Microwave absorbing ceramic coatings with multi-walled carbon nanotubes and ceramic powder by polymer pyrolysis route
Source abstract
Abstract
Abstract Glass powder, talcum powder and multi-walled carbon nanotubes (MWCNTs) filled silicone resins were prepared for microwave absorbing coatings which can be used at elevated temperature. The impact strength and adhesive power, complex permittivity and reflection loss of the coatings at room temperature and after heat treatment were studied. Both the adhesive power and impact strength of the coatings can be adjusted by the glass powder content, and enhanced after heat treatment. The real part (e′) of permittivity of the coatings decreased slightly while the imaginary part (e″) kept almost constant after heat treatment. The reflection loss values below −10 dB can be obtained in the frequency range of 12.7–18 GHz at room temperature and 12.4–15.6 GHz at 600 °C for the coating after heat treatment. These results indicated such coatings containing glass powder, talcum powder and MWCNTs can be a promising microwave absorbing ceramic coating with both good mechanical properties and microwave absorption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Precursor-derived covalent ceramics10.1002/adma.19950070903 ↗
2. Ceramics via polymer pyrolysis10.1146/annurev.ms.14.080184.001501 ↗
3. Silicon-based polymer-derived ceramics: synthesis properties and applications-a review10.2109/jcersj.114.425 ↗
4. Stresses occurring during joining of ceramics using preceramic polymers10.1111/j.1151-2916.2001.tb00995.x ↗
5. Novel microcellular ceramics from a silicone resin10.1111/j.1551-2916.2004.00152.x ↗
6. Polysilsesquioxane derived ceramic foams with gradient porosity10.1016/j.actamat.2004.10.039 ↗
7. Development of dense filler-free polymer-derived SiOC ceramics by field-assisted sintering10.1111/j.1551-2916.2008.02730.x ↗
8. Preparation of amorphous composites with polymer-derived silicon nitride matrix reinforced by three-dimensional silica fiber10.1016/j.jnoncrysol.2005.11.014 ↗
9. Micropatterned ceramic surfaces by coating with filled preceramic polymers10.1111/j.1551-2916.2009.03228.x ↗
10. Ti-based ceramic composites derived from polymer pyrolysis10.1016/j.jeurceramsoc.2006.04.035 ↗
11. Complex permittivity and microwave absorption properties of carbon nanotubes/polymer composite: a numerical study10.1016/j.physleta.2008.02.015 ↗
12. Nonlinear optical properties of some polymer/multi-walled carbon nanotube composites10.1016/S0009-2614(00)00091-9 ↗
13. The 500MHz to 5.50GHz complex permittivity spectra of single-wall carbon nanotube-loaded polymer composites10.1016/S0009-2614(00)00196-2 ↗
14. Electronic and electromagnetic properties of nanotubes10.1103/PhysRevB.57.9485 ↗
15. Electromagnetic wave absorption properties of carbon nanotubes-epoxy composites at microwave frequencies10.1063/1.3477195 ↗
16. Spray deposited fluoropolymer/multi-walled carbon nanotube composite films with high dielectric permittivity at low percolation threshold10.1016/j.carbon.2008.10.042 ↗
17. Optimization of electromagnetic matching of carbonyl iron/BaTiO3 composites for microwave absorption10.1016/j.jmmm.2010.10.021 ↗
18. Fabrication and electromagnetic characteristics of electromagnetic absorbing sandwich structures10.1016/j.compscitech.2005.05.034 ↗
19. Large dielectric constant of the chemically functionalized carbon nanotube/polymer composites10.1016/j.compscitech.2008.04.019 ↗
20. Comparison study on the effect of carbon nano materials for single-layer microwave absorbers in X-band10.1016/j.compscitech.2007.10.035 ↗
21. Fabrication of microcellular ceramics using gaseous carbon dioxide10.1111/j.1151-2916.2003.tb03641.x ↗
22. Preceramic paper-derived ceramics10.1111/j.1551-2916.2008.02752.x ↗
23. Engineering porosity in polymer-derived ceramics10.1016/j.jeurceramsoc.2007.12.002 ↗
24. Consolidation of polymer-derived SiC matrix composites: processing and microstructure10.1016/S0266-3538(02)00151-3 ↗
25. Carbon fiber and nanotube based composites with polypyrrole fabric as electromagnetic absorbers10.1088/0964-1726/13/5/009 ↗
26. Microwave-absorbing and mechanical properties of carbonyl-iron/epoxy-silicone resin coatings10.1016/j.jmmm.2008.07.011 ↗
27. Iron based carbon nanocomposites for electromagnetic wave absorber with wide bandwidth in GHz range10.1007/s00339-005-3417-8 ↗
28. Vinoy · 1996
29. High dielectric loss and its monotonic dependence of conducting dominated multiwalled carbon nanotubes/silica nanocomposite on temperature ranging from 373 to 873K in X-band10.1063/1.3152764 ↗
30. High-temperature microwave absorption and evolutionary behavior of multiwalled carbon nanotube nanocomposite10.1016/j.scriptamat.2009.03.048 ↗
31. Electrical and thermal properties of carbon nanotube bulk materials: experimental studies for the 328–958K temperature range10.1103/PhysRevB.75.205407 ↗