ↗
21. Dielectric properties of SrTiO3/POE flexible composites for microwave applications10.1016/j.jeurceramsoc.2006.11.034 ↗
22. Piezoelectric and dielectric properties of ((K0.475Na0.495Li0.03)NbO3-0.003ZrO2)/PVDF composites10.1007/s11664-019-06978-1 ↗
23. Electrical and thermal properties of low permittivity Sr2Al2SiO7 ceramic filled HDPE composites10.1016/j.ceramint.2012.11.090 ↗
24. Dielectric, thermal and mechanical properties of Sr2ZnSi2O7 based polymer/ceramic composites10.1007/s10854-011-0581-9 ↗
25. Influence of interphase and moisture on the dielectric spectroscopy of epoxy/silica composites10.1016/j.polymer.2005.01.041 ↗
26. A precise numerical prediction of effective dielectric constant for polymer-ceramic composite based on effective-medium theory10.1109/6144.888853 ↗
27. The electrical grid resistance of artificial and natural aggregates
28. Lichtenecker's equation: applicability and limitations10.1016/S0030-4018(99)00695-1 ↗
29. Dielectric properties of 0.25(BZT–BCT)–0.75[(1−x)PVDF–xCCTO] (x=0.02, 0.04, 0.06, 0.08 and 0.1) composites for embedded capacitor applications10.1016/j.compscitech.2013.08.020 ↗
30. Enhancement of dielectric constant in polymer-ceramic nanocomposite for flexible electronics and energy storage applications10.1016/j.compscitech.2018.01.025 ↗
31. Significantly enhanced dielectric performance of poly(vinylidene fluoride-co-hexafluoropylene)-based composites filled with hierarchical flower-like TiO2 particles10.1021/acsami.5b08987 ↗
32. Polymer composites with high dielectric constant10.1080/00150190214285 ↗
33. Multilayer BST-COC composite with enhanced high frequency dielectric properties10.1080/00150190902967154 ↗
34. Microwave dielectric properties of CCTO/PVA composites
35. Low dielectric loss PTFE/CeO2 ceramic composites for microwave substrate applications10.1111/j.1744-7402.2008.02228.x ↗
36. Thermal expansion behavior of thin films expanding freely on water surface
37. Low dielectric loss polytetrafluoroethylene/TeO2 polymer ceramic composites10.1111/j.1551-2916.2007.01914.x ↗
38. Thermo-mechanical, wear and fracture behavior of high-density polyethylene/hydroxyapatite nano composite for biomedical applications: effect of accelerated ageing10.1016/j.jmst.2013.03.020 ↗
39. Thermal, creep-recovery and viscoelastic behavior of high density polyethylene/hydroxyapatite nano particles for bone substitutes: effects of gamma radiation10.1186/1475-925X-13-125 ↗
40. Strontium-rich injectable hybrid system for bone regeneration10.1016/j.msec.2015.10.038 ↗
41. Structure−Property relationships in nanocomposites based on cyanate ester resins and 1-heptyl pyridinium tetrafluoroborate ionic liquid10.1016/j.polymer.2018.06.015 ↗
42. Synthesis and characterization of cyanate ester functional benzoxazine and its polymer10.1021/acs.macromol.5b02285 ↗
43. Preparation and properties of graphene nanosheets/carbon foam composites10.1016/j.jaap.2015.11.003 ↗
44. Synthesis and properties of 1,3,4-oxadiazole-containing high-performance bismaleimide resins10.1016/j.polymer.2006.10.040 ↗
45. Preparation, mechanical and thermal properties of functionalized graphene/polyimide nanocomposites10.1016/j.compositesa.2012.03.026 ↗
46. Fabrication of thermal conductivity enhanced polymer composites by constructing an oriented three-dimensional staggered interconnected network of boron nitride platelets and carbon nanotubes10.1021/acsami.8b09703 ↗
47. Non-covalent poly (2-ethylhexyl acrylate) (P2EHA)/functionalized graphene/h-boron nitride flexible composites with enhanced adhesive and thermal conductivity by a facilitated latex approach10.1016/j.compositesa.2017.01.020 ↗
48. Thermal pyrolytic behaviors and kinetics of silicon-containing arylacetylene resin
49. Colours in metal glasses and in metallic films10.1098/rspl.1904.0058 ↗
50. A variational approach to theory of effective magnetic permeability of multiphase materials10.1063/1.1728579 ↗
51. Thermal conductivity of heterogeneous two-component systems10.1021/i160003a005 ↗
52. Improving the thermal and electrical properties of polymer composites by ordered distribution of carbon micro- and nanofillers10.1016/j.ijheatmasstransfer.2019.04.043 ↗
53. Electrical and thermal conductivity of polymers filled with metal powders10.1016/S0014-3057(02)00064-2 ↗
54. Electrical and thermophysical behaviour of PVC-MWCNT nanocomposites10.1016/j.compscitech.2007.11.014 ↗
55. Effect of interface on the thermal conductivity of carbon nanotube composites10.1016/j.ijthermalsci.2006.11.003 ↗