Mechanical behaviour of ±55° filament-wound glass-fibre/epoxy-resin tubes—III. Macromechanical model of the macroscopic behaviour of tubular structures with damage and failure envelope prediction
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Mechanical behaviour of ±55° filament-wound glass-fibre/epoxy-resin tubes: Part I—Microstructure analyses and mechanical behaviour and damage mechanisms of composite tubes under pure tensile, pure internal pressure and combined loading10.1016/S0266-3538(96)00124-8 ↗
2. Mechanical behaviour of ±55° filament-wound glass-fibre/epoxy-resin tubes: Part II—Micromechanical modelling of the damage initiation-competition of the different mechanisms10.1016/S0266-3538(96)00125-X ↗
3. Karayaka, M., Srinivasan, S., Miyase, A. and Wang, S. S., Leakage damage and failure of glass-fibre reinforced composite tubular vessels under combined internal pressure and axial loading. In Proceedings of 10th Int. Conf. on Composite Materials (ICCM-10) Vol. I. Whistler, B. C., Canada, 1995, pp. 747–754.
4. The rate-dependent behaviour of ±55° filament-wound glass-fibre/epoxy tubes under biaxial loading10.1016/0266-3538(95)00119-0 ↗
5. Hinton, M. J., Soden, P. D. and Kaddour, A. S., Strength of composite laminates under biaxial loads. In Proceedings of 10th Int. Conf. on Composite Materials (ICCM-10), Vol. IV. Whistler, B.C., Canada, 1995, pp. 65–72.
6. Failure of glass/polyester filament wound pipe10.1016/0010-4361(78)90513-X ↗
7. The strength of a filament wound composite under biaxial loading10.1016/0010-4361(78)90177-5 ↗
8. Foral, R. F. and Gilbreath, D. R., Delamination failure mode in filament wound composite tube. ASTM STP 1012, 1989, 313–325.10.1520/STP10422S ↗
9. Influence of winding angle on the strength and deformation of filament-wound composite tubes subjected to uniaxial and biaxial loads10.1016/0266-3538(93)90182-G ↗
10. Prediction of crack development and stiffness degradation in angle-ply filament wound pipes
11. Predicting the long term fatigue behaviour of filament wound glass fibre/epoxy matrix pipes
12. Fatigue behaviour of glass-fibre/epoxy-matrix filament-wound pipes: tension loading tests and results10.1016/0266-3538(94)90029-9 ↗
13. Mechanical performance of thin-walled tubular composite elements under uniaxial loading part 1: tensile behaviour10.1016/0263-8223(95)00013-5 ↗
14. Mechanical performance of thin-walled tubular composite elements under uniaxial loading part 2: compressive behaviour10.1016/0263-8223(95)00014-3 ↗
15. Microscopy of failure mechanisms in filament-wound pipe10.1007/BF01028340 ↗
16. The stress field in a cylindrically anisotropic body under two-dimensional surface tractions10.1115/1.3422790 ↗
17. Roy, A. K. and Tsai, S. W., Pressure vessels, Composite Design. Think Composite Publisher, Dayton, OH, 1987, pp. 23-1–23-21.
18. Composite laminated shells under internal pressure10.2514/3.11121 ↗
19. Sayir, M. B. and Motavalli, M., Fibre-reinforced laminated composite tubes with free ends under uniform internal pressure. J. Mech. Phys. Solids, 1995, 1691–1725.10.1016/0022-5096(95)00055-N ↗
20. Stress state analyses of a ±55° filament-wound composite tube with damage effect10.1016/S0263-8223(97)80015-3 ↗
21. Three-dimensional effective elastic constants for thick laminates10.1177/002199838802200703 ↗
22. Theoretical through-thickness elastic constants for filament-wound tubes10.1016/0020-7403(94)90006-X ↗
23. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
24. A failure criterion shows the direction, Kunststoffe combined with German
25. Kroll, L. and Hufenbach, W., New proof of laminate design by a physically based failure criterion. In Proceedings of 10th Int. Conf. on Composite Materials (ICCM-10), Vol. I. Whistler, B.C., Canada, 1995, pp. 715–722.
26. Dontchev, D., Bai, J. B., Djafari, V. and Bompard, Ph., Whitening phenomenon in a ±55° filament-wound glass-fibre/epoxy-resin tubes, submitted.
27. Arsène, A. and Bai, J. B., A new approach to measuring transverse properties of structural tubing by a ring test. Int. J. of Testing and Evaluation, 1996, 386–391.10.1520/JTE11461J ↗
28. Arsène, A. and Bai, J. B., A new approach to measuring transverse properties of structural tubing by a ring test—experimental investigation, Int. J. Testing and Evaluation, 1998, 26–30.10.1520/JTE11966J ↗
29. Maire, J. F., Etude théorique et expérimentale du comportement de matériaux composites en contraintes planes. Ph. D thesis, Université de Franche-Comté, 1992.
30. Le Moal, P., Pérreux, D. and Varchon, D., Viscoelastic behaviour of composite: comparison between a self-consistent model and experimental data. In Proceedings of the 9th Int. Conf. on Composite Materials, Vol. I. Madrid, Spain, 1993, pp. 715–722.