High-temperature tribological performance of hybrid PTFE/Nomex fabric/phenolic composite
Source abstract
Abstract
Abstract Producing fabric composites with improved high-temperature tribological property is highly desired for their use in practical application, yet still challenging. Herein, we employed MoSi2 as anti-oxidant and filled it into the hybrid PTFE/Nomex fabric/phenolic composite. The high-temperature tribological properties of the fabric composites were evaluated on a pin-on-disk tribometer. The results showed that the MoSi2 filled fabric composites displayed much lower wear rates in high-temperature environment, comparing to that of unfilled fabric composite. Moreover, the antiwear property of the MoSi2 filled fabric composite can be further improved by treating the fabric with air-plasma, as the bonding strength between the fabric and resin was evidently enhanced. The wear behaviors and the corresponding wear mechanisms of the composites were discussed based on the characterizations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Shen XJ, Gao PD, Liu ZL, Chen XY. Elastic properties of the fabric liner and their influence on the wear depth of the spherical plain bearing. J Nanomater doi:10.1155/2014/836386.10.1155/2014/836386 ↗
2. Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures10.1016/j.matdes.2011.11.006 ↗
3. Three-dimensional thermal analysis of spherical plain bearings with self-lubricating fabric liner10.4028/www.scientific.net/AMR.97-101.3366 ↗
4. Enhancement on interlaminar shear strength and tribological properties in water of ultra high molecular weight polyethylene/glass fabric/phenolic laminate composite by surface modification of fillers10.1016/j.matdes.2013.10.053 ↗
5. Influence of graphite filler on two-body abrasive wear behaviour of carbon fabric reinforced epoxy composites10.1016/j.matdes.2009.11.006 ↗
6. Grey-based Taguchi approach for wear assessment of SiC filled carbon–epoxy composites10.1016/j.matdes.2012.04.051 ↗
7. Montmorillonite reinforced phenol formaldehyde resin: preparation, characterization, and application in wood bonding10.1016/j.ijadhadh.2013.12.011 ↗
8. Friction and wear studies on brake-pad materials based on newly developed resin10.1016/j.wear.2006.12.050 ↗
9. Micro-structural evolution of phenol–formaldehyde resin modified by boron carbide at elevated temperatures10.1016/j.matchemphys.2009.10.044 ↗
10. Preparation and thermal stability of boron-containing phenolic resin/clay nanocomposites10.1016/j.polymdegradstab.2007.10.021 ↗
11. Study on the pyrolysis of phenol-formaldehyde (PF) resin and modified PF resin10.1016/j.tca.2009.07.012 ↗
12. The effect of titanium incorporation on the thermal stability of phenol-formaldehyde resin and its carbonization microstructure10.1016/j.polymdegradstab.2012.12.006 ↗
13. Toughening strategies for MoSi2-based high temperature structural silicides10.1016/S0966-9795(00)00044-3 ↗
14. Rapid solution hardening at elevated temperatures by substitutinal Re alloying in MoSi210.1016/S1359-6454(99)00380-8 ↗
15. Solid solution hardening and softening in MoSi2 alloys10.1016/S1359-6462(00)00698-9 ↗
16. A study of MoSi2–MoS2 coatings fabricated by SHS casting route10.1016/S0921-5093(99)00546-8 ↗
17. Fabrication and characterization of SiC/MoSi2 composites10.1016/S0921-5093(97)00553-4 ↗
18. Combined effect of air-plasma treatment and lubricant filling on the dry sliding wear behavior of hybrid PTFE/Nomex fabric/phenolic composite10.1016/j.compscitech.2014.06.015 ↗
19. Friction and wear properties of carbon fabric composites filled with nano-Al2O3 and nano-Si3N410.1016/j.compositesa.2005.08.017 ↗
20. Enhanced wear resistance of hybrid PTFE/Kevlar fabric/phenolic composite by cryogenic treatment10.1007/s10853-009-3862-4 ↗
21. The effects of MoSi2 on the oxidation behavior of carbon/carbon composites10.1016/S0008-6223(00)00248-7 ↗
22. Effect of plasma treatment of Kevlar fabric on the tribological behavior of Kevlar fabric/phenolic composites10.1016/j.triboint.2008.06.004 ↗
23. Tribological properties of modified carbon fabric/polytetrafluoroethylene composites10.1016/j.wear.2012.04.021 ↗
24. Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites10.1016/j.wear.2008.08.005 ↗
25. Friction and wear properties of fabric/phenolic composites with plasma treated-hybrid glass/PTFE fabric10.1016/j.compscitech.2006.06.010 ↗