journal article·2004-11

Reconsideration of crack deflection at planar interfaces in layered systems

Woong Lee, Yo-Han Yoo, Hyunho Shin

Composites Science and Technology· Volume 64· Issue 15
Publisher page

Abstract

Deflection of a crack at a planar bi-material interface in a layered system was investigated using a finite element method from the standpoint of the effects of length scales of two competing putative crack extensions: crack penetration vs. crack deflection. It was predicted that when these length scales are comparable to or larger than the size of K-dominant field and the intact layer is stiffer than the cracked layer, crack deflection would occur under energetically less favourable conditions than those derived from K-dominant field solutions. To the contrary, the crack deflection criteria were predicted to be insensitive to the length scale of the putative penetration and deflection if the cracked layer is stiffer than the intact layer. It was further predicted that when the deflection length is shorter than the penetration length, crack deflection could occur under energetically more favourable condition when the cracked layer is stiffer than the intact layer, and vice versa. Predictions herein better explained the experimental observations on bi-layer systems elsewhere than the existing theories.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Numerical methods in engineering · Ultrasonics and Acoustic Wave Propagation · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Gordon · 1976
2. Hull · 1996
3. Chawla · 1993
4. Transition between cohesive and interfacial failure in a laminate10.1098/rspa.1975.0102 ↗
5. Crack deflection at an interface between dissimilar elastic materials10.1016/0020-7683(89)90021-8 ↗
6. Calculation, measurement, and control of interface strength in composites10.1111/j.1151-2916.1993.tb03784.x ↗
7. Energy criterion for crack deflection at an interface between two orthotropic media10.1016/0022-5096(94)90034-5 ↗
8. Crack deflection at an interface between dissimilar elastic materials: role of residual stresses10.1016/0020-7683(94)90025-6 ↗
9. Deflection and penetration of cracks at an interface between two dissimilar materials10.1016/0956-7151(94)90422-7 ↗
10. Criteria for crack deflection/penetration for fiber-reinforced ceramic matrix composites10.1016/S0266-3538(98)00043-8 ↗
11. A revisited criterion for crack deflection at an interface in a brittle material10.1016/S0266-3538(01)00067-7 ↗
12. Edge-bonded dissimilar orthogonal elastic wedges10.1115/1.3564739 ↗
13. Crack point stress singularities at a bi-material interface10.1115/1.3630064 ↗
14. Mixed mode cracking in layered materials10.1016/S0065-2156(08)70164-9 ↗
15. Hutchinson JW. Private communication with W.J. Clegg, 1992
16. A cohesive zone model for cracks terminating at a bimaterial interface10.1016/S0020-7683(96)00144-8 ↗
17. Deflection versus penetration of a wedge-loaded crack: effects of branch-crack length and penetrated-layer width10.1016/S1359-8368(00)00007-X ↗
18. The fabrication and failure of laminar ceramic composites10.1016/0956-7151(92)90471-P ↗
19. Fracture behaviour of ceramic laminates in bending. Part II – comparison of model predictions with experimental data10.1016/0956-7151(93)90015-K ↗
20. A path independent integral and approximation analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
21. On the J-integral for bi-material bodies10.1007/BF00040155 ↗
22. The virtual crack extension method for nonlinear material behaviour10.1016/0045-7825(77)90023-8 ↗
23. Energy release rate along a three-dimensional crack front in a thermally stressed body10.1007/BF00034019 ↗
24. Elastic–plastic analysis of crack on bimaterial interfaces: Part I – small scale yielding10.1115/1.3173676 ↗
25. Crack tip finite elements are unnecessary10.1002/nme.1620090302 ↗
26. Ewalds · 1989
27. Kinloch · 1983
28. Growth of interface defects and its effect on crack deflection and toughening criteria10.1016/S1359-6454(96)00068-7 ↗
29. Delamination study using four-point bending of bilayers10.1023/A:1018692110821 ↗
30. On the micromechanical failure modes in a class of ideal brittle matrix composites. Part 1 Coated-fiber composites10.1016/S1359-8368(97)00002-4 ↗
31. Interface debonding ahead of a primary crack10.1016/S0022-5096(99)00101-5 ↗